Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 161 for “"Back Contact"”.
-
Molybdenum back contact treatment for Cu2ZnSnS4 solar cells
… for solar cell applications. Instability of Mo back contacts in CZTS solar cells is observed, as the reaction between the Mo back contact and the CZTS absorber is thermodynamically favourable. Intermediate layers of Ag and ZnO are deposited at the CZTS/Mo interface in order to address this …
-
High-efficiency back-contact back-junction silicon solar cells
In this thesis high-efficiency back-contact back-junction (BC-BJ) silicon solar cells for one-sun applications were studied. The focus was put on the development of a low-cost and industrially feasible manufacturing technology in order to utilize the full cost reduction potential of this elegant …
-
A low-cost laser grooved interdigitated back contact solar cell
Work into the interdigitated back contact (IBC) cell to date has shown that the geometry can produce amongst the highest efficiency silicon solar cells. These current devices have yet to become the market leading technology due to the costly and tricky fabrication processes required to keep the …
-
Characterization of tellurium back contact layer for CdTe thin film devices
… projected CdTe device efficiency, with the back contact being a main source of CdTe performance limitations. Tellurium (Te) applied as a back contact has led to significant increases in fill factor and an overall progress in device efficiency. Devices deposited with Te show significant …
-
Molybdenum As a Back Contact for CuCl Treated CdS/CdTe Solar Cells
… high efficiencies is to have a good ohmic contact on the CdTe, which is characterized by a very high work function [2]. Cu is used as a dopant in CdTe at the contact to promote quantum mechanical tunneling [3]. But the oversupply of Cu causes the diffusion of Cu through CdTe to the …
-
Impurity and Back Contact Effects on CdTe/CdS Thin Film Solar Cells
… Phosphorus and Antimony, finding and testing new back contact materials, and varying the ambient of CSS CdTe. In addition, the effect of Zn2SnO4 on the cells' performance was also studied. Electrical characterization of the thin films and completed devices were carried out by Current-Voltage …
-
Study of back contact formation on CdTe/CdS thin film solar cells
Includes bibliographical references.
-
Design, fabrication and testing of silicon interdigitated back contact (IBC) solar cells
Describes the work done in implementing a process sequence for IBC solar cell fabrication at Concordia's Microelectronics Laboratory.
-
Diffusion Modeling of Impurities Through the Molybdenum Back Contact of CIGS Solar Cells
CIGS is a major technology in photovoltaics and depends heavily, as any other PV technology, on the capacity to achieve the highest efficiency possible to compete on the market. Alkaline elements, notably sodium and potassium, play a key role in this matter as they enhance the open circuit voltage …
-
Efforts to Improve Back Contact of CdTe Thin Film Solar Cells with Advanced Characterization
… the CdTe solar cell. The achievement of an ohmic back contact has been critical in CdTe-based solar cells. Flattening the back-surface roughness of the CdTe absorber of polycrystalline CdTe thin film solar cells is important to passivate the back surface with large, uniform grains and for ease of …
-
Molybdenum Nitride Films in the Back Contact Structure of Flexible Substrate CdTe Solar Cells
… of substrate CdTe solar cells is the poor back contact. In this work, CdTe solar cells of the substrate configuration have been fabricated on flexible metallic substrates. For this type of devices, impurity diffusion out of stainless-steel substrates due to high temperature processing can …
-
Study of Modified Deposition Process for Cu(In,Ga)Se2 Solar Cell Back Contact
… is the most appropriate material used as the back contact for CIGS solar cells, and is commonly deposited by sputtering onto soda lime glass (SLG). Mo thin films act as the metal contact. The formation of an Ohmic contact at the Mo/CIGS interface is one of the most important properties apart …
-
Impact of back-contact materials on performance and stability of CdS/CdTe solar cells
… of a stable, low resistance, non-rectifying contact to p-CdTe thin-film is one of the major and critical challenges associated with this technology in the fabrication of efficient and stable solar cells. The premise of this thesis is a systematic study of the impact of back-contact materials …
-
Performance and metastability of CdTe solar cells with a Te back-contact buffer layer
… for potential performance enhancement is the back contact of the CdTe device. This research incorporated a thin-film Te-buffer layer into the contact structure, between the CdTe and contact metal. The device performance and characteristics of many different back contact configurations were …
-
Back-contact layers on CdTe solar cells and loss analysis of top-performing devices
… (compared to the limit of 33%), has held CdTe back from expanding its market share. For comparison, silicon photovoltaics has reached an efficiency of 26.6% and has ~95% of the solar energy market share. The limited efficiency for CdTe is attributed in large part to the voltage deficit, which …
-
Stability Studies of CdTe Solar Cells Fabricated With Varying Amounts of Cu in the Back Contact
… in CdTe solar cells can be attributed to the back contact, which often contains Cu to improve the electronic properties of CdTe (absorber layer) and to enable a quasi ohmic back contact. The main objective of this thesis was to study effect of amount of Cu in the back contact and contact …
-
Correlation Between Preparation Parameters And Properties Of Molybdenum Back Contact Layer For Cigs Thin Film Solar Cells
Molybdenum (Mo) thin film back contact layers for thin film CuIn(1-x)GaxSe2 (CIGS) solar cells were deposited onto soda lime glass substrates using a direct current (DC) planar magnetron sputtering deposition technique. Requirements for the Mo thin film as a back contact layer for CIGS solar cells …
-
Improvements in thin film CdTe back contact and interface layers through sputter deposition of metals and semiconductor materials
… performance. The focus of this study is on back contact interface layers. This research explores sputtered molybdenum oxide (MoOₓ) and molybdenum nitride (MoNₓ) thin films as alternative back contact to carbon and nickel paint in a polymer binder. The MoOₓ and MoNₓ films were characterized …
Page 1 of 9