Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 102 for “"BEOL"”.

  1. Zirconium oxide-based dielectrics for BEoL decoupling applications

    … im Back-End-of-Line-Bereich (BEoL) des 22-nm-Halbleitertechnologieknotens. Das Hauptziel hierbei ist es, stabile Kondensatoren mit hoher Kapazitätslinearität zu schaffen, neben niedrigen Leckströmen und verbesserter Zuverlässigkeit. Um dies zu erreichen, werden …

    qucosa-diss

  2. Applications of Raman Spectroscopy in Cu-CMP and in BEOL Cleaning Chemistries

    In copper chemical mechanical planarization (CMP), in situ detection of barrier to dielectric layer transition is typically done using an optical reflectance technique. The introduction of carbon doped oxides (CDOs) as low-dielectric constant (k) materials for dielectric layers has opened up the …

    arizona-thes Repository record for Applications of Raman Spectroscopy in Cu-CMP and in BEOL Cleaning Chemistries (opens in a new tab)

  3. Advancing SiGe HBT Performance: A Study on RF-SOA Prediction, BEOL Engineering, and Layout-Driven Reliability Optimization

    … This work explores the impact of device layout, BEOL stress engineering, and aging mechanisms on SiGe HBT reliability and breakdown performance. Through a combination of experimental characterization, predictive aging models, and pulsed-mode measurements, we demonstrate how optimized layout …

    gatech Repository record for Advancing SiGe HBT Performance: A Study on RF-SOA Prediction, BEOL Engineering, and Layout-Driven Reliability Optimization (opens in a new tab)

  4. Experimental and theoretical study of on-chip back-end-of-line (BEOL) stack fracture during flip-chip reflow assembly

    … ICs have on-chip back-end-of-line (BEOL) layers that consist of copper traces and vias interspersed with low-k dielectric materials. These layers have thicknesses in the range of 100 nm near the transistors and 1000 nm away from the transistors close to the solder bumps. In such BEOL …

    gatech Repository record for Experimental and theoretical study of on-chip back-end-of-line (BEOL) stack fracture during flip-chip reflow assembly (opens in a new tab)

  5. TOWARDS INTEGRATION OF GRAPHENE IN ADVANCED CMOS INTERCONNECT TECHNOLOGY

    … graphene is ideally suited for back-end of line (BEOL) technology to boost the performance of on-chip copper (Cu) interconnects. However, the lack of BEOL compatible methods has stymied the true evaluation of Cu/graphene hybrid (Cu-G) technology. The objectives of this thesis proposal are to …

    purdue-thes Repository record for TOWARDS INTEGRATION OF GRAPHENE IN ADVANCED CMOS INTERCONNECT TECHNOLOGY (opens in a new tab)

  6. Back-End-of-Line Mechanical Stress Effects in SiGe HBTs at Cryogenic Temperatures

    … routing (referred to as the back-end-of-line, or BEOL) above and in the immediate vicinity of the active devices. The impact of BEOL stress on SiGe HBTs at crygenic temperatures has been presented in [1]. This work does a deeper examination of the theoretical and measured impact of BEOL stress on …

    gatech Repository record for Back-End-of-Line Mechanical Stress Effects in SiGe HBTs at Cryogenic Temperatures (opens in a new tab)

  7. Exploration, Modeling, and Optimization of Advanced Interconnects: Solutions to Node Scaling Challenges

    … co-optimization flow to evaluate BEOL improvements at the advanced nodes. The modeling framework includes the BEOL impact on circuit performance (inter-cell connections) as well as wire parasitics within standard cells and SRAM memory blocks (intra-cell connections) and their …

    gatech Repository record for Exploration, Modeling, and Optimization of Advanced Interconnects: Solutions to Node Scaling Challenges (opens in a new tab)

  8. Development of ferroelectric tunnel junction devices based on hafnia zirconia films for neuromorphic applications

    … bilayer FTJ devices into CMOS back-end-of- line (BEOL) processes, demonstrating a 1T1C circuit by connecting an FTJ in the BEOL with an nMOS transistor in the front-end-of-line. Measurements on standalone FTJ devices in the BEOL reveal an ON/OFF ratio of 18 and an ON current density of 24.5 …

    fu-berlin Repository record for Development of ferroelectric tunnel junction devices based on hafnia zirconia films for neuromorphic applications (opens in a new tab)

