Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 69 for “"Beam-Column Joints"”.

  1. Fiber Reinforced Beam-Column Joints Undergoing Stress Reversals

    A beam-column joint was analysed [sic] using the specifications of ACI-ASCE Commitee [sic] 352. The adequacy of confinement, spacing of bars, the design strength of the joint in shear, flexural strength ratios and the moment strength of the longitudinal beams were studied. The load that caused the …

    marquette Repository record for Fiber Reinforced Beam-Column Joints Undergoing Stress Reversals (opens in a new tab)

  2. Seismic Rehabilitation of Concrete Frame Beam-Column Joints

    … the joint zone or inadequate anchorage length of beam bars are some of the main characterisitics of these structures. Post-earthquake investigations confirmed the vulnerability of these structures to severe earthquakes. Poorly designed joints, especially the exterior ones have been identified as …

    mcmaster Repository record for Seismic Rehabilitation of Concrete Frame Beam-Column Joints (opens in a new tab)

  3. Seismic behaviour of deficient exterior RC beam-column joints.

    … that stiffness and strength deterioration of beam-column joints can have a detrimental effect on the integrity and vulnerability of reinforced concrete frame structures, especially in older buildings in developing countries. As a result, there is a need to develop efficient structural …

    whiterose Download PDF for Seismic behaviour of deficient exterior RC beam-column joints. (opens in a new tab)

  4. Behavior of reinforced fibrous beam-column joints under cyclic loads

    … testing program consisted of ten beam-column joints with half of these joints containing 1-1/2 percent hooked end fibers. The beam column joints were constructed with less hoops than a conventional seismic joint would have, according to design specifications of the American …

    njit Repository record for Behavior of reinforced fibrous beam-column joints under cyclic loads (opens in a new tab)

  5. Anchorage of Headed Reinforcing Bars in Exterior Beam-Column Joints

    … been performed on the behavior of headed bars in beam-column joints, particularly with regard to their use with high-strength steel or high-strength concrete. As a result, current ACI design provisions (ACI 318-14) limit the yield strength of headed bars to 60,000 psi and concrete compressive …

    ku Repository record for Anchorage of Headed Reinforcing Bars in Exterior Beam-Column Joints (opens in a new tab)

  6. Reinforced concrete beam-column joints strengthened in shear with embedded bars

    Beam-column (BC) joints play an important role in the seismic performance of moment-resisting reinforced concrete (RC) frame structures. Without adequate joint shear reinforcement, BC joints can be the most vulnerable elements during an earthquake. Several techniques for improving the seismic …

    birmingham Download PDF for Reinforced concrete beam-column joints strengthened in shear with embedded bars (opens in a new tab)

  7. GFRP-reinforced concrete exterior beam-column joints subjected to seismic loading

    … not been widely investigated. The behaviour of beam-column joints significantly influences the response of the Seismic Force Resisting Systems. Therefore, both the design and detailing of the beam-column joints are critical to secure a satisfactory seismic performance of these structures. …

    manitoba Repository record for GFRP-reinforced concrete exterior beam-column joints subjected to seismic loading (opens in a new tab)

  8. Performance of Fibre Reinforced Concrete Beam-Column Joints under Cyclic Loading

    … steel fibre reinforced concrete (SFRC) on beam-column joint performance in concrete structures. A comprehensive laboratory study on reinforced concrete beam-column sub-assemblages was undertaken to determine strength, ductility and softening characteristics of FRC members subjected to …

    unsw Repository record for Performance of Fibre Reinforced Concrete Beam-Column Joints under Cyclic Loading (opens in a new tab)

  9. Extended end-plate beam-column joints in seismic moment resisting frames

    … be further studied is the seismic performance of beam-to-column joints. During severe earthquakes, joints can undergo severe inelastic deformations affecting the strength, stiffness and inelastic action distribution throughout the frames. Therefore, the objectives of this study are to investigate …

    mcmaster Repository record for Extended end-plate beam-column joints in seismic moment resisting frames (opens in a new tab)

  10. Investigating shear capacity of RC beam-column joints using artificial intelligence techniques

    Beam-column joints are critical zones in reinforced concrete structures. The behavior of joints is very complex and governed by different mechanisms such as flexure, shear, and bond stress between the reinforcement and the concrete. Shear transfer mechanisms through the joint are one of the most …

    unlv Repository record for Investigating shear capacity of RC beam-column joints using artificial intelligence techniques (opens in a new tab) Download PDF for Investigating shear capacity of RC beam-column joints using artificial intelligence techniques (opens in a new tab)

