Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 329 for “"Back to back"”.

  1. Co-Simulation of Back-to-Back VSC Transmission System

    … it may be required more than one platform to do an intended study efficiently and accurately. This research was carried out to investigate the use of co-simulation in an application of power system. A back-to-back Voltage Source Converter (VSC) transmission system was modeled in PSCAD/EMTDC …

    manitoba Repository record for Co-Simulation of Back-to-Back VSC Transmission System (opens in a new tab)

  2. Měnič typu back-to-back pro motory a generátory

    Cílem této práce byl návrh a realizace měniče typu back-to-back. Jedná se o nepřímý měnič frekvence se stejnosměrným meziobvodem a aktivním usměrňovačem. Nejprve je popsán postup při návrhu jednotlivých komponent s výpočtem jejich provozních parametrů. Dále je popsáno propojení částí a sestavení …

    brno-tech Repository record for Měnič typu back-to-back pro motory a generátory (opens in a new tab)

  3. Damping subsynchronous resonance oscillations using a VSC HVDC back-to-back system

    … the power industry is the mitigation of severe torsional oscillations induced in turbine-generator shaft systems due to Subsynchronous Resonance (SSR). SSR occurs when a natural frequency of a series compensated transmission system coincides with the complement of one of the torsional modes of …

    sask Repository record for Damping subsynchronous resonance oscillations using a VSC HVDC back-to-back system (opens in a new tab)

  4. Power router based on a fractionally-rated back-to-back (FR-BTB) converter

    … system based on the fail-normal switch to avoid single point-of-failure is presented. The operation of proposed protection system in isolating the converter and the grid in the event of faults is verified through simulation. An analytical method to evaluate the stability of a system with …

    gatech Repository record for Power router based on a fractionally-rated back-to-back (FR-BTB) converter (opens in a new tab)

  5. Experimental study and analysis of performance of back-to-back MSE walls under static loading

    Back-to-back mechanically stabilized earth (BBMSE) walls, which consist of twoopposing MSE wall systems sharing a common reinforced or retained fill zone, have been increasingly used for highway embankments, bridge abutments, and railway infrastructure. The FHWA provides design guidance on BBMSE …

    ku Repository record for Experimental study and analysis of performance of back-to-back MSE walls under static loading (opens in a new tab)

  6. Back to Back Active Power Filter for Multi-Generator Power Architecture with Reduced dc-link Capacitor

    … a multi-megawatt scale power generating system to comply with harmonic regulations. Among all types of multi-pulse converters, a 12-pulse converter is the most widely used due to the simple structure, which consists of a delta-delta and a delta-wye phase-shift transformer pair and it effectively …

    vt Repository record for Back to Back Active Power Filter for Multi-Generator Power Architecture with Reduced dc-link Capacitor (opens in a new tab)

  7. A soft-switch back-to-back bi-directional DC-DC converter and the FPGA based digital control design

    In this thesis, a soft switching back-to-back bi-directional DC-DC converter is proposed, and an FPGA based digital control design for it is developed.The bi-directional DC-DC converter is able to handle the power flow in both directions, either from the high voltage side to the low voltage side …

    nus Repository record for A soft-switch back-to-back bi-directional DC-DC converter and the FPGA based digital control design (opens in a new tab) Download file for A soft-switch back-to-back bi-directional DC-DC converter and the FPGA based digital control design (opens in a new tab)

  8. Design and Comparison of passive component requirements of a matrix converter and voltage-source based back-to-back converter

    A filter is required to eliminate the high frequency switching ripple present in the input current of AC/AC pulse-width modulated (PWM) converters. Design of such filters requires an estimation of the higher harmonic components present in various voltages and currents. Due to pulse-width modulation …

    umn Repository record for Design and Comparison of passive component requirements of a matrix converter and voltage-source based back-to-back converter (opens in a new tab)

  9. Mass Transfer in Back to Back Elbows arranged in an Out of Plane Configuration under Single & Annular Two-Phase Flow Conditions

