Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 43 for “"Back-surface field"”.

  1. Laser-doped selective emitter and local back surface field solar cells with rear passivation

    … of different SiNx films on different silicon surfaces. Significant bulk lifetime enhancement is seen when SiNx-passivated CZ wafers are annealed. Using an optimal annealing condition, the implied Voc of CZ silicon substrates increased to a value comparable to that of FZ wafers - almost 720 mV. …

    unsw Repository record for Laser-doped selective emitter and local back surface field solar cells with rear passivation (opens in a new tab)

  2. PULSED LASER PROCESSING FOR HIGH EFFICIENCY SILICON WAFER SOLAR CELLS

    … lasers in the fabrication of aluminium local back surface field (Al-LBSF) solar cells. The work predominantly focuses on laser induced damage to the silicon and post-laser methods that mitigate the impact of laser induced defects on the final solar cell performance. Finally optimised laser …

    nus Repository record for PULSED LASER PROCESSING FOR HIGH EFFICIENCY SILICON WAFER SOLAR CELLS (opens in a new tab) Download file for PULSED LASER PROCESSING FOR HIGH EFFICIENCY SILICON WAFER SOLAR CELLS (opens in a new tab)

  3. Advanced metallization for screen-printed solar cells

    … recombination at front contact regions and rear surface; and 3) parasitic light absorption at the rear surface. This thesis investigates methods to improve front and rear metallization to overcome these limitations and increase the cell efficiency. On the front side, the development of a novel …

    unsw Repository record for Advanced metallization for screen-printed solar cells (opens in a new tab)

  4. Development of high-efficiency solar cells on thin silicon through design optimization and defect passivation

    … silicon wafers with full area aluminum-back surface field. In spite of loss in efficiency, wafer thinning reduced the module cost. Device modeling was performed to establish a roadmap towards high-efficiency thin cells and back surface recombination velocity and back surface reflectance …

    gatech Repository record for Development of high-efficiency solar cells on thin silicon through design optimization and defect passivation (opens in a new tab)

  5. Měření vázaného náboje pomocí povrchového napětí

    … náboje v pasivační vrstvě se projevuje tzv. Back Surface Field (BSF) efektem, který přispívá ke snižování povrchové rekombinační rychlosti na zadní straně solárního článku. V práci jsou popsána experimentální měření dielektrických vrstev Al2O3, AlN, SiNx, Y2O3 a PSG deponovaných na …

    brno-tech Repository record for Měření vázaného náboje pomocí povrchového napětí (opens in a new tab)

  6. Metal-insulator-semiconductor tunnel junctions and their application to photovoltaic energy conversion

    … basic classes: those in which the semiconductor surface is depleted or strongly inverted at equilibrium, and those in which the surface is accumulated at equilibrium. Junctions falling in the former category are termed positive barriers, while those in the latter group are termed negative …

    ubc Repository record for Metal-insulator-semiconductor tunnel junctions and their application to photovoltaic energy conversion (opens in a new tab) Download PDF for Metal-insulator-semiconductor tunnel junctions and their application to photovoltaic energy conversion (opens in a new tab)

  7. Aspects of Silicon Solar Cells: Thin-Film Cells and LPCVD Silicon Nitride

    … and shown to produce a 35um thick layer with a back surface field approximately 3.5um thick.¶ ...

    anu Repository record for Aspects of Silicon Solar Cells: Thin-Film Cells and LPCVD Silicon Nitride (opens in a new tab)

  8. Direct writing for silicon wafer solar cells

    … the rear dielectric films of aluminium local back surface field (Al-LBSF) solar cells. A new method is presented to geometrically confine directly deposited features on hydrophilic rough surfaces. The direct patterning technique is applied to the fabrication of Al-LBSF solar cells, resulting …

    nus Repository record for Direct writing for silicon wafer solar cells (opens in a new tab) Download file for Direct writing for silicon wafer solar cells (opens in a new tab)

  9. Untersuchungen zur Degradation der Metallisierung von PERC-Solarzellen

    … für die bislang dominierende BSF-Technologie (back surface field) hat eine umfangreiche Änderung der Metallisierung der Solarzellen nach sich gezogen, wodurch neue Degradationseffekte auftreten können. In der vorliegenden Arbeit werden die einzelnen Komponenten der Solarzellenmetallisierung und …

    qucosa-diss

  10. Rear Local Contact Formation for High-efficiency Crystalline Silicon Wafer Solar Cells

    … are increasingly used at the rear to minimize surface recombination losses. In this thesis the local contact formation for p-type Al-LBSF (Aluminium Local Back Surface Field) solar cells and n-type PERT (Passivated Emitter Rear Total diffused) solar cells is investigated in detail. For p-type …

    nus Repository record for Rear Local Contact Formation for High-efficiency Crystalline Silicon Wafer Solar Cells (opens in a new tab) Download file for Rear Local Contact Formation for High-efficiency Crystalline Silicon Wafer Solar Cells (opens in a new tab)

