Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 54 for “"Backrest"”.
-
The Effect of Office Chair Backrest Design on the Body's Metabolic Response to Office Work
Most office chairs have a backrest that is wider at the shoulders than at the hips. Recently, a new office chair was developed that has a backrest that is narrower at the shoulders and wider at the hips (upwardly tapered backrest). The upwardly tapered backrest should allow users to increase their …
-
NON-LINEAR FINITE ELEMENT ANALYSIS AND OPTIMIZATION FOR LIGHT WEIGHT DESIGN OF AN AUTOMOTIVE SEAT BACKREST
… of a commercially available automotive seat backrest frame manufactured from several stamped and welded low carbon ductile steel sheets is performed using OptiStruct linear optimization package from Altair under the loading requirements of mandatory ECE R-17 backrest-moment test and headrest …
-
SIMULATION OF A BACKREST MOMENT TEST FOR AN AUTOMOTIVE FRONT SEAT USING NONLINEAR CONTACT FINITE ELEMENT ANALYSIS
… including the base frame, slider rails and backrest. The stamped sheet metal structural frames are represented in the finite element using shell elements. Contact within the seat structure is defined in order to simulate joints between side flanges and cross tube members of the base frame. …
-
TOPOLOGY AND FREE-SIZE OPTIMIZATION WITH MULTIPLE LOADING CONDITIONS FOR LIGHT WEIGHT DESIGN OF DIE CAST AUTOMOTIVE BACKREST FRAME
… a lightweight die cast automotive front seat backrest frame when subjected to loads prescribed by ECE R17 European government regulations and additional loads which are predicted in an event of crash. In particular, an effort is made here to study the characteristics of a die cast automotive …
-
Predicting ride comfort with reclined seats
… of the literature revealed little study of how backrest inclination influences the discomfort caused by vibration of a seat or a backrest. This thesis seeks to advance understanding of the influence of backrest inclination on vibration discomfort and provides a model for evaluating vibration …
-
Monitoring the use of chair backrest and forearm support during computer work with and without a workplace Butterfly board attachment
… new method is proposed for monitoring the use of backrest and forearm support during computer work on a standard workstation and the same workstation with a Butterfly board attachment. The developed techniques measure the effect of using the Butterfly board on the resting duration and the pressure …
-
Transmission of vibration through backrests and apparent mass of the back during whole-body fore-and-aft vibration
… extend understanding of the transmissibility of backrests and the apparent mass of the back during whole-body fore-and-aft excitation.</p> <p>A series of experiments has measured the transmissibility of backrests and the apparent mass of the back of seated persons exposed to whole-body …
-
A study of the suspension-seat-occupant system dynamics under tri-axial translational vibration
… the effect of the excitation magnitude and the backrest inclination angle on the biodynamic response of the seated human body and the transmissibility of the suspension seat with tri-axial translational excitation. An experimental study was carried out with single-axial excitations at various …
-
Factors affecting the dynamic response of the body and the vibration transmitted through seats
… environment (e.g. vibration input spectra, backrest,<br/>hands position, foot position) and variability between people (i.e. physical characteristics), but<br/>these effects have not previously been systematically explored for realistic seating conditions.<br/>The apparent masses of 12 …
-
Effects of sitting posture and seat backrest on the biodynamic response of the human body and the prediction of spinal forces during vertical whole-body vibration
… vibration but the effects of sitting posture and backrest conditions on these forces are unclear. The main objectives of the research reported in thesis were to advance understanding of: (i) how sitting posture and contact with a backrest affect the biodynamic responses of the human body, and (ii) …
-
Cross-axis movements of the seated human body in response to whole-body vertical and fore-and-aft vibration
… apparent mass were measured on the seat and backrest. The vertical apparent mass at the feet was also measured. The vertical apparent mass on the seat showed a resonance in the vicinity of 5 Hz. The fore-and-aft croft axis apparent masses on the seat and at the backrest were as high as 60% of …
-
Neuromotor transmissibility of horizontal seatpan vibration
… objective was to examine the effect of a backrest on these characteristics. Nineteen subjects participated in the study (10 male, 9 female, mean age 24 ± 3 (SD) years, height 1.6 ± .05 m (SD), weight 69 ± 7 kg (SD)). The transmission of vibration to vibration-induced lumbar rotation (TF2) …
-
Neuromotor Transmissibility of Horizontal Seatpan Vibration
… objective was to examine the effect of a backrest on these characteristics. Nineteen subjects participated in the study (10 male, 9 female, mean age 24 3(SD) years, height 1.6 . 05 m (SD), weight 69 7 kg (SD)). The transmission of vibration to vibration-induced lumbar rotation (TF2) and …
-
Design and Development of an Ergonomic Hybrid Forklift Seat
… has been found to be very effective. The backrest in a forklift, for example, is provided for comfortable driving in the form of leaning/sitting postures. An ergonomic backrest has to consider the anthropometric variation in the human population to ensure optimum levels of comfort for …
-
Biodynamic response and body interactions with the seat pan and the back rest under vertical vibration
… significant simultaneous interactions with the backrest. In this dissertation research, the body interactions with both the seat pan and the backrest are investigated under vertical automotive vibration and representative posture. An experiment design is realized on the basis of typical …
-
Biomechanical comparison of a rigid and dynamic seating system for children with special needs
… converted into force and moments acting on the backrest and footrests in three dimensions, assuming static equilibrium. The position of the resultant force on the backrest, termed the centre of pressure (COP), was also calculated. This project shows that the development of a fully mobile data …
-
Discomfort of seated persons exposed to low frequency lateral and roll motion
… Hz caused less discomfort when sitting with a backrest than when sitting without a backrest on both a rigid seat and on a cushioned train seat; contrary to the predictions of current standards. In the third experiment, 0.25 to 0.4 Hz lateral acceleration in the plane of the seat caused similar …
-
The discomfort from exposure to low frequency rotational and translational vibration
… in the plane of the seat; • the presence of a backrest would exacerbate discomfort during both rotational and translational oscillation; • the adoption of different postures during vibration would affect the reported discomfort. Achieving these objectives required determination of the …
-
Measurement and modelling of seating dynamics to predict seat transmissibility
… the foam thickness at the seat cushion and the backrest on the transmissibility was investigated experimentally in the laboratory with a SAE J826 manikin and with 12 subjects during exposure to 60-s periods of fore-and-aft and vertical vibration, respectively, in the frequency range 0.5 to 20 Hz …
-
An Ergonomic Evaluation of a Front Support Chair for Forward Leaning Seated Tasks
… Chairs that are usually provided have backrests with lumbar support; however, leaning forward makes the utilization of the backrests insufficient or non-existent. This study explores and examines if a "front-rest" (as opposed to a backrest) provides better support for the employees …
Page 1 of 3