Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 80 for “"B4C"”.
-
Mechanical Properties of Boron Carbide (B4C)
Boron carbide (B4C) is one of the most important opaque boride ceramics that has high hardness and Young's modulus that along with low density lead to a significant resistance to ballistic impact and, thus, B4C is broadly used as a protective material. B4C has also high neutron capturing cross …
-
Atomization of JP-10/B4C gelled slurry fuel
The atomization of a gelled boron slurry fuel using two commercially available airblast atomizers was studied at atmospheric pressure in non-reacting flow. The atomization of water was also characterized for comparison. Each atomizer was operated at two different liquid mass flow rates and several …
-
Effect Of Neutron Radiation On The Mechanical Properties Of B4c
B4C is an important engineering ceramic used in a number of different applications. One of the promising applications of B4C is in the nuclear industry. B4C has a high neutron absorption cross-section (600 barns) and that is why it can absorb neutrons without forming long lived radio nuclides. As a …
-
Technique to measure heats of reaction of Ti-B, Al-Ti-B, and Al-Ti-B4C powder blends
… to two systems of interest, Al-Ti-B, and Al-Ti-B4C. In all three investigations, x-ray diffraction is used to characterize the product phases of the reactions to determine the extent and identity of the product phases and any by-products that may have formed as a result of adding the initiation …
-
Processability of Nickel-Boron Nanolayer Coated Boron Carbide
… focuses on the processability improvement of B4C, especially the compaction and sintering improvement of B4C by applying a Ni-B nanolayer coating on individual B4C particles. A modified electroless coating procedure was proposed and employed to coat nanometer Ni-B layer onto micron-sized B4C …
-
Processing-Structure-Property Relationships of Spark Plasma Sintered Boron Carbide and Titanium Diboride Ceramic Composites
… in spark plasma sintered (SPS) boron carbide (B4C) and B4C-titanium diboride (TiB2) ceramic composites. SPS allowed for consolidation of both B4C and B4C-TiB2 composites without sintering additives, residual phases, e.g., graphite, and excessive grain growth due to long sintering times. A …
-
IMPROVING THE MATERIAL PROPERTIES OF BORON CARBIDE THROUGH ELEMENTAL INCLUSION
Boron carbide (B4C) is a modern ceramic designed as a lightweight, high-hardness material capable of defeating ballistic threats. B4C is the third hardest ceramic known to man and has a density of 2.52 g/cm3. This ceramic is ideal for applications where the areal density is critical. A current …
-
High-temperature plastic deformation of micro and nano-boron carbide and B4C-based composites prepared by spark plasma sintering (SPS): experimental and modelling
Deformación plástica a alta temperatua de carburo de boro microy nanoestructurado y materiales compuestos basados en éste preparados mediante sinterizado por chispa de plasma (SPS): experimentos y modelización. Palabras clave: carburo de boro, deformación plástica, resistencia a la fractura, …
-
Lehké keramické materiály pro balistickou ochranu
… spracovania keramiky na báze karbidu bóru B4C a demonštrácia rámca na vyhodnotenie balistickej odolnosti materiálu na základe mechanických vlastností. Pomocou výstupov z teoretickej časti bol pripravený experiment, príprava kompozitného materiálu (B4C + Si, B4C + Ti) metódou Spark plasma …
-
MECHANICAL PROPERTIES OF NANO BORON NITRIDE AND MICRO BORON CARBIDE REINFORCED ALUMINUM COLD SPRAY COATINGS
… Using commercially pure aluminum powder, 1-3 μm B4C powder, and BNNTs, multiple reinforced metal matrix composite powders were fabricated via high energy ball milling (HEBM). The powder compositions included an Al control, a 4 vol.% B4C composition, a 4 vol.% BNNT composition, and a 2 vol.% B4C …
-
