Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 144 for “"Bainitic"”.
-
Bainitic Kinetics
… employed to calculated the growth rates of upper bainitic rods in the Fe-C-Nisystem at 400° C. A "phase diagram" was constructed in order to supply the effective supersaturations required by the local equilibrium model$ Lengthening rates were also calculated using a paraequilibrtum Interface …
-
Machinability of bainitic steels
… manufacturing energy has ignited an interest in bainitic steels. These steels can attain their required properties through controlled cooling and thereby avoid energy intensive heat treatments. However, their machining behaviour remains less understood than their mechanical performance. This work …
-
Machinability of bainitic steels
… enable more efficient and lightweight designs. Bainitic steels are a class of materials that could meet these requirements. They offer superior mechanical properties compared to traditionally used steels with a pearlitic-ferritic microstructure, allowing for the design and production of smaller …
-
Phase Field Modelling of Bainitic Transformation
… process and carbide formation during the bainitic type transformation. The thermodynamic data for the chemical free energy were obtained using the Thermo-Calc software. Also, the transformation strains reproducing the γ → α transformation with three transformation variants of ferrite were …
-
Electrochemical corrosion behaviour of nanostructured bainitic steel
Nanostructured bainitic steels are gaining high interest due to their excellent mechanical properties. However, high carbon content in nanostructured bainitic steels can influence their general and localized corrosion susceptibility. In this study, the corrosion behaviour of nanostructured bainitic …
-
Hydrogen Embrittlement of Nanostructred Bainitic High Strength Steel
Characterization of nanostructured bainitic high strength steel revealed austenitic and bainitic-ferritic constituents. Hydrogen diffuses through austenite slower than bainitic ferrite. Discovering the effective hydrogen diffusion coefficient, subsurface hydrogen concertation and number of traps of …
-
ON THE CRYSTALLOGRAPHY OF BAINITIC TRANSFORMATION IN STEELS
… dimensional nature of a complex cementite-free bainitic microstructure. The faceted interfaces of bainitic ferrite were characterized and it was shown that the habit plane contains edge misfit dislocations. The orientation of the bainitic ferrite lath did not match an O-line model. …
-
Low Temperature Cleavage Fracture of Microalloyed Bainitic Plate Steels
… using four experimental microalloyed bainitic plate steels. The four plate samples were produced by different thermomechanical processing (TMP) schedules and had yield strengths in the range 540 - 670 MPa. Microstructures were characterized by optical microscopy (OM), scanning electron …
-
Welding of carbide-free bainitic steels for railway applications
Carbide Free Bainitic (CFB) steels B360 and B320 show an outstanding behaviour in terms of fatigue deformation mechanisms, mainly when analysing its resistance to head checks. This, results in a lower necessity for maintenance and therefore, in a reduction of costs. However, problems have been …
-
Mechanical Behavior of Carbide-Free Medium Carbon Bainitic Steel
Carbide-free bainitic (CFB) steels have gained increasing attention in recent years because of their excellent mechanical properties. The excellent combination of strength, ductility and toughness achieved in these steels is only matched by that of Maraging steels which cost 10 to 100 more than the …
-
Toughness of tempered bainitic microstructures in a 4150 steel alloy
… the toughness of these structures, different bainitic morphologies were tempered in a 4150 alloy steel. The toughness of two lower bainite morphologies was compared to that of upper bainite. After tempering at 600 C for 48 hours, the charpy upper shelf values for upper bainite approached those …
-
Hole expansion of retained austenite containing CMnSi bainitic/martensitic steels
… hole expansion properties when compared to bainitic and mixed bainite/martensite microstructures.
-
Creep-Fatigue-Environment Interaction in a Bainitic 2.25CR-1MO Steel
Made available in DSpace on 2017-07-06T18:49:06Z (GMT). No. of bitstreams: 3 Kschinka_Bruce_A_MS.pdf: 53614590 bytes, checksum: 68f9f75c937e0ea720438f927cbf2c9f (MD5) Kschinka_Bruce_A_MS_ABS.pdf: 884803 bytes, checksum: 834285a6942af2978b28454c49bc7b37 (MD5) license.txt: 4813 bytes, checksum: …
-
Mechanical and microstructural properties of ultra-low carbon bainitic steel weld metal
… susceptibility to cracking, Ultra-Low Carbon Bainitic (ULCB) steel weld wire is being investigated as a consumable for Gas Tungsten Arc (GTA) and Gas Metal Arc (GMA) welding of Navy high strength (100 ksi) steels. In the present work, a candidate ULCB weld wire was investigated for GTA and GMA …
-
Development of high strength hot rolled strip steel products with bainitic microstructures
… 700MPa yield stress strip steels with fully bainitic microstructures, with different compositions and/or processing conditions, have been studied. The microstructures of the steels were investigated with both optical microscopy and SEM. Micro-hardness and Charpy impact tests (at different …
-
Hydrogen embrittlement of 4340 with martensitic and bainitic microstructures for fastener applications
… embrittlement (HE) resistance of martensitic and bainitic microstructures has been evaluated in a range of hardness levels relevant to large fastener applications. Alloy 4340 was processed via quench and tempering, austempering, and austempering and tempering to achieve martensitic, bainitic, and …
-
Tempering response of mixed martensitic/bainitic microstructures in quench and tempered plate steels
… Therefore, comprehension of the tempering of bainitic and mixed microstructures is essential to help optimize tempering conditions for plate steels. The tempering response of martensitic, bainitic, and mixed microstructures was examined with a focus on alloying effects induced by molybdenum …
-
Characterization of ultra-low carbon bainitic steels for use as weld wire consumables
The use of Ultra-Low Carbon Bainitic (ULCB) steels for weld wire applications is an area of current interest to the U. S. Navy and is being jointly studied by the Naval Postgraduate School and the Naval Surface Warfare Center, Annapolis, MD. The focus of the present work is to determine the effect …
-
Temperature Dependence of the Persistent Cyclic Softening Behavior of Bainitic 2.25Cr-1Mo Steel
Made available in DSpace on 2017-07-06T18:49:07Z (GMT). No. of bitstreams: 2 Kucharski_Ronald_MS.pdf: 32956706 bytes, checksum: 62963cd30249387c58a0838f96886810 (MD5) license.txt: 4813 bytes, checksum: 715c4321821a960fa1a1e91d2ac7ebce (MD5) Previous issue date: 1989
-
Hot deformation, microstructure, and property analysis of ferritic/pearlitic and bainitic microalloyed forging steels
Includes bibliographical references.
Page 1 of 8