Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 32 for “"Beam Characterization"”.
-
Electron beam characterization of carbon nanostructures
… These simulation results are applied to the characterization of nanocrystalline carbon cores found in a subset of graphitic presolar stardust. Electron diffraction data from these cores indicates they are comprised primarily of unlayered graphene sheets. Comparison to simulations indicates …
-
Beam characterization at the neutron radiography reactor
The quality of a neutron imaging beam directly impacts the quality of radiographic images produced using that beam. Fully characterizing a neutron beam, including determination of the beam's effective length-to-diameter ratio, neutron flux profile, energy spectrum, image quality, and beam …
-
High-dimensional, multiplexed, single-shot ptychography for spatiotemporal ultrafast pulse-beam characterization
… reference-free, full-field spatiotemporal characterization of ultrafast pulse-beams. This thesis also details two precursor techniques: spatiospectral characterization with scanning multiplexed broadband ptychography, and single-pulse, reference-free, full-field spatiospectral …
-
Methods for dose calculation and beam characterization in external photon beam radiotherapy
Treatment planning in external photon beam radiotherapy requires fast and accurate methods for the calculation of an absorbed dose distribution in a patient. Modern dose calculation algorithms also require characterization of the radiation beam produced by a medical linear accelerator. In this …
-
HIGH-FIELD THZ GENERATION AND BEAM CHARACTERIZATION WITH LASER BASED INTENSE THZ SOURCES
… field strengths up to tens of MV/cm and their characterization with energy, pulse duration, and spot size measurements. As a strong THz source, we used two-color laser mixing in air, which can produce coherent, high energy (> µJ), broadband (0.01~100 THz) THz radiation. In this scheme, 800-nm, …
-
A loss tangent measurement surface for free space focused beam characterization of low-loss dielectrics
… metasurfaces to augment free-space material characterization measurements and enhance sensitivity for characterizing low-loss samples, is presented. The relationship of a metasurface resonance to the varying permittivity and thickness of arbitrary dielectric layers on either side of the …
-
Long-Distance Flux Mapping Using Low-Cost Collimated Pyranometers
… designs emerge to reduce costs. Conventional beam characterization systems that use photographs of the reflected beam on a tower-mounted target are typically not large enough to capture the beam at large distances, and the magnitude of the irradiance for long-distance heliostats is quite low …
-
Stiklo tūrinis modifikavimas pikosekundinio lazerio impulsais ilgos nedifraguojančios zonos pluoštu /
… glass cutting experiments of asymmetrical Bessel beam formed in a conical prism (axicon). Goal of the work: to study asymmetric methods of Bessel beam formation and their application for glass modification/cutting. Different beam filtering methods are compared: symmetrical beam, modulation of …
-
CONTROL AND TRANSPORT OF INTENSE ELECTRON BEAMS
The transport of intense beams for advanced accelerator applications with high-intensity beams such as heavy-ion inertial fusion, spallation neutron sources, and intense light sources requires tight control of beam characteristics over long distances. The University of Maryland Electron Ring …
-
Design of SRAM Based Dosimetry Used for Neutron and Proton Detection
… to calibrate and characterize neutron and proton beams with wide-range spectra. The design of the SRAM dosimeter includes both hardware and software. An array of thirty 16-Mbit off-the-shelf 65 nm SRAMs are used as sensors directly exposed to radiation. An FPGA is used as a processor to analyze …
-
In-situ Assessment of Radiation Hardness, Defect Dynamics, and Recovery Mechanisms in Space-Grade Semiconductor Solar Cell Devices
… develops and applies in-situ and in-operando ion beam characterization platforms at the University of North Texas Ion Beam Laboratory to study radiation hardness, defect dynamics, and recovery in semiconductor solar cell devices. Energy-tuned proton irradiation of single-junction perovskite solar …
-
Effects of High Temperature Compaction on 3D Printed Carbon Fiber Reinforced Polymer Composites
… scanning electron microscopy, double cantilever beam testing and three-point bending testing. When considered with respect to as-printed samples, an HTC temperature of 190°C combined with 80 psi pressure resulted in increased flexural modulus and flexural strength by 47% and 58%, respectively. …
-
Simulation of optical impacts of gravity-induced deformations of concentrating solar collectors
… of collectors. Together the deformations and beam characterization lead to a useful, cost-effective process to analyze solar collectors. The results of the study show that the simulations presented can accurately match experimental data. The final process allows for design changes to be …
-
Fieldable Neutron Imaging System: Simulation and Experimentation into the Viability of Associated Particle Imaging in Austere Field Environments
… file. As part of this simulation process, a new beam characterization profile for the Russian ING-27 DT generator has been developed. The result is a double gaussian fit comparable to the characterization of the Thermo Scientific API-120 system. A series of objects and misalignment experiments …
-
Commissioning & Daily QA of Converted LINAC for Electron FLASH
… detector response, dose-per-pulse effects, and beam control limitations. This thesis presents the commissioning of a converted Varian 21EX linear accelerator for electron FLASH operation within the Division of Medical Physics at the Virginia Commonwealth University (VCU) Department of Radiation …
-
Apparatus and Instrumentation Design for Investigation of Surface Impact Effects on Superconductivity
… as well as, its planned uses. An explanation of beam characterization using the Faraday cup and faceplate is also provided in this chapter. Chapter 3 shows simulated and calculated results for the setup. Examples are given of data using the niobium experiment that is described in chapter 1. An …
-
Design and Analysis of the Onsala 4mm Receiver and other Antenna Configurations for Millimetre Wave Astronomy
… new science at that longer wavelength. Gaussian beam mode analysis was used to produce the fundamental optical design. This is computationally efficient, and provides all critical beam characterization through the optical train within the paraxial limit. The design was analysed more accurately …
-
Asteroid Control via Neutral Beam Emitting Spacecraft
… yet to be discovered. We propose using neutral beam equipped spacecraft to deflect an asteroid from an Earth impact trajectory. Neutral beams are created through global neutralization of ion beams via recombination reactions and contain no charged particles. This thesis focuses on the design and …
-
Experimental investigations of pseudospark discharge and pseudospark produced intense electron beams
… experiment setup, and discharge and electron beam diagnostic system are constructed and presented in this work. Three journal articles which have been published or are under review are presented in this dissertation on various topics of the pseudospark discharge. Paper 1 "Experimental …
-
STUDY ON EFFICACY IMPROVEMENTS AND QUALITY OF THE PROTONTHERAPY TREATMENTS
… quality improvement cannot neglect a precise beam characterization as well as the optimisation of its transport parameters. Accordingly, a special task was focused on the improvement of the INFN (Istituto Nazionale di Fisica Nucleare) multidisciplinary facilities: LNS (Laboratori Nazionali del …
Page 1 of 2