Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 493 for “"Barrier properties"”.

  1. The Effect of Processing Parameters on Barrier Properties of Polymers

    <p>The intent of this work was to learn if polyethylene could be made with predictable water transfer rates by control of the microstructure. A series of films were formed from three different polyethylenes with a range crystallinities using melt pressing, a controlled cooling rate, and subsequent …

    utk-theses Repository record for The Effect of Processing Parameters on Barrier Properties of Polymers (opens in a new tab)

  2. Tailoring polymer blends and nanocomposites to tune the barrier properties

    … Therefore, in order to function as efficient barrier packaging materials, they must be engineered at a molecular level to inhibit the permeants. The transport of penetrant molecules through the polymeric materials is essentially determined by two factors: (i) potential capacity of the polymer …

    adelaide Repository record for Tailoring polymer blends and nanocomposites to tune the barrier properties (opens in a new tab)

  3. Enhanced Barrier Properties of Renewable Multiphase Polymer Coatings and Films

    … in bioplastics with acceptable physical properties. However, most single-phase biodegradable and bio-based bioplastics typically have poor moisture or oxygen barrier properties or both than traditional fossil fuel-based plastics, making it a challenging task to replace these plastics. …

    waterloo Repository record for Enhanced Barrier Properties of Renewable Multiphase Polymer Coatings and Films (opens in a new tab)

  4. Effect of Flexing on the Barrier Properties of Metallized Films

    … films is the effect of flexing on their barrier properties. Films encounter a series of mechanical stress situations during manufacturing, processing, handling, and distribution. These mechanical stresses often result in flexing of the packaging film, which is more prominent with …

    rit Repository record for Effect of Flexing on the Barrier Properties of Metallized Films (opens in a new tab)

  5. Independent Control of Barrier Properties in Thiol-Yne Click Polymers

    … are underserved by commercially-available barrier polymers with respect to degradation profile and biofluid barrier performance. In this work, we present thiol-Yne click chemistry as a synthetic platform for the preparation of new barrier materials fueled by previous observations that …

    duke Repository record for Independent Control of Barrier Properties in Thiol-Yne Click Polymers (opens in a new tab)

  6. IMPROVING GAS BARRIER PROPERTIES OF SUGARCANE-BASED LLDPE WITH CELLULOSE NANOCRYSTALS

    This study was aimed at improving the gas barrier property of sugarcane-based LLDPE using cellulose nanocrystals (CNCs). Specifically, this study evaluated the effect of testing methods (isostatic versus gravimetric) on CO2 permeability coefficient (PCO2) and/or O2 permeability coefficient (PO2) of …

    msu Repository record for IMPROVING GAS BARRIER PROPERTIES OF SUGARCANE-BASED LLDPE WITH CELLULOSE NANOCRYSTALS (opens in a new tab)

  7. Development of multilayer PLA/graphene nanocomposites with high oxygen barrier properties

    … the coating layers did not affect PLA's bulk properties (i.e., glass transition and melting temperatures, and crystallinity). Oxygen permeability (OP) tests were conducted at 23 °C and 0, 30, 60, and 90% relative humidity (RH). Oxygen plasma treatment did not affect the OP of the coated PLA …

    msu

  8. Characterisation of the mechanical and oxygen barrier properties of microfibril reinforced composites

    … quantifies the mechanical and oxygen gas barrier properties of polyolefin-based MFCs containing polyethylene terephthalate (PET) microfibrils. It is concerned not only with identifying MFCs with the best properties, but also with how manufacturing parameters influence those properties. …

    auckland-ms Repository record for Characterisation of the mechanical and oxygen barrier properties of microfibril reinforced composites (opens in a new tab)

  9. The Barrier Properties of the Skin of Aquatic and Semi-Aquatic Vertebrates

    … skin is a heterogeneous organ that acts as a barrier to the external environment. A crucial structure for skin barrier function is the tight junction (TJ) complex that links skin epidermal cells. TJ proteins have been examined in mammalian skin but little is known about skin TJ proteins of …

    york Repository record for The Barrier Properties of the Skin of Aquatic and Semi-Aquatic Vertebrates (opens in a new tab)

  10. Dynamic and Gas Barrier Properties of Multifunctional Polymer Composites Under Extreme Conditions

    … With the focus on the dynamic, creep and gas barrier properties of thermoplastic polymers under extreme conditions, this study primarily aims to provide robust improvement strategies on the basis of composite science and engineering. Two experimental setups were designed and validated to …

    toronto-retro Repository record for Dynamic and Gas Barrier Properties of Multifunctional Polymer Composites Under Extreme Conditions (opens in a new tab)

  11. The effect of microfibrillated cellulose characteristics on barrier properties for packaging applications

    … cellulose fibres into smaller fibrils – as a barrier coating for packaging applications. Coating paper or cardboard with a layer of microfibrillated cellulose could provide a sustainable packaging solution since this provides a barrier layer to oxygen and grease. The research project began …

    birmingham Download PDF for The effect of microfibrillated cellulose characteristics on barrier properties for packaging applications (opens in a new tab)

  12. Structure, wettability, and barrier properties of self-assembled monolayers on metallic surfaces

    … SAMs have been suggested for use as corrosion barriers, antifouling coatings, and as components of molecular electronics and lithography. Still, researchers lack the molecular description of the interfacial properties, structural features, and barrier properties of SAMs that would be useful for …

    rice Repository record for Structure, wettability, and barrier properties of self-assembled monolayers on metallic surfaces (opens in a new tab)

  13. Layer by Layer assembly of nanostructured coatingsfor flame retardancy and barrier properties

    … order to enhance their flame retardancy and gas barrier properties. The work has been split into two different topics: i) fabric flame retardancy and ii) gas barrier coatings for packaging applications. Within the first topic different strategies have been applied in order to enhance the flame …

    poli-torino Repository record for Layer by Layer assembly of nanostructured coatingsfor flame retardancy and barrier properties (opens in a new tab)

  14. Effect of rheology and crystallinity on processing and barrier properties of PHA

    … packaging a plastic layer is used to act as a barrier against, for example, gases, such as oxygen and carbon dioxide, and sunlight, as these can decrease the shelf life of the packaged food. However, the plastic film is produced from fossil-based resources and is not biodegradable. The …

    chalmers Repository record for Effect of rheology and crystallinity on processing and barrier properties of PHA (opens in a new tab)

Page 1 of 25