Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 11 of 11 for “"Batch foaming process"”.
-
Development of polymeric foam materials with improved mechanical and acoustic properties
This thesis addresses the processing, morphology, mechanical properties, and acoustic properties of new polymeric foam materials. A batch foaming process, a rotational mold foaming process and a constrained mold foaming process were designed and applied in the producing of polymeric foams. …
-
Development of High-temperature Thermoplastic Foams: Investigation on Foaming Behaviors of Sulfone Polymers
… the environmental footprint of manufacturing processes. Despite the economic and the environmental advantages of high temperature polymeric foams, the development is still at its inception. There is a limited number of studies on the foaming of high temperature polymers and the majority are …
-
Influence of Additives on the Foamability of Potato Starch based Biopolymers
… a twin screw extruder (TSE) and an internal batch mixer (Haake Mixer) with four different chain extenders. The modified blends were characterized by Parallel Plate Rheometry, DSC, Intrinsic Viscosity and SEM techniques. Finally, foamability of the modified blends was examined by using …
-
Constitutive modeling for mechanical behavior of polymer-clay nanocomposite foams
… loadings, crystallinity, strain rate, and foaming conditions on the foam morphology and mechanical properties of microcellular high density polyethylene (HDPE)/clay nanocomposites were studied. Intercalated clay structures were investigated in the nanocomposites, and microcellular foams …
-
Batch foaming of hot melt extruded excipient/disintegrant/API pharmaceutical formulations and the study of the effects of the resulting cellular structures on API dissolution
… of this research, the Hot Melt Extrusion (HME) process is used to compound the following pharmaceutical formulations: EPO/AcDiSol/INM and EPO/Cros/INM containing different percentages of disintegrant. Comprehensive characterization of this system carried out by Hot-stage Polarized Optical …
-
Benign Processing of High Performance Polymeric Foams of Poly(arylene ether sulfone)
… of high performance polymer foams via a benign foaming process. The first goal of this project was to develop a process and the conditions necessary to produce a low density (>80% density reduction) foam from poly(arylene ether sulfone) (PAES). Water and supercritical carbon dioxide (scCO2) were …
-
Design of a dynamic covalent composite network for smart reprocessable shape memory systems
… and actuators due to their low cost, easy processing, low density and large recoverable strains. In addition, improvement of their stiffness can be achieved by combining a shape memory polymer with various fillers leading to shape memory composites. Advantageously, the judicious selection …
-
Foaming of amorphous drug delivery systems prepared by hot melt mixing and extrusion
… academe and pharmaceutical industry in exploring foaming processes and their products in drug delivery applications. However, there is still little knowledge of the impact of the morphology of the foamed structures on the performance of drug products in spite of some publications in this area. …
-
Continuous microcellular foaming of polylactic acid/natural fiber composites
… structures in the composite.Microcellular foaming uses inert gases (e.g., carbon dioxide) as physical blowing agents to make cellular structures with bubble sizes of less than 10 μm and cell-population densities (number of bubbles per unit volume) greater than 10<super>9</super> …
-
Παραγωγή βιοαποικοδομήσιμων και βιοσυμβατών μικροκυψελωτών υλικών
In this thesis, foaming of various polymers using CO2 was studied. At the same time, compositions and densities of liquid and vapor phases for two binary systems at equilibrium were measured and the performance of the recently developed NRHB (Non Random Hydrogen Bonding) theory was tested. Firstly, …
-
Morphology control of polystyrene foams with supramolecular additives
… behavior, optimum concentration and applied processing procedure including different processing parameters. Supramolecular additives are used for example as nucleating and clarifying agents for semi crystalline polymers and recently as foam nucleating agents. So far supramolecular foam …