Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 99 for “"Beam test"”.
-
A beam test for adhesives
… materials solution for a new bonded cantilever beam test specimen to determine adhesive shear properties is reviewed and discussed. A parametric analysis for the adhesive shear stress and for the end deflection reveals the specimen dimensions required for reliable bonded adhesive shear …
-
Modeling of a novel solar down beam test facility utilizing Newtonian optics
… be an increase in the demand of resources for testing new conceptions. Currently, there are limited facilities available for taking concentrated solar energy concepts from the laboratory bench scale to the engineering test scale. A proposed solution is a scientific and developmental facility …
-
Bond Strength Measurements from a TAMU Unbalanced Bond Wrench in Comparison to Brick Prism ASTM E518 Beam Test
… at Texas A&M University and Standard ASTM E518 beam test method. This experimental research uses Portland cement and a total of 50 prisms was built in two sets. Each prism comprised of six bricks with five joints, and all the bricks used were Texan bricks. The mortar used here was 1:1:6. The …
-
Bond Strength Measurements from a TAMU Balanced Bond Wrench in Comparison to Brick Prism ASTM E518 Beam Test
… be measured using a bond wrench or a standard test like ASTM E518 beam test. The early bond wrenches were developed in the 1980s in Australian laboratories. In 2011, an Australian bond wrench was manufactured and consequently an ASTM C1072 Bond Wrench was developed in 2012. Further research was …
-
Calibration and response of the high pseudorapidity region of the ATLAS liquid argon end-cap calorimeters
… liquid argon calorimeters underwent particle beam testing in 2004. One of the main goals of these tests is to study energy reconstruction in the complex interface region between the electromagnetic. hadronic, and forward calorimeters at. 1 - 3.2. These detectors were exposed to beams of …
-
Position resolution of the ATLAS electromagnetic endcap calorimeter
… modules of the ATLAS detector are exposed to beams of electrons, pions, and muons in the energy range 6 GeV ≤ E ≤ 200 GeV at several impact positions in the pseudo-rapidity 1.6 ≤ |η| ≤ 1.8 in a beam test at CERN. The EMEC is a lead-liquid argon sampling calorimeter with a unique accordion …
-
Search for heavy lepton resonances decaying to a Z Boson and a lepton in proton-proton at [radical]s = 8 TeV with the ATLAS detector and investigations of radiation tolerant silicon strip detectors for the high-luminosity LHC upgrade of the ATLAS inner detector
… Inner Tracker. Among these are the results of a beam test providing the first comparative results between planar n-in-p and 3D silicon strip sensors, where the electrodes are etched into the silicon substrate. The six sensors in this beam test were irradiated with fluences of up to 3x10e15 …
-
Development of learning control algorithms for mechatronics systems
… systems, such as hard disk driveservo, ball-and-beam test bed and a model of a microrobot.Extensive simulations and experimental results show that thelearning schemes developed achieve good performance.
-
Plasma non-uniformity in the JET neutral beam injection ion source: measurement, simulation and development of an improved ion source
For Neutral Beam Injection at JET an ion source is required with a high monatomic species yield. It is now clear that the magnetic filter field arrangement used to enhance the monatomic species yield also produces non-uniformity in the ion source plasma density. This property was known from …
-
Characterization of cement-kiln-dust stabilized base/subbase aggregate.
In this study, a laboratory testing program was undertaken to determine the resilient modulus and other properties of a cement-kiln-dust (CKD) stabilized aggregate that are important to the design and rehabilitation of roadway pavements. Meridian limestone aggregate, which is considered to be of …
-
Evaluation of bond between pavement layers: fracture mechanics approach
… conducted to examine interface bonding and many test methods have been proposed to evaluate the bonding between pavement layers. However, a review of the literature has shown that research on interface bonding using fundamental fracture mechanics has been very limited and is still in its early …
-
Relative strength coefficients for pavement design in Tennessee
… flexible pavement design and construction. Testing was conducted on "as-constructed" pavements using a Benkleman beam test device.</p><p>During the investigation, twelve sites at two test sections were tested after each new pavement lift had been placed. Maximum pavement deflections were …
-
A methodology of calibrating flexible fibers in the discrete element method for simulating wheat straw shear
… procedure utilized three different tests, the cantilever beam test, the 3-point-bending</p> <p>test, and the uniaxial compression test. The calibration was validated with the direct shear test.</p> <p>The cantilever beam test and 3-point-bending test were utilized together to …
-
Evaluating Embedded Heater Bonding for Composites
… conditions using a modified single cantilever beam test. Experimental results show that the delamination toughness of specimens bonded using a carbon fiber embedded heater was comparable to that of samples bonded in an autoclave.
-
The Static and Fatigue Behaviour of Through-Bolt Shear Connectors in Steel-Precast Composite Bridge Girders
… through-bolt shear connectors in composite beams. Therefore, the following research project investigates the static and fatigue performance of these connectors. In order to do this, three large-scale composite beam specimens were fabricated, instrumented, and tested in an experimental …
-
Effect of temperature on the mechanical behavior of the CNT reinforced epoxy
… in thermal chamber to perform thermal cycling tests. Each thermal cycle would be to heat the plates from room temperature to 0.85Tg which is 85% of the epoxy glass transition temperature (Tg). The glass transition temperature of the epoxy was determined in the lab using DSC. For measuring the …
-
Identification of High Energy Cosmic Ray Electrons Using Advanced Techniques in CALET and Fermi LAT
… of the LAT, exploiting calibration data from the beam test campaign. Within both studies, we employ multivariate techniques to improve the identification of cosmic ray electrons from the vast background.
Page 1 of 5