  11. ULTRA-SHORT PULSE LASER ABLATION FOR HIGH-EFFICIENCY SILICON WAFER SOLAR CELLS

    … models for laser groove dimensions. Etch-back experiments showed that the gentle regime needed < 5 s of damage etching, making this process suitable for high-efficiency solar cell architectures, whereas the strong regime induced severe bulk damage. The fs laser process was then applied to …

    nus Repository record for ULTRA-SHORT PULSE LASER ABLATION FOR HIGH-EFFICIENCY SILICON WAFER SOLAR CELLS (opens in a new tab) Download file for ULTRA-SHORT PULSE LASER ABLATION FOR HIGH-EFFICIENCY SILICON WAFER SOLAR CELLS (opens in a new tab)

  12. Understanding and development of dielectric passivated high efficiency silicon solar cells using spin-on solutions

    … the efficiency of conventional full aluminum back surface field solar cells to 19.6 %. A streamlined process was then developed to fabricate high-efficiency dielectric rear passivated cells in a single high temperature step. This process combined the diffusion process described earlier with a …

    gatech Repository record for Understanding and development of dielectric passivated high efficiency silicon solar cells using spin-on solutions (opens in a new tab)

  13. Development of low-cost and high-efficiency commercial size n-type silicon solar cells

    … emitter without boron-rich layer and phosphorus back surface field, silicon dioxide/silicon nitride stack for surface passivation, optimized front grid pattern with screen printed 5 busbars and 100 gridlines, and improved rear contact with laser opening and physical vapor deposition aluminum. …

    gatech Repository record for Development of low-cost and high-efficiency commercial size n-type silicon solar cells (opens in a new tab)

  14. Polikristalinio silicio saulės elementų kontaktų optimizavimas /

    … properties; to investigate and compare the back side aliuminium paste with reference paste; to investigate how the back surface force (BSF) influences the electrical parameters of the SE. Methods. All experiments were carried out in a commercial plant conditions. In experiments metallization …

    vilnius Repository record for Polikristalinio silicio saulės elementų kontaktų optimizavimas / (opens in a new tab)

  15. SURFACE ETCHING TECHNOLOGIES FOR MONOCRYSTALLINE SILICON WAFER SOLAR CELLS

    … silicon wafers. The engineering of the wafer surfaces is critical to the solar cell cost reduction and performance enhance¬ment. Therefore, this thesis focuses on the development of surface etching techno¬logies for monocrystalline silicon wafer solar cells. It aims to develop a more efficient …

    nus Repository record for SURFACE ETCHING TECHNOLOGIES FOR MONOCRYSTALLINE SILICON WAFER SOLAR CELLS (opens in a new tab) Download file for SURFACE ETCHING TECHNOLOGIES FOR MONOCRYSTALLINE SILICON WAFER SOLAR CELLS (opens in a new tab)

  16. Heterojunction A1GaAs-GaAs solar cells for space applications

    … structure with GaAs/AlGaAs heterojunction back surface field (triple heterojunction(TIIJ))-to enhance the performance of the existed double heterojunction solar cell- is proposed. The analytical model for this TIU cell is presented as a function of all the cell's design parameters ( such as …

    cent-lancashire Download PDF for Heterojunction A1GaAs-GaAs solar cells for space applications (opens in a new tab)

  17. Process Development for Single-Crystal Silicon Solar Cells

    … and low cost, thereby reducing the energy pay-back time. An example would be the use of metal pastes which dissolve the dielectric during the firing process as opposed to lithographically defined contacts. With current trends of single-crystal silicon photovoltaic (PV) module prices down to …

    rit Repository record for Process Development for Single-Crystal Silicon Solar Cells (opens in a new tab)

  18. Ultra-thin Single-crystalline Silicon Membrane Solar Cells as a Light-trapping Test Platform

    … The best fabricated device incorporated a back surface field, a white paint diffuse rear reflector and a silicon nitride antireflection coating. It achieved a fill factor, efficiency, short circuit current and open circuit voltage of 0.67, 9.9%, 27.9 mA cm<sup>-2</sup> and 0.53 V …

    mcmaster Repository record for Ultra-thin Single-crystalline Silicon Membrane Solar Cells as a Light-trapping Test Platform (opens in a new tab)

  19. Development of n-type polycrystalline silicon thin film solar cells on glass

    … such as absorber doping control via diffused back surface field, influence of emitter doping and thickness on cell performance, influence of absorber doping on cell performance, the effect of RTA temperature on cell performance, the effect of hydrogen passivation temperature on cell …

    unsw Repository record for Development of n-type polycrystalline silicon thin film solar cells on glass (opens in a new tab)

  20. Point-contacting by Localised Dielectric Breakdown: self-aligned metallisation for a solar cell rear surface

    … in recent years by developments in the front surface design. This has been largely driven by new screen printed pastes and selective emitter technologies which have facilitated the use of high efficiency emitters. The rear surface offers next best way to increase cell efficiency by improving …

    unsw Repository record for Point-contacting by Localised Dielectric Breakdown: self-aligned metallisation for a solar cell rear surface (opens in a new tab)

Page 1 of 3