  11. Seismic performance of GFRP-RC exterior beam-column joints with lateral beams

    … reinforced polymer reinforced concrete (FRP-RC) beam-column joints. Those researches were mainly focused on exterior beam-column joints without lateral beams. However, lateral beams, commonly exist in buildings, can significantly improve seismic performance of the joints. Moreover, the way the …

    manitoba Repository record for Seismic performance of GFRP-RC exterior beam-column joints with lateral beams (opens in a new tab)

  12. ANCHORAGE STRENGTH OF STANDARD HOOKED BARS IN SIMULATED EXTERIOR BEAM-COLUMN JOINTS

    … are based on test results of 38 simulated beam-column joints containing two hooked bars. The provisions address the effects of hooked bar surface condition, concrete cover, amount of confining reinforcement confining the hooks, and type of concrete (normalweight or lightweight). This study …

    ku Repository record for ANCHORAGE STRENGTH OF STANDARD HOOKED BARS IN SIMULATED EXTERIOR BEAM-COLUMN JOINTS (opens in a new tab)

  13. Experimental and Nonlinear Finite Element Analysis of Double Skin Beam-Column Joints

    … (DSC) or Steel-Concrete-Steel (SCS) elements (beams, slabs and columns) have been subjected to intensive studies during the last three decades. Member beam, column and slab have been studied under monotonic, cyclic and fatigue loading, and there are also a few studies on impact loading to …

    whiterose Download PDF for Experimental and Nonlinear Finite Element Analysis of Double Skin Beam-Column Joints (opens in a new tab)

  14. Improving the Performance of Reinforced Concrete Beam-Column Joints Designed for Seismic Resistance

    The testing of thirteen large scale beam-column joints forms the framework for the content of this thesis. The thirteen tests were divided into three series, each of which investigated an aspect of earthquake resistant design of moment resisting frames. The results obtained from testing the first …

    auckland-ms Repository record for Improving the Performance of Reinforced Concrete Beam-Column Joints Designed for Seismic Resistance (opens in a new tab)

  15. Seismic Behaviour of Exterior Beam-Column Joints Reinforced with FRP Bars and Stirrups

    Reinforced concrete beam-column joints (BCJs) are commonly used in structures such as parking garages, multi-storey industrial buildings and road overpasses, which might be exposed to extreme weathering conditions and the application of de-icing salts. The use of the non-corrodible fiber-reinforced …

    manitoba Repository record for Seismic Behaviour of Exterior Beam-Column Joints Reinforced with FRP Bars and Stirrups (opens in a new tab)

  16. Cyclic Loading Behavior of CFRP-Wrapped Non-Ductile Reinforced Concrete Beam-Column Joints

    … grooves within the concrete cover. Concrete beam-column joints designed and constructed before 1970s were characterized by weak column-strong beam. Lack of transverse reinforcement within the joint reign, hence lack of ductility in the joints, and weak concrete could be one of the main …

    portland-state Repository record for Cyclic Loading Behavior of CFRP-Wrapped Non-Ductile Reinforced Concrete Beam-Column Joints (opens in a new tab)

  17. An Analytical Study on the Behavior of Reinforced Concrete Interior Beam-Column Joints

    … the United States and throughout the world. The beam-column (BC) joints are the most crucial regions in a RC moment frame structure as any deterioration of strength and/or stiffness in these areas can lead to global collapse of the structure. Thus, accurate simulations of the joint behavior are …

    vt Repository record for An Analytical Study on the Behavior of Reinforced Concrete Interior Beam-Column Joints (opens in a new tab)

  18. Nonlinear Cyclic Truss Model for Beam-Column Joints of Non-ductile RC Frames

    … environment in areas with seismic hazards. The beam-to-column joints of these frames are key components that have a significant impact on the structure's behavior. Modern detailing provides sufficient strength within these joints to transfer the forces between the beams and the columns during a …

    vt Repository record for Nonlinear Cyclic Truss Model for Beam-Column Joints of Non-ductile RC Frames (opens in a new tab)

Page 1 of 4