Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 28 for “"Bar elements"”.
-
PAPNUM (version 3.0) a finite element modeling and preprocessing system
… the automated modeling of NASTRAN [2] Rod and Bar elements in the finite element modeling program PAPNUM, which includes the defini tion of the geometry and structural properties of all rod and bar elements in the finite element model. The necessary NASTRAN Bulk Data cards are automatically …
-
Χωρικά προσομοιώματα σύμμικτων γεφυρών με χρήση ραβδωτών στοιχείων
… is suitably represented by different sets of bar elements. On the other hand, the finite element method is preferred for the three-dimensional representation of the structure. Although these models are generally accepted as sufficiently accurate, they are associated with some drawbacks. To …
-
Study of steel-concrete interface behavior of reinforced concrete members
… continuum consisting of plane stress rectangular elements which represent the concrete, pin-joint two node bar elements which represent the reinforcing steel, and the nondimensional linkage elements which represent the bond stress-slip, aggregate interaction and dowel action effects. The load …
-
Emergent properties in the artificial magnetic honeycomb lattice of ultra-small elements
… with the geometric frustration at the magnetic bar vertices. The theoretically predicted phase diagram of the magnetic honeycomb lattice has four unique magnetic vertex configurations, completely dependent on temperature. The system will transition from a paramagnetic gas state to a spin ice …
-
Mechanical analysis of a growing carbon nanotube forest
… carbon nanotubes are modeled as linear frame elements interconnected at adjacent nodes. The van der Waals interaction between carbon nanotubes is modeled as bar elements. The fastest-growing carbon nanotube in the forest are restricted by surrounding tubes, thereby generating a compressive …
-
Análise de sensibilidade de um método expedito para avaliação dos esforços de tração em linhas de ancoragem
… Method (FEM), using tri-dimensions non-linear bar elements. The catenary equation is commonly used for evaluating tension in cables due to its low computational cost. However, this method does not consider the effects of damping and inertia in the lines. On the other hand, the FEM considers the …
-
A meshing technique for unsteady computational fluid dynamics solutions for rapidly changing boundaries and internal configurations
… and the interconnecting links in a mesh to the bar elements in a truss structure, the finite element solution of the truss structure can be used one-for-one to solve for the positions of the mesh points, using a simple matrix multiplication at each time increment in the CFD solution.
-
Three dimensional finite element analysis of a tibial ankle prosthesis
… case. Each model contains 924 nodes and 817 elements. Individual elements are assumed to be isotropic, but the elastic modulus and shear modulus of the bone are functions of location. Gap, spring and rigid bar elements are used to connect the tibial component to the bone. A uniform load is …
-
Behaviour of beam-to-column end plate connections in structural steelwork
… in the thesis. In addition to the solid and bar elements used to discretize the plates and bolts respectively, non-linear joint elements were employed to model the interactive forces induced between the end plate and column flange. The properties of the joint elements were chosen to ensure …
-
A Computational Tool for the Design of Prestressed Cable Supported Structures
… structures, a solver with Green strain bar elements is implemented. The tool extends the open-source BHoM code library. Output data from the tool is benchmarked by comparing results with analytical and numerical models. By exposing the functionality of the tool to user-interfaces such as …
-
Three-dimensional stratigraphic architecture and evolution of an ancient river-dominated delta, Iles Formation, Book Cliffs, Colorado
… parasequence in the Iles Formation. The mouth bars of parasequence 3 (PS 3) have three distinct regions, which are, from updip to downdip: proximal, medial, and distal. The proximal mouth bar is characterized by convex-up units of trough cross-stratified sandstone. The medial mouth bar region …
-
Fatigue behaviour of CFRP-repaired corroded RC beams
… to higher fatigue lives of smaller diameter bars and, secondly, to the presence of slip between the steel and surrounding concrete. This slip reduces strain localisation and, hence, stresses in the steel bar at the cracks. Also in this study, a finite element (FE) model is developed for …
-
Probabilistic Analysis of Unreinforced and Reinforced Soil Slopes Using the Random Finite Element Method
… approach. The FEM code was modified to include bar elements to model horizontal layers of geosynthetic reinforcement. Analysis results demonstrate that large reductions in probability of failure can be realized by adding geosynthetic reinforcement layers to constructed slopes. The same modified …
-
Probabilistic Analysis of Unreinforced Slopes and Reinforced Footings Using the Random Finite Element Method
… reinforcement layers as linear elastic-plastic bar elements together with two-layer random fields. The modified RFEM code for the foundation problem was used to examine the case of the footing sitting directly on a cohesive soil layer, and the same footing seated on unreinforced and geosynthetic …
-
Numerical Simulation of Free Standing Hybrid Risers
… jumper, both of which are modeled by beam elements (experienced both tensions and bending moments) in COUPLE. The buoyancy can is connected to the URA through a tether chain, which provides the vertical upright force on the URA and in turn the tension to the vertical riser. The tether chain …
-
Controls on the deposition, accumulation and preservation of mixed fluvial and marginal-marine successions in coastal-plain settings.
… the geometries of complicated architectural elements to be constrained. Mapping of channelised elements in three dimensions and the quantified analysis of their facies and geometry has been undertaken. Study sites, average spacing 3 km, have been used to produce a regional-scale correlation …
-
Shear resistance of reinforced concrete beams with and without steel fibres.
… bond stress slip characteristics of a deformed bar (Tor Bar) and the stiffness and ultimate strength of the shear-transfer mechanism across a definite plane respectively. The inclusion of fibres increased the ultimate strength of the beams by 63 to 211.5%. Fibre concrete beams had more flexural …
-
An efficient unit cell based numerical model for continuum representation of fabric systems
… of the yarns as an assembly of solid and bar elements and upon successful calibration, predicts the response of the fabric unit cell under the applied displacements. An efficient 2D shell crossover model is also developed that implicitly incorporates the extensional and shearing response …
-
Meso-Scale Simulation of Size-Dependent Shear Behavior in Glass Fiber Reinforced Polymer Reinforced Concrete Beams without Stirrups
… with glass fiberreinforced polymer (GFRP) bars without shear reinforcement. An important practical implication is that extrapolating strength values from typical laboratory-scaled experiments to design larger members may be misleading. The complexity of the underlying mechanics is reflected …
-
AN EVALUATION OF THE EFFECT OF GEOFABRICS ON STRESSES AND DISPLACEMENTS IN BURIED CULVERTS
… two-dimensional triangular and quadrilateral elements having nonlinear, stress-dependent material properties are used for representing the soil. Beam elements are used to model the culvert, no-compression bar elements are used for the fabric, and two-dimensional interface elements for the …
Page 1 of 2