DETERMINING CHANGES IN THE DYNAMIC MATERIAL RESPONSE OF BORON CARBIDE ABOVE THE HUGONIOT ELASTIC LIMIT FROM SILICON ELEMENTAL INCLUSION
Boron carbide (B4C) is a well-known ceramic demonstrating excellent hardness and compressive strength while maintaining a low density (2.52 g/cm3). Despite its promising characteristics, catastrophic failure is observed for impact pressures near and above the Hugoniot elastic limit (HEL). Several …
-
Mechanical Properties of Particulate-Reinforced Boron Carbide Composites
The mechanical properties of boron carbide (B4C) with 10 and 20 vol% particulate inclusions of commercially available nano-sized alpha-phase silicon carbide (a-SiC) or micron-sized titanium diboride (TiB2) were investigated so as to produce a fine-grained material with high hardness, toughness, and …
-
Processing of Boron Carbide
… complex shaped body armor. Pressureless sintered B4C relative densities as high as 96.7% were obtained by optimizing the soak temperature, and holding at that temperature for the minimum time required to reach terminal density. Although the relative densities of pressureless sintered specimens …
-
Evaluating Processing–Property Relationships in Metallic Alloys and Metal-Ceramic Composites Fabricated with Direct-Write Technique
… alloy Fe38.5Mn20Co20Cr15Si5Cu1.5 and Ti6Al4V-B4C metal-ceramic composite. Slurries with optimum rheology were developed for printing the alloys, and processing was carried out using pressureless-solid state sintering. Slurries with different powder particle size distributions were designed to …
-
Processing and Characterization of Mg Matrix Composites Reinforced with TiC and TiB2 Phases using an In-situ Reactive Infiltration Technique
… in-situ from the starting powders of Ti and B4C without any addition of a third metal powder such as Al. The molten magnesium infiltrates the preform of 3Ti-B4C by capillary forces. Furthermore, adding Mg or MgH2 powder with different weight percentages to the 3Ti-B4C preforms was used in an …
-
Processing of nano-sized boron carbide powder
Recent studies indicate B4C nanopowder may provide additional advantages without loss of established properties. In this study, preliminary forms of graphite-coated B4C nanopowders on the order of 20-40 nm with various additives were sintered and analyzed. Methanol washing was performed on the …
-
Extrémně rychlé slinování pokročilých keramických materiálů
… vyšší. Přidání slitiny titanu a křemíku do B4C významně zvýšilo finální hustotu, což byl hlavní důvod ovlivnění mechanických vlastností. Vzorek B4C + 1.0Ti (1 obj. % Ti slitiny) dosáhl nejvyšší tvrdosti 3628.5 ± 452.6 HV1 (16.2% vyšší než čistý B4C) s lomovou houževnatostí 2.11 ± 0.25 MPa …
-
Characterization of Hydrogenated Boron Carbide and Boron Carbon Nitride Thin Films and Applications
… properties from graphite to boron carbide (B4C), boron nitride (BN), boron carbon nitride (BCN) compounds going from metallic to semiconducting to insulating. BCN compounds combine properties of diamond to display excellent mechanical properties and reproduce BN semiconducting properties …
-
Fabrication of Surface Metal Matrix Composites Using Friction Stir Processing
… composites reinforced with Al2O3, SiC, and B4C were tested and compared. Tensile tests demonstrated increases in yield strength by 20, 32, and 38 percent compared to the matrix alloy for composites containing Al2O3, SiC, and B4C, respectively. The average microhardness value within the stir …
-
Design and Performance of Metal Matrix Composite Composed of Porous Boron Carbide Created by Magnetic Field-Assisted Freeze Casting Infiltrated with Aluminum (A356)
… freeze-casting was used to create porous B4C ceramic preforms. An optimum slurry consisted of a mixture of B4C powders with 6 wt.% Er2O3 powder in an H2O-PVA solution and was cooled at a rate of 1 °C/min from room temperature to -30 °C resulting in porous green state ceramic preform with …
Page 1 of 4