Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 140 for “"Backpressure"”.
-
Backpressure networks with cooperative link augmentation
Made available in DSpace on 2017-03-01T16:37:08Z (GMT). No. of bitstreams: 2 LEE-THESIS-2016.pdf: 886931 bytes, checksum: 861a01b978b7a8909d863c93388cc960 (MD5) LICENSE.txt: 4208 bytes, checksum: 751f13872c59aa3d2ae5fe4a3cade338 (MD5) Previous issue date: 2016-12-07
-
Backpressure Policies for Wireless ad hoc Networks
… and low end-user delay. In the literature, the backpressure policy, i.e. queue backlog differential-based joint routing and scheduling, is known to be throughput-optimal with robust support for traffic load fluctuations \cite{Tssailus92}. Unfortunately, many backpressure-based algorithms cannot …
-
Congestion Mitigation in Wireless Sensor Networks Using Single-Hop Backpressure Algorithm
… in wireless sensor networks. The Single-hop Backpressure algorithm proposed in this thesis to control the congestion is completely dependent on the transport layer and network layer of the protocol stack. This greatly reduces packet losses in a network under varied traffic loads, thereby …
-
Error analysis and design considerations for backpressure testing of gas wells
Includes bibliographical references.
-
Evaluation of 1D and 3D CFD Simulation Methods for Exhaust Backpressure
An internal combustion engine generates exhaust gases that need to be transported away from the engine and also the passenger cabin. This is achieved by using an exhaust system that directs the flow of gases. Apart from directing the flow of gases, the exhaust system also has the function of …
-
PMP-NC² - a normally-closed, backpressure independentperistaltic micropump featuring a modular setup
… to enable precise pumping operations even if the backpressure varies. The stroke volume of one peristaltic movement is 0.64 μL with a maximum deflection of the peristaltic stack actuators of 40 μm. Up to a frequency of 5 Hz the flow rate is linearly dependent (R²=0.99) on the pump frequency and …
-
The effect of condenser backpressure on station thermal efficiency : Grootvlei Power Station as a case study
Grootvlei Power Station's thermal efficiency had been on a steady declining trend since it was re-commissioned in 2008, which had tremendous financial implications to the company at the time of writing. The main contributory factor to the thermal efficiency losses was identified to be the condenser …
-
Hydraulic and chemical properties of geosynthetic clay liners in mining applications
… pH solutions often encountered, and the use of backpressure is recommended requiring testing at elevated pressures. To overcome these limitations, an alternative gravity method without backpressure, paired with a permeameter constructed from non-reactive materials and intended to minimize …
-
Development of an Accelerated Ash Loading Protocol for Rapid Evaluation of Diesel Particulate Filters Including Comprehensive Characterization of Ash-loaded Substrates
… chamber.</p> <p>The ash loading protocol is a backpressure-based method of determining the amount of soot present within the DPF and initiating active regeneration upon achieving the target soot loading of 3 grams per liter. The final protocol employed a backpressure threshold that is defined …
-
A comparison of low-gravity and one-gravity cryogenic flow boiling
… is used when describing the speculation that a backpressure in the test tube may influence the quench temperature and quench speed. Recommendations are made for future experiments to further understand how the backpressure may influence the quench temperature and quench speed.</p>
-
Design, Modelling and Experiments of a Multi-Lobe, Swirl Bend Mixing Nozzle for a Turbo-Fan Engine
… IR signature of a turbofan engine and measuring backpressure data. IR signature reduction was be done by (1) blocking the line of sight to the turbine; and, (2) reducing the plume temperature of the exhaust jets. The nozzle design methodology describes nozzle construction parameters and how …
-
Novel two-stage peristaltic micropump optimized for automated drug delivery and integration into polymer microfluidic systems
… two-stage peristaltic micropump. It features a backpressure independent volumetric dosing capability, such that a stable flow rate is ensured up to a backpressure of 30 kPa. This highly valuable feature is based on a new serial arrangement of two active valves and relies on both an appropriate …
-
COOPERATIVE NETWORKING AND RELATED ISSUES: STABILITY, ENERGY HARVESTING, AND NEIGHBOR DISCOVERY
… based on the channel state feedback. The backpressure policy for cross-layer control of wireless multi-hop networks is known to be throughput-optimal for i.i.d. arrivals. The third part of this dissertation is about the backpressure-based control for networks with time-correlated arrivals …
-
Fabrication and characterization of a polydimethylsiloxane microfluidic pump for direct-sampling neuroscience experiments, with in-line capillary electrophoresis - laser-induced fluorescence chemical analysis
… design and performance; and, flow rate, backpressure, and peristaltic signal analysis. A P-Q (or H-Q) plot was formed, to represent the performance of the micropump for maximum attainable backpressure (P), versus flow rate (Q). The linear plot was formed by experimentally collecting …
-
Integrating wireless technologies into intra-vehicular communication
… an intra-car wireless network based on the Backpressure Collection Protocol (BCP), which is theoretically proven to be throughput-optimal. We uncover a surprising behavior in which, under certain dynamic channel conditions, the average packet delay of BCP decreases with the traffic load. We …
-
CFD modeling of entrance and exit geometries of a wind speed accelerator.
… along the circumference, so as to alleviate backpressure. Both inlet and outlet sections utilize funnel shapes with both parabolic and hyperbolic regions. All geometry and mesh models were created using ICEM 12.1. Simulations were performed using Fluent 12.1.2. Turbulence was modeled using …
-
Development of a 3-cylinder Gasoline Engine Concept
… The smaller turbine showed high levels of backpressure, and therefore an alternative with limited backpressure was presented. The turbine with limited backpressure resulted in 1.6% lower peak power compared to the benchmark 4-cylinder engine and the 50mm turbine was able to produce 3.1% …
-
Preparation, characterisation and modification of porous carbon monolithic materials for chromatographic and electrochemical applications
… as SEM/EDX, BET, dilatometry, conductivity & backpressure determination and investigated for chromatographic application. Surface modification of the resultant carbon monoliths with gold nano-particles and nano-layers was carried out for further modification with thiol based affinity and …
-
Experimental investigation of the non-uniformity of jets’ velocities exiting a multi-hole injector
… also that along with injection pressure, backpressure plays a non-negligible impact on the time history of needle displacement over the injection process. More specifically, it emerged that, at unvaried injection pressure, higher backpressures boost needle lift as well as injector closure. …
-
Fast, Distributed Optimization Strategies for Resource Allocation in Networks
… to the queue stability problem studied in the backpressure literature. Accelerated Backpressure (ABP) is developed to solve the queue stabilization problem. A queue reduction method is introduced by merging ideas from integral control and momentum based optimization.
Page 1 of 7