Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 39 for “"Beam-end"”.
-
Effect of partial debonding of prestressing strands on beam end cracking
… technique to reduce high tensile stresses in the end region of prestressed concrete members. However, damage in the ends of prestressed beams with shielded strands has been increasingly experienced during strand detensioning. Guidelines on the use of debonded strands, such as the AASHTO …
-
A Component-Based Approach to Modelling Beam-End Buckling Adjacent to Beam-Column Connections in Fire
… of the building was triggered by the fracture of beam-to-column connections caused largely by thermal expansion of long-span beams. This emphasized the importance of investigating the complex mechanisms through which forces are transferred from the adjacent parts of a structure to the connections …
-
Experimental and theoretical analysis of boltless semi-rigid connectors
… formed thin walled rack structures. A typical beam end connector consists of an end plate welded to the end of a beam and an interlocking arrangement that engages with perforated columns at optional heights; hence supporting the beam and restraining the column. There are a variety of types and …
-
Glass Fiber Reinforced Polymer Bars as the Top Mat Reinforcement for Bridge Decks
… program included 47 tensile tests and 42 beam end bond tests performed with FRP bars. Tensile strength of the bars from the tensile testing ranged from 529 MPa to 859 MPa. The average modulus, taken from all the testing, for each type of bar was found to range from 40 GPa to 43.7 GPa. The …
-
Bond of Corroded Reinforcement in Partial Depth Repairs in Reinforced Concrete Elements
… reinforced polymer (FRP) sheets. Thirty-six beam-end specimens and twenty-four lap splice beams were cast and tested under static loading. The beam-end dimensions were 600 mm in length, 500 mm in height and 250 mm in width and reinforced with 20M bar. The test variables considered for the …
-
Pretensioned box beams : prestress transfer and shear behavior
Pretensioned concrete box beams have been used in highway bridges for more than half a century. Due to their geometry, they have often been used as a viable alternative to the classic I-shaped girders. Box beams are highly effective in cases where speed of construction is a priority. However, the …
-
Repair of damaged prestressed concrete bridge girders using cementitious materials
… States. These girders often face damage at the beam-ends caused by corrosion from water and contaminants from the roadways above. In this project, alternative methods for the repair of the beam-end region are studied through small and large-scale laboratory testing, as well as numerical …
-
Behavior of beam shear connections in steel buildings subject to fire
… investigations on the behavior of steel simple beam end framing connections subjected to fire. While significant progress has been made in understanding the overall structural response of steel buildings subject to fire, the behavior of connections under fire conditions is not well understood. …
-
Nonlinear dynamic finite element analysis of steel frames with semirigid joints.
… This element has two nodes, one connected to the beam end, and the other to the column end. Its hysteresis behavior, under cyclic loads, is expressed by a moment-rotation relationship.
-
BOND BEHAVIOUR OF GFRP BARS EMBEDDED IN ALKALI ACTIVATED CEMENT CONCRETE
… cement (AAC) concrete, an environmentally friendly alternative to OPC concrete, stand out as ideal replacement materials. Different aspects of their individual properties have already been studied and their great potential has been reported. However, not much has been done on their bond …
-
Micromachining of silicon using ion beams and electrochemical etching
… high aspect ratio needles is studied here.Ion beam irradiation of a silicon sample is combined with Porous Silicon formation. The irradiation of protons or helium ions induces damage in the sample crystal proportionaly to the irradiation dose. These defects will alter the process of …
-
Direct study of quantum statistics in a degenerate Bose gas
… pair of elongated Hermite-Gaussian TEM01 mode beams supplemented by Gaussian beam end-caps producing a “particle-in-a-box” type geometry. Single atom detection with nearly unit quantum efficiency has been demonstrated and is fully integrated with the new trap. Using this system, we have …
-
Bond Behavior of Fiber Reinforced Polymer Bars Under Hinged Beam Conditions
… embedded in normal weight concrete (NWC) hinged beam-end specimens, tested in accordance with two laboratory conditions. Reinforcing bars of different diameter, material configuration, and finished surface preparation were tested for bond strength parameters determined in accordance with ACI …
-
Characteristics of Reinforced Concrete Bond at High Strain Rates
… construction and testing of fourteen flexural beam-end bond specimens and twenty-five lap-spliced reinforced concrete beams. The physical and material properties of the specimens were selected based on a range of design parameters known to significantly influence bond strength. In order to …
-
The Influence of Semi-Rigid Connections on the Behaviour of Beam and Column Structural System
… racking system consists of three main parts: beams, uprights and the beam end connectors which provide semi-rigid connections between the beams and the uprights. The connections in storage systems are often boltless tabs. These tabs are engaged into perforations in the cold-formed upright …
-
Bursting and spalling in pretensioned U-beams
… the tensile stresses that develop in the end regions of pretensioned concrete U-beams at transfer of prestress. Understanding the effect of these “bursting” and “spalling” stresses is essential in order to design standard details that might lead to reliably-serviceable end regions. Two …
-
Colheita de energia de vibração a partir de sistemas inteligentes e adaptativos utilizando interações magnéticas
… harvesting device composed by a cantilever beam with basis excitation that represents the energy source of external vibration. The system has a magnet at the beam end that interacts with other three magnets. The system adaptability is associated with a degree of freedom of one of the three …
-
Bond behaviour of commercially produced structural concrete from recycled coarse and fine aggregates
… concrete and deformed steel rebars. Seventy beam-end specimens were tested using the ASTM A944-15, where five critical variables affecting bond behaviour, such as cover, bond length, bar size, bar position, and transverse reinforcement were investigated. For the five variables investigated, …
-
Reinforced concrete beam-column joints strengthened in shear with embedded bars
Beam-column (BC) joints play an important role in the seismic performance of moment-resisting reinforced concrete (RC) frame structures. Without adequate joint shear reinforcement, BC joints can be the most vulnerable elements during an earthquake. Several techniques for improving the seismic …
-
Experimental Verification of a New Single Plate Shear Connection Design Model
… the shear force and moment transferred from the beam. The connections must also provide sufficient ductility to allow the beam end to rotate freely. In the United States the current recommended design method is found in the AISC 13th Edition Steel Construction Manual (2005b). The limited …
Page 1 of 2