Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 9 of 9 for “"Axle Detection"”.

  1. Vehicle Axle Detection and Spacing Calibration Using MEMS Accelerometer

    … for vehicle classification based on axle count and spacing was designed, tested, and applied to the pavement. Vehicle-pavement interaction was collected by the vibration sensor while vehicle axle count and spacing were calibrated later. Collected vibration data also used to analyze …

    vt Repository record for Vehicle Axle Detection and Spacing Calibration Using MEMS Accelerometer (opens in a new tab)

  2. Non-intrusive bridge weigh-in-motion: integrating geophones and strain sensors for accurate vehicle characterization.

    … and strain sensors to accurately determine axle loads, axle spacing, and Gross Vehicle Weight (GVW) in regular traffic flow. The research methodology consists of bridge span instrumentation, data acquisition, processing, storage, and analysis, detailing the methods for extracting vehicle …

    manitoba Repository record for Non-intrusive bridge weigh-in-motion: integrating geophones and strain sensors for accurate vehicle characterization. (opens in a new tab)

  3. An Enhanced Bridge Weigh-in-motion Methodology and A Bayesian Framework for Predicting Extreme Traffic Load Effects of Bridges

    … technology is first presented. Then, a novel axle detection method using wavelet transformation of the bridge global response is proposed. Simulation results demonstrate that the proposed axle detection method can accurately identify vehicle axles, except for cases with rough road surface …

    lsu-thes Repository record for An Enhanced Bridge Weigh-in-motion Methodology and A Bayesian Framework for Predicting Extreme Traffic Load Effects of Bridges (opens in a new tab)

  4. Weigh-in-Motion Auto-Calibration Using Automatic Vehicle Identification

    … at highway locations to record vehicle weights, axle spacing, vehicle class, travel speed, vehicle length, and traffic volume. These data elements support effective transportation planning, infrastructure design, and policy development. Therefore, it is important that WIM sensors supply accurate …

    arkansas Repository record for Weigh-in-Motion Auto-Calibration Using Automatic Vehicle Identification (opens in a new tab)

  5. Simulation Of Bridge Weigh-In-Motion System Integrated With Bridge Safety

    … the first choice for application. FAD (Free-of-Axle-Detector) or NOR (Nothing-On-Road) B-WIM system works well, but only if the system detects axle locations. In the USA, there are challenges for some beam-and-slab bridges. If the vehicle wheels are too close to the girders, the strain of the …

    uab Repository record for Simulation Of Bridge Weigh-In-Motion System Integrated With Bridge Safety (opens in a new tab)

  6. Klasifikace vozidel využívající pole magnetometrů

    Tato bakalářská práce se zabývá klasifikací vozidel na základě dat získaných z magnetometrů instalovaných v blízkosti vozovky. Jako referenční data byla využita data ze systému WIM. Práce popisuje proces zpracování magnetometrických signálů, filtraci dat, separaci průjezdů vozidel a detekci náprav. …

    brno-tech Repository record for Klasifikace vozidel využívající pole magnetometrů (opens in a new tab)

  7. Enhancing bridge weigh-in-motion system by accurate observation of the velocity and axle spacings of moving truck using a geophone sensor

    … the Gross Vehicle Weight (GVW of a truck) and Axle weights determines the strength and the bridge deck and girders' load-bearing capability. The GVW is computed using the bridge Weigh in Motion (BWIM) system. This paper explores a new methodology utilizing geophones to estimate the velocity, …

    manitoba Repository record for Enhancing bridge weigh-in-motion system by accurate observation of the velocity and axle spacings of moving truck using a geophone sensor (opens in a new tab)

  8. Simulation Of Bridge Responses To Heavy Vehicles

    … system. Another great challenge of the B-WIM is axle detectability. The traditional B-WIM system fails to detect the axles when subjected to multiple heavy vehicles passing on the bridge at the same time. In order to address these issues properly the sophisticated 3 dimensional finite element …

    uab Repository record for Simulation Of Bridge Responses To Heavy Vehicles (opens in a new tab)

  9. Tvorba náhradních metrik a zpracování signálu pro edge-computing

    Tato diplomová práce se zabývá návrhem metodiky pro lokální zpracování záznamů průjezdů vlakových souprav ze stacionárního měřicího systému s piezoelektrickými senzory typu MFC umístěnými na kolejnici. Teoretická část shrnuje principy edge computingu, stacionární monitorování železniční …

    brno-tech Repository record for Tvorba náhradních metrik a zpracování signálu pro edge-computing (opens in a new tab)