  9. Resistive Switching Behavior in Low-K Dielectric Compatible with CMOS Back End Process

    … standard processes employed in back-end-of-line (BEOL) interconnect fabrication. Based on this premise, the study of this thesis aims at assessing a possible co-integration of resistive switching (RS) cells with current BEOL technology. In particular, the issue is whether RS can be realized with …

    vt Repository record for Resistive Switching Behavior in Low-K Dielectric Compatible with CMOS Back End Process (opens in a new tab)

  10. DESIGN, MODELING, OPTIMIZATION, AND BENCHMARKING OF INTERCONNECTS AND SCALING TECHNOLOGIES AND THEIR CIRCUIT AND SYSTEM LEVEL IMPACT

    … technologies at the device and back end of line (BEOL) level. This work includes high level modeling of different technologies and quantifying potential performance gains on a circuit and system level. From the device side, this research looks at the scaling challenges and the future scaling …

    gatech Repository record for DESIGN, MODELING, OPTIMIZATION, AND BENCHMARKING OF INTERCONNECTS AND SCALING TECHNOLOGIES AND THEIR CIRCUIT AND SYSTEM LEVEL IMPACT (opens in a new tab)

  11. Modeling and Simulation of Advanced Nano-Scale Very Large Scale Integration Circuits

    … extraction considering lithography effect, (3) BEOL(back end of line) impact on SRAM(static random access memory) performance and yield, and (4) new physical synthesis optimization flow is used to shed area and reduce the power consumption. Interconnect parasitic extraction plays an important …

    tamu Repository record for Modeling and Simulation of Advanced Nano-Scale Very Large Scale Integration Circuits (opens in a new tab)

  12. Device Layout Techniques for RF Performance Enhancement on SiGe HBTs for Future Generation BiCMOS Technology

    … show that adding more dummy metal layers to the BEOL increases collector current density (JC) and base current density (JB) at most by 25% and 15%, respectively. Similarly, additional dummy metal layers reduce current gain (β) and JB stress degradation by 30% and 100%, respectively. Sentaurus …

    gatech Repository record for Device Layout Techniques for RF Performance Enhancement on SiGe HBTs for Future Generation BiCMOS Technology (opens in a new tab)

  13. Ferroelectric and Monolithic 3D (M3D) Memory Technologies for High-Performance, Energy-Efficient Computing

    … in-memory computing. First, a back-end-of-line (BEOL)-compatible dual-gate (DG) W-doped In2O3 (IWO) field-effect transistor (FET) with high-performance, low-leakage and improved reliability is demonstrated, which is promising as access/read transistors for realizing M3D embedded-DRAM. The …

    gatech Repository record for Ferroelectric and Monolithic 3D (M3D) Memory Technologies for High-Performance, Energy-Efficient Computing (opens in a new tab)

  14. Modeling, Design and Demonstration of 1 µm Wide Low Resistance Panel Redistribution Layer Technology for High Performance Computing Applications

    … it is observed that only back-end-of-line (BEOL) RDL fabricated on silicon can provide the interconnections needed for a high-performance system. However, this technology has reached a fundamental limitation due to the high resistance and capacitance of BEOL RDL that limits the further …

    gatech Repository record for Modeling, Design and Demonstration of 1 µm Wide Low Resistance Panel Redistribution Layer Technology for High Performance Computing Applications (opens in a new tab)

  15. Optimization of Sputtered Hafnium Zirconium Oxide Ferroelectrics for Memory Applications

    … cost. Consequently, the back-end-of-line (BEOL) integration of FE HfO2 is technically preferred. However, this straightforward integration is accompanied by a trade-off, which is the limited thermal budget to prevent the detrimental impact on the components finished in FEOL processes. …

    qucosa-diss

  16. Semiconducting amorphous gallium oxide thin film transistors

    … transistors (TFTs) in the back-end-of-line (BEOL) of CMOS chips. BEOL high-voltage TFTs would enable direct integration with low-voltage front-end-of-line (FEOL) transistors, facilitating energy efficient and compact systems. Amorphous gallium oxide (a-GaOx) emerges as a promising channel …

    fu-berlin Repository record for Semiconducting amorphous gallium oxide thin film transistors (opens in a new tab)

  17. Effects of moisture on the breakdown strength and lifetime of low permittivity dielectric for nanometer scale interconnects

    … front-end-of-line (FEoL) and back-end-of-line (BEoL) of the device because simple dimensional scaling with standard materials has come with performance costs that negate dimensional scaling performance improvements. At the FEoL, high-[kappa]/metal gate processes are being developed to reduce …

    texas Repository record for Effects of moisture on the breakdown strength and lifetime of low permittivity dielectric for nanometer scale interconnects (opens in a new tab)

Page 1 of 6