Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 150 for “"Band bending"”.
-
Band Bending in GaN
… or decrease the surface potential and thus band bending. Oxygen is the assumed species responsible for the SPV changes in air ambient during continuous UV illumination. This variation in SPV will be confirmed with photoluminescence measurements.
-
INVESTIGATION OF BAND BENDING IN n- AND p-TYPE GaN
This dissertation details the study of band bending in n- and p-type GaN samples with a Kelvin probe utilizing different illumination geometries, ambients (air, oxygen, vacuum 10-6 mbar), and sample temperatures (77 – 650 K). The Kelvin probe, which is mounted inside an optical cryostat, is used to …
-
Impact of doping and interfacial band bending of charge transport layer in inverted perovskite solar cells
… the n-doping reaction mechanism and interfacial band bending of charge transport layers (CTLs) in inverted perovskite solar cells (PSCs). CTLs, comprising electron transport materials (ETMs) and hole transport materials (HTMs), play a crucial role in determining the efficiency of PSCs by …
-
Investigation of Surface States and Device Surface Charging in Nitride Materials Using Scanning Kelvin Probe Microscopy
… Epitaxy (HVPE) typically show a high surface band bending of about 1 eV. In an n-type sample with 3X1017 cm-3 carrier concentration, 1 eV upward band bending corresponds to 1.7X1012 cm-2 trapped charge density in the surface states. Under continuous ultraviolet (UV) illumination up to 0.6 eV …
-
Scanning tunneling microscopy of Bi₂Se₃ and CuxBi₂Se₃
… high defect densities, strong surface band bending, and potential fluctuations have been observed. Here, scanning tunneling microscopy and spectroscopy are used to reveal surface effects in Bi₂Se₃ and CuxBi₂Se₃. First, a detailed examination of defects in bulk-grown samples is …
-
Spectroscopic characterization of the near-surface electronic structure of surface-modified III-V semiconductors
… pins the Fermi level closer to the valence band and subsequently increases the band-bending at the surface. In this research, passivation with a long-chain alkane thiol demonstrates the ability to passivate the surface while unpinning the Fermi level and reducing the surface band-bending. …
-
Tuning the electronic structure and plasmonic properties of doped metal oxide nanocrystals via surface chemistry
Doped metal oxide nanocrystals (NCs) are wide bandgap semiconductors that have attracted significant interest for their distinctive interaction with light. These materials exhibit a collective oscillation of free charge carriers when irradiated with light, known as the localized surface plasmon …
-
DEFECTS IN GaN: AN EXPERIMENTAL STUDY
… transient spectroscopy. Modeling of the surface band bending, its origin, and the effects of fabrication processing steps are discussed in the first part of the dissertation. Experimental results indicate that spontaneous polarization does not play a predominant role in GaN band bending. An …
-
Study of subthreshold behavior of FinFet
… distribution inside the fin, the appropriate band bending and the subthreshold value called the S-factor is calculated. It is observed that the S-factor of the device increases as the channel width, Tfin increases. This is attributed to the fact that the change in the band bending is less than …
-
Understanding and engineering zinc oxide nanolayer contacts for silicon-based tandem photovoltaics
… of the buried Si/AZO interface revealed upward band bending in the silicon, opposite in polarity to the downward bending previously assumed in theoretical studies of AZO-based contacts. A 450 °C air anneal followed by controlled cooling produced effective lifetimes above 1.3 ms at 1×1015 cm-3 …
-
Metal-aluminium gallium nitride Schottky contacts formation.
… in removing oxygen from the surface. Downward band bending of 0.87 eV and 0.99 eV also occurs between the solvents-treated and the annealed Al[x]Ga[1]-[x]N surfaces for x = 0.20 and 0.30, respectively.Increasing in-situ temperature annealing in increments of 100°C up to 600°C shows a …
-
The effects of mobile sodium contamination on MOS structures
… measuring photoemission was found to affect the band bending substantially so that a relatively simple model neglecting band bending in the silicon was used. Barrier height lowering caused by sodium contamination was measured on samples having a uniform photocurrent. By measuring samples at …
-
Investigation of the Chemical Evolution of InAs Native Oxide and Its Impact on the Surface Electronic Properties
… thickness, and correlated semiconductor band-bending converges to values with much less variation. </p>
-
Metal oxide heterostructured films with controlled architecture for enhanced photocatalytic properties
… of ZnO surface cleaning in the interfacial band bending, thereby analyzing the possibilities of their use as photocatalysts. Furthermore, we have explored the electrical, optical and interfacial properties of ZnO nanorods (n-type) with NiO coating (p-type) by varying the NiO deposition …
-
Paviršinio potencialo tyrimai virpančio zondo sistema /
… distribution on the sample surface, which causes band bending.
-
Excitations of Quasi-Particles in Nanostructured Systems
… be bleached with time, and recovered in minutes. Bandbending was observed when the semiconductor is in contacting with Au nanoparticles. This exciton has a signal reduction and blue shift introduced by the band bending. The higher energy exciton can be excited from the S<sub>0</sub> state to the …
-
A comprehensive study of surface and space charge effects at an operating water splitting iron oxide photoanode
… The SHG response is shown to correlate with the band bending at the electrode surface according to the electric field induced second harmonic (EFISH) theory in good agreement with photo-electrochemical analyses of the sample system. With this, it is possible to directly map and analyse surface …
-
Energy level alignment at the organic-organic heterojunction interfaces: The role of gap states
… mechanism, such as the Fermi level pinning and band-bending like behaviors, showing a step towards the understanding of the interfacial energetics at weakly interacting organic heterojuntions.
-
Titanium contacts on N-type silicon
… of the thermionic-diffusion theory for band bending between β = 9 and β = 2. At the upuer value of β the predictions of the thermionic-emission and thermionic-diffusion theories were almost identical and the diode behaviour was closest to ideal with n = 1.01. The lower value of β …
Page 1 of 8