Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 55 for “"Battery modeling"”.

  1. Multi-cell battery modeling

    The battery is commonly used in various electronics devices ranging from laptop computers to large-scale energy storage. Due to the limited battery energy capacity, battery management is very critical to system performance. In order to maximize the battery’s performance, it is important to derive a …

    nebraska Repository record for Multi-cell battery modeling (opens in a new tab)

  2. Advanced battery modeling for interfacial phenomena and optimal charging

    … rate and enhanced safety for lithium-ion battery (LIBs) are urgently needed. To solve these challenges, the relevant physics at different length scale need to be understood. However, experimental study is time consuming and limited in small scale’s study. Modeling techniques provide us …

    must-thes Repository record for Advanced battery modeling for interfacial phenomena and optimal charging (opens in a new tab)

  3. Thermal Analysis and Battery Modeling of Structural Battery Composites

    … finite element analysis (FEA) of a structural battery is presented. A simplified model was developed based on a one-dimensional coordinate in through-thickness direction of the battery. This model simulates the thermal behavior of a structural cell during the (dis)charge cycle. The mathematical …

    chalmers Repository record for Thermal Analysis and Battery Modeling of Structural Battery Composites (opens in a new tab)

  4. Trajectory Simulation With Battery Modeling for Electric Powered Unmanned Aerial Vehicles

    … monitored by the State-of-Charge (SOC) of the battery. To understand the capabilities of the battery, discharge experiments can be conducted in lab environments; however, sometimes the results are difficult to integrate in flight simulations. In this thesis, a trajectory simulation is developed …

    odu Repository record for Trajectory Simulation With Battery Modeling for Electric Powered Unmanned Aerial Vehicles (opens in a new tab)

  5. STUDY OF HYBRID ELECTRIC VEHICLE BATTERY MODELING AND CONTROL USING AUTONOMIE

    This report presents the research results of battery modeling and control for hybrid electric vehicles (HEV). The simulation study is conducted using plug-and-play powertrain and vehicle development software, Autonomie. The base vehicle model used for testing the performance of battery model and …

    mtu Repository record for STUDY OF HYBRID ELECTRIC VEHICLE BATTERY MODELING AND CONTROL USING AUTONOMIE (opens in a new tab)

  6. Battery Management and Battery Modeling Considerations for Application in a Neighborhood Electric Vehicle

    … (NEV) from lead-acid batteries to a swappable battery pack consisting of lithium iron phosphate (LiFePO4), or LFP, cells. Although LFP cells are considered safer than other lithium-ion cells, a new battery charger and battery management system (BMS) were installed to ensure proper function and …

    ku Repository record for Battery Management and Battery Modeling Considerations for Application in a Neighborhood Electric Vehicle (opens in a new tab)

  7. Cyber Security of Grid-Scale Battery Energy Storage Systems using Battery Modeling and Statistical Methods

    Battery Energy Storage Systems (BESSs) are cyber-physical systems (CPSs) that can be implemented at the grid-scale to supplement intermittent energy generation sources by storing excess energy and supplying energy for grid balancing. To meet grid scale requirements, hundreds of battery cells may be …

    ttu Repository record for Cyber Security of Grid-Scale Battery Energy Storage Systems using Battery Modeling and Statistical Methods (opens in a new tab)

  8. Hybrid electric vehicle simulation and evaluation

    … adopted by the UT-HEV NEON. A practical way of battery modeling is incorporated into this model. The model was developed on the basis of ADVISOR, which is a HEV simulation model developed at the National Renewable Energy Laboratory with different power control scheme and battery modeling. Some …

    ut-knoxville Repository record for Hybrid electric vehicle simulation and evaluation (opens in a new tab)

  9. Reduced order physics-based lithium-ion battery models and optimal control strategies

    … in the design of optimal control strategies for battery charging and the investigation of battery degradation mechanisms in commercial lithium-ion batteries. I propose a physics-based battery modeling approach to simulate the degradation behavior of commercial lithium-ion cells. Physics-based …

    texas Repository record for Reduced order physics-based lithium-ion battery models and optimal control strategies (opens in a new tab)

  10. Life-cycle assessment and circular economy driven materials selection and numerical simulation of lithium-oxygen batteries

    … density batteries. Commercialization of new battery chemistries is projected to expand the range of electric vehicles (EV) and enable electrified aviation. This is a nontrivial affair, as the physio-chemical processes for next-generation chemistries are not always well understood, and …

    colo-mines Repository record for Life-cycle assessment and circular economy driven materials selection and numerical simulation of lithium-oxygen batteries (opens in a new tab)

