Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 67 for “"BET method"”.
-
Structure-property relationships and stability studies of multi-promoted catalytic systems for nitrogen (NOx) and/or nitrous (N2O) oxides abatement
… techniques, such as N2 physisorption (BET method), X-ray diffraction (XRD), Temperature programmed methods (TPR/TPD), microscopy methods (HRTEM, STEM) and infrared spectroscopy (FTIR, DRIFTS) were employed to gain insight into the impact of structural/surface promoters on the …
-
Combustion of aerosolized spherical aluminum powders and flakes in air
… determined using the Brunauer-Emmett-Teller (BET) method and respective "BET diameters". It is observed that the rates of pressure rise and rates of flame propagation were higher for aluminum powders with BET diameters of about 2 to 5 um compared to aluminum flakes for which the BET diameters …
-
Adsorção de Pb(II) utilizando adsorvente composto por montmorilonita e dolomita
… of XRD, TG / DTA, FT-IR, and surface area by BET method. The results showed the adsorption efficiency of the contaminant by the composite material studied in synthetic solution. The study found that the adsorption follows the Langmuir model, and the kinetics of adsorption follows the model of …
-
The preparation and characterization of thermo-sensitive colored hydrogel film and surfactant-free porous polystyrene three-dimensional network.
… to prove the crosslinking mechanism, also the BET method was used to measure the adsorption and desorption of polystyrene network. The BET constant (C) is calculated (C=6.32). The chemically bonded polymer nanoparticle network might have potential applications as catalyst or used for …
-
Development of conjugated microporous polymers for energy storage applications
… and scanning electron microscopy (SEM) methods. The total surface area of the materials were determined by the Brunauer–Emmett–Teller (BET) method, and the pore size distributions (PSD) determined by nonlocal density functional theory (NLDFT) method. Hansen solubility parameters and the …
-
Reverse Water Gas Shift Reaction over High Surface Area γ-Al2O3 Supported Mo2C Nanoparticles Synthesized by Reverse Microemulsion Method
… were synthesized by the reverse microemulsion method and analyzed their performance as RWGS catalysts. The catalyst composition, morphology and crystalline structure were investigated by inductively coupled plasma – optical emission spectrometry (ICP-OES), Brunauer-Emmett-Teller (BET) method, …
-
Síntese e caracterização de carreadores de oxigênio para combustão com recirculação química obtidos via reação de combustão assistida por microondas
… (Me = Ca and Sr) were synthesized by the method via the combustion reaction assisted by microwave. were synthesized from the combustion reaction method by microwave process. This method control the synthesi`s conditions to obtain materials with specific characteristics. The carriers …
-
Síntese e impregnação de peneiras moleculares Fe MCM-41 derivada de sílica da casca do arroz
… silica source. Hydrothermal synthesis was the method chosen to prepare the materials. Pre-defined synthesis parameters were 100°C for 168 hours, later the precursor was calcinated at 550°C for 2 hours under nitrogen and air flow. The sieves containing different proportions of iron were produced …
-
Desenvolvimento de componentes nanométricos para aplicação em células a combustível à base de sólidos estruturados e filmes finos
… Ce0,8Sm0,2O1,9 were obtained by modified Pechini method by use of gelatin which act as polymerization agent. The powders obtained were characterized by Xray fluorescence, X ray diffraction, electronic scanning microscopy and the superficial area by BET method. The results obtained by X-ray …
-
Influência do uso de combustíveis alternativos na síntese por combustão via microondas para a produção de materiais cerâmicos com estrutura espinélio
… Diffraction (XRD), analysis by specific area by BET Method and Scanning Electron Microscopy (SEM). Quantification of phases and structural parameters were carried through Rietveld method. The methodology was effective to obtain Ni-Mn mixed oxides. The fuels influenced in obtaining spinel phase …
-
Síntese de zeólita A a partir de diatomita como fonte de aluminossilicato
… of zeolite, involving higher costs. The methodology for obtaining the "Zeolite A" using as a source of silica and alumina diatomite is simple, since this is a source of silicon, not requiring therefore a structural driver, but also by heat treatment, only drying conventional to remove …
-
Utilização da cinza da casca de arroz em cimentação de poços de petróleo
… silicate hydrate (C-S-H), which aggregate better physical, chemical and mechanical properties to the cement slurry. The usage of rice husk biomass ash from agribusiness in addition to or partially replacing cement is a noble purpose and a good way of sustainable development which currently …
-
Remoção de metais pesados em efluentes sintéticos utilizando vermiculita como adsorvente
… environment, becoming a serious problem. Many methods used for wastewater treatment have been reported in the literature, but many of them have high cost and low efficiency. The adsorption process has been used as effective for the metal remoal ions. This paper presents studies to evaluate the …
-
Caracterização microestrutural e elétrica de La(FexNi1-x)O3 sintetizado pelo método da gelatina
… materials were obtained by chemical synthesis method, using gelatin as the substituent of citric acid and ethylene glycol, and polymerizing acting as chelating agent. The materials were characterized by X-ray diffraction, thermal analysis, spectroscopy Fourier transform infrared, scanning …
-
Síntese e caracterização de catalisadores nanométricos de LaSrNiO4 para aplicação em dessulfurização de tiofeno
… x = 0,2 and 0,3), through the Pechini method and your characterization for subsequent application in the desulfurization of thiophene reaction. The precursor solutions were calcined at 300ºC/2h for pyrolysis of polyester and later calcinations occurred at temperatures of 500 - 1000°C. …
-
Carregadores de oxigênio a base de níquel suportado em materiais mesooros para aplicação na recirculação química com reforma (RQR)
… and La-SiO2 were synthesized by hydrothermal method. After the synthesis step they were calcined at 550°C for 2 hours and characterized by TG, XRD, surface area using the BET method and FTIR spectroscopy. The deposition of active phase, in this case Nickel, took place in the proportions of 5, …
-
Toxicity of manufactured particulate materials on plant root growth
… techniques of FTIR, SEM/EDS, the BET method, and particle size analysis, as well as liquid phase coating techniques were applied simultaneously to facilitate the study on toxicological mechanisms of these manufactured particles. The results indicate that phytotoxicity of particles …
-
The Potential for Activated Biochar to Remove Waterborne Viruses from Environmental Waters
… have led to not only the examination of current method limitations, but also to the investigation of new conversion methods. One promising method for bioenergy production is pyrolysis of lignocellulosic feedstocks. Through pyrolysis, a single crop may produce ethanol, bio-oil, and/or gaseous …
-
Eficiência da sílica bimodal como adsorvente do dióxido de carbono para o tratamento do gás natural
… was established from silica, by the hydrothermal method, and improved by the techniques of X-ray diffraction, lifting electron microscopy and specific surface area by the BET method. The adsorption capacity tests were performed for CO2, methane (CH4) and their mixtures, in a magnetic suspension …
-
Estudo da atividade fotocatalítica dos nanocompósitos TiO2- x%CeO2 e CeO2-x%TiO2 obtido pelo método hidrotérmico assistido por micro-ondas
… generation of polluting effluents, being their methods of treatment, the target of several studies to mitigate investigate the damage caused by such waste. A widely studied method is the Advanced Oxidation Process (AOP), which aims for the treatment of organic effluents. In this work, …
Page 1 of 4