    … plants. Mass transfer is the rate limiting factor, even though chemistry and materials determine the overall potential for FAC. Different localized thinning rates in back to back elbow configurations between the first and second elbow have been noted at nuclear power plants, and this difference …

    mcmaster Repository record for Mass Transfer in Back to Back Elbows arranged in an Out of Plane Configuration under Single & Annular Two-Phase Flow Conditions (opens in a new tab)

  10. Modeling, analysis, design and control of a power electronic transformer using back-to-back connected MMCs for grid integration of renewables and storage

    … integration should provide ancillary services to keep the grid stable. In addition, it has become the norm to be able to integrate multiple heterogeneous forms of energy through a common interface scheme and thus achieve higher power densities. The power electronic interface in this research …

    umn Repository record for Modeling, analysis, design and control of a power electronic transformer using back-to-back connected MMCs for grid integration of renewables and storage (opens in a new tab)

  11. Polarization-Insensitive Techniques for Optical Signal Processing

    … are studied: clock recovery based on two-photon absorption in silicon and demultiplexing based on cross-phase modulation in highly nonlinear fiber. The clock recovery system is tested at an 80 Gb/s data rate for both back-to-back and transmission experiments. The demultiplexer is tested at a …

    maryland Repository record for Polarization-Insensitive Techniques for Optical Signal Processing (opens in a new tab)

  12. Implementation of Wind Energy Systems to the Existing Power Grid

    … analysis of a Doubly Fed Induction Generator(DFIG) belonging to a Wind Power Generator is performed. Firstly, the steady state model of the DFIG is derived, and based on the DFIG characteristics, its steady state operating condition is determined. Also, the control strategies that …

    houston Repository record for Implementation of Wind Energy Systems to the Existing Power Grid (opens in a new tab)

  13. Disentangling Bird Activity and Observer Processes in Avian Point Count Surveys for Occupancy Modeling

    … declining wildlife populations, a valuable way to efficiently sample wildlife and increase conservation interest is to engage the public in science. Occupancy studies that use simple detection/non-detection data to estimate where species occur and why present a low-barrier option for public …

    alabama Repository record for Disentangling Bird Activity and Observer Processes in Avian Point Count Surveys for Occupancy Modeling (opens in a new tab)

  14. Control of a fractional-slot, concentrated-wound interior permanent magnet generator for direct-drive wind generation applications

    This thesis assesses improvements to two types of control for a novel interior permanent magnet (PM) synchronous generator with fractional-slot, concentrated-wound stator designed for direct-drive wind energy conversion. The two control techniques assessed are a) field oriented control using a …

    unsw Repository record for Control of a fractional-slot, concentrated-wound interior permanent magnet generator for direct-drive wind generation applications (opens in a new tab)

  15. Modelling and Simulation of DFIG for wind energy applications using PWM converters

    … work focuses on Double Fed Induction Generator Modelling and Simulation in wind energy conversion system applications. DFIG is one of the most common machines in modern wind power generation because of its capability to operate efficiently for a wide range of wind speeds. The design of the …

    washington Repository record for Modelling and Simulation of DFIG for wind energy applications using PWM converters (opens in a new tab)

  16. Estratégia de conversor para interligação de sistemas de geração eólica à rede elétrica

    Currently, there are several power converter topologies applied to wind power generation. The converters allow the use of wind turbines operating at variable speed, enabling better use of wind forces. The high performance of the converters is being increasingly demanded, mainly because of the …

    brazil-ufrn Repository record for Estratégia de conversor para interligação de sistemas de geração eólica à rede elétrica (opens in a new tab)

  17. Antenna design and channel modelling for in-band full-duplex radios

    … full-duplex (IBFD) radios have the potential to double the throughput by improving the spectral efficiency. The main bottleneck in its implementation is the self-interference (SI) at the receiving side of the transceiver due to its own transmission. The main focus of this thesis is 1) to …

    aalto Repository record for Antenna design and channel modelling for in-band full-duplex radios (opens in a new tab)

Page 1 of 17