  11. Energy Optimized Driving Strategy Using Machine Learning

    … adaptive cruise control (ACC) model for battery electric vehicles (BEVs) using the Deep Deterministic Policy Gradient (DDPG) algorithm. The study explores the potential of DDPG in creating an ACC system that maximizes energy efficiency while considering battery life. Battery modeling and …

    chalmers Repository record for Energy Optimized Driving Strategy Using Machine Learning (opens in a new tab)

  12. Energy-Efficient Battery-Aware MAC protocol for Wireless Sensor Networks

    … nodes’ batteries. However, recent studies about battery modeling and behaviour showed that the pulsed discharge mechanism and the charge recovery effect may have a significant impact on wireless communication in terms of power saving. In this thesis we propose two battery-aware MAC protocols that …

    ottawa-retro Repository record for Energy-Efficient Battery-Aware MAC protocol for Wireless Sensor Networks (opens in a new tab)

  13. PHYSICS-INSPIRED AND CONTROL-ORIENTED MODELING OF LITHIUM BATTERIES FOR ACCURATE STATE-OF-CHARGE PREDICTION AND FAST-CHARGING

    … data-driven framework for lithium-ion battery modeling and control, designed to enhance state prediction accuracy and optimize fast-charging strategies across diverse operating conditions. It addresses key challenges in battery management systems for critical applications such as …

    temple Repository record for PHYSICS-INSPIRED AND CONTROL-ORIENTED MODELING OF LITHIUM BATTERIES FOR ACCURATE STATE-OF-CHARGE PREDICTION AND FAST-CHARGING (opens in a new tab)

  14. OPTIMAL PROBING OF BATTERY CYCLES FOR MACHINE LEARNING-BASED MODEL DEVELOPMENT

    … machine learning-based electrochemical battery models. The key idea is that data selection, or “probing” can empower such models to achieve greater fidelity levels. The dissertation is motivated by the potential of battery models to enable theprediction and optimization of battery …

    maryland Repository record for OPTIMAL PROBING OF BATTERY CYCLES FOR MACHINE LEARNING-BASED MODEL DEVELOPMENT (opens in a new tab)

  15. Series Resonant Switched Capacitor Converter for Electric Vehicle Lithium-Ion Battery Cell Voltage Equalization

    Extending the lifetime of the battery system of the Electric Vehicles will affect the economic feasibility of the vehicle. Connecting the battery cells in series raise the problem of imbalance voltages of the cells caused by Difference of internal resistance, imbalanced SoC, gradients of ambient …

    concordia Download PDF for Series Resonant Switched Capacitor Converter for Electric Vehicle Lithium-Ion Battery Cell Voltage Equalization (opens in a new tab)

  16. Modeling and Optimizing Porous Electrodes With Phase Transitions and Intercalation Stress

    … investigates the optimization of lithium-ion battery electrode parameters and the utilization of advanced simulation techniques to enhance battery performance. Layered lithium nickel-manganese-cobalt oxide (NMC) and lithium iron phosphate (LFP) are the two most widely used cathode materials …

    rice Repository record for Modeling and Optimizing Porous Electrodes With Phase Transitions and Intercalation Stress (opens in a new tab)

  17. Development of a Multi-Scale Mechano-Electrochemical Battery Model

    … electrochemical phenomena at each scale in the battery system. The resulting model establishes three novel improvements to the field of mechano-electrochemical battery modeling: (1) A representative volume element model was incorporated into standard battery models to generate realistic …

    south-carolina Repository record for Development of a Multi-Scale Mechano-Electrochemical Battery Model (opens in a new tab)

  18. Fault Diagnosis of Lithium Ion Battery Using Multiple Model Adaptive Estimation

    … others. To extract maximum output from a Li-ion battery under optimal conditions it is imperative to have access to the state of the battery under every operating condition. Faults occurring in the battery when left unchecked can lead to irreversible, and under extreme conditions, catastrophic …

    iupui Repository record for Fault Diagnosis of Lithium Ion Battery Using Multiple Model Adaptive Estimation (opens in a new tab)

  19. Development and management of advanced batteries via additive manufacturing and modeling

    … densities, improved safety, and sophisticated battery management systems. To satisfy these demands, as battery performances depend on the network of constituent materials, it is necessary to optimize the electrode structure. Simultaneously, the states of the battery have to be accurately …

    must-thes Repository record for Development and management of advanced batteries via additive manufacturing and modeling (opens in a new tab)

Page 1 of 3