Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 288 for “"Barrier Height"”.
-
Minimum Barrier Height That Produces a Resonance
… project that aims to investigate the minimum barrier height that produces a sharp resonance by combining a square well potential with a square barrier potential. This combination is a simple quantum mechanical system. Yet, it deserves a thorough investigation. We deal with this elementary …
-
Effect of Barrier Height on Magnitude and Character of Hurricane Harvey Washover Fans, Matagorda Peninsula, Texas
… retreat rates to explore relationships between barrier types and Hurricane Harvey storm washover sedimentation. Pre- and post-Hurricane Harvey topographic profiles were created on 15 transects using Bare Earth LiDAR (2016) and surveyed elevations (2019). Depth and area of washover fan …
-
A study of large barrier height Schottky Barrier Diodes using noble metal oxide contacts on β-Ga2O3
… way to overcome this challenge is by using large barrier height Schottky barrier diodes. In this work, we demonstrate a very high surface electric field of 4.3 MV/cm in vertical Schottky barrier diodes (SBDs) using sputtered PtOx contacts. Sputtering is a fast technique for depositing metal oxide …
-
Modeling and Characterization of Metal/SiC Interface for Power Device Application
… are commercially available such as Schottky barrier diodes with voltage rating of 300 - 1700 V (as of 2011) which often show non-ideal electrical behavior. Non-ideal electrical behavior is manifested in the abnormal current-voltage characteristics and greater than unity ideality factors. …
-
Advanced contact engineering for silicon, germanium and germanium-tin devices
… which is dependent exponentially on Schottky barrier height at the metal/semiconductor interface. In this thesis, through ion-implantation and segregation of impurity elements at the metal/semiconductor interface, modulation of Schottky barrier height has been developed for Si, Ge, and GeSn …
-
The effects of mobile sodium contamination on MOS structures
… breakdown. Lateral inhomogeneities in the barrier height at the Si-Si02 interface were probed by scanning a focussed beam of ultraviolet light along a MOS capacitor. It was found that barrier height was uniform unless highly contaminated samples were subjected both to a high temperature and …
-
Quantitative STM imaging of metal surfaces
… process, a method for deducing the tunnel barrier height has been developed which is based on corrugation height measurements of constant current topographs. From experiments on clean Cu(100), values of the tunnel barrier height have been shown to be somewhat below the workfunction (~ …
-
Schottky diodes on GaN (gallium nitride) semiconductors
… electrical characteristics of Au and Ni Schottky barriers on n-type GaN grown by gas phase molecular beam epitaxy were investigated. Capacitance-Voltage and Current-Voltage techniques were used to calculate the barrier height, carrier concentration and ideality factor. Two different processing …
-
The Effect of Pressure on The Height of The Schottky Barrier for Several Semiconductors (Diodes, Metal-Contacts)
… pressure (to (TURN)10 kilobars) on the schottky barrier height at the metal-semiconductor interface. Results are presented for CdS, CdSe, and ZnO together with measurements of the absorption edges for CdSe and ZnO. These results are used in conjunction with previously published flatband potential …
-
Electrical properties of metal/wse2structures
… the electrical properties of metal/WSe2 Schottky barrier diodes with various metals such as Au, In, Al, and Ga in the temperature range of 80K to 400K well within the domain of thermionic emission theory. Topics covered here include the factors that determine the Schottky barrier height, the …
-
An investigation of the metrological & spectroscopic capabilities of an ambient STM
… spectroscopy. The apparent tunnelling barrier height was calculated from current-distance (I-S) spectroscopy. For the Au(lll) surface imaged in Decalm a value of 1 4eV was calculated for the apparent barrier height, while for the same surface in a air value of 10 eY was calculated. The …
-
Characterization of cadmium telluride grain boundaries in cadmium telluride/cadmium sulfide solar cells
… samples herein. Values for the grain-boundary barrier height, the barrier height inhomogeneity, and the doping within the vicinity of the grain boundary were determined from the fits. The CdCl2 treatment was found to increase the hole grain-boundary barrier height by about 37%, and the doping …
-
Impedance characteristics and grain boundary effects in titanate-based multilayer ceramic capacitors
… A model for the grain boundary potential barrier height was developed. It was found that barrier height reduction occurs for small grain sizes due to depletion of the grain, and for increased grain curvature. Dopant effects are also responsible for barrier height reduction. These results, …
-
A fundamental study of advanced metal/semiconductor contacts
… we focussed on the inhomogeneity of the Schottky barrier height. Au/n-GaAs was used as a model metal/semiconductor contact, because it has a wide background in SB-research and because the advanced semiconductor GaAs is gaining importance in the semiconductor (mobile) industry. Small contacts were …
-
Two Dimensional, Time Dependent Modeling and Simulation of Semi-Insulating GaAs High-Power Photoconductive Switches
… and "lock on" phenomena, (b) the role of barrier height inhomogeneities on current characteristics. The barrier height fluctuations and inhomogeneities at the contacts have been shown to exert a strong affect on the dark dc I-U characteristics. However, the impact of this mechanism under …
-
Schottky Barrier Engineering for Contacts in Advanced CMOS Technology
… interface. Reducing the effective Schottky barrier height at this interface would reduce Rc. In this thesis, four different contact engineering techniques were explored to modulate the effective electron Schottky barrier height on silicon (Si), silicon-carbon (Si:C), and germanium (Ge) S/D …
-
Power Electronics Based on Ultrawide Bandgap Semiconductors: from Material Engineering to Device Applications
… metal-insulator-semiconductor Schottky barrier diodes (MIS SBDs). The BN layer is directly grown on the β-Ga2O3 by pulsed laser deposition (PLD). The presence of a ~2.8 nm BN layer is confirmed by a series of techniques, including X-ray photoelectron spectroscopy (XPS), Raman …
-
The Seebeck effect in thin film CdS and ZnₓCd₁₋ₓS
… lattice scattering dominates. The grain boundary barrier height increases with film thickness in CdS films due to a decrease in carrier concentration as film thickness increases making electron traps at the grain boundary influential. As the zinc concentration is increased the carrier …
-
Nanoscale Semiconductor/Catalyst Interfaces for Water Splitting Photoanodes
… the oxygen evolution reaction (OER) remains a barrier to the realization of commercially viable photoelectrochemical cells. Photoanodes are often fabricated by depositing a thin metal/metal-oxide protection layer on silicon. Studies have shown thinner protection layers correlate with higher …
-
Computer Simulation of Ion-Induced Nucleation in the Presence of Single Ions and Ion Pairs
… energy profile is a key factor controlling the barrier heights for different ions/pairs. When the minimum is located at larger cluster sizes, there is a smaller loss of gas phase entropy between the Gibbs free energy minimum and the critical cluster size (the cluster sizes contributing to the …
Page 1 of 15