Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 7216 for “"Beams"”.
-
Shear Behavior of Reinforced Concrete Beams and Prestressed Concrete Beams
"In the last decades, developments in high-strength concrete materials are rapid, but codes of practice still limits the concrete compressive strength in design of concrete structures due to a lack of experimental research data. As an effort to overcome the limitation to the use of high strength …
-
Freely vibrating beams
An operator based formulation is used to show the completeness of the eigenvectors of a non-uniform, axially loaded, transversely vibrating Euler-Bernoulli beam having eccentric masses and supported by off-set linear springs. This result generalizes the classical expansion theorem for a beam having …
-
Accelerating Optical Airy Beams
… dynamics of non-spreading optical Airy beams in both one- and two-dimensional configurations. We show that this class of finite energy waves can retain their intensity features over several diffraction lengths. The possibility of other physical realizations involving spatio-temporal Airy …
-
Software-defined structured beams
… patterns; we refer to such waves as structured beams. It has been shown previously that this additional structure provides additional degrees of freedom in communications, imaging, and radar, allowing for higher data rates, finer resolution, greater range, and more. However, making use of …
-
Angularly accelerating optical beams
… is focused on the theoretical study of light beams that twist as they propagate. By introducing novel design approaches we have introduced a new family of structured light, referred to as Tornado Waves (ToWs), that abruptly autofocus while twisting in an accelerating fashion. Using numerical …
-
Monte Carlo investigations of radiotherapy beams: studies of conventional, stereotactic and unflattened beams
Monte Carlo modelling is a useful method of investigating the electron and photon transport in radiotherapy linear accelerators. The probability of interactions of the materials stored in the cross-section library is considered to be theoretically accurate. Calculations made by Monte Carlo …
-
The influence of secondary effects on beams on elastic foundations and vibrating beams
… the influence of secondary effects for beams resting on elastic foundations and vibrating beams. Two problems have been presented for beams on elastic foundations and a general comparison has been made for an infinite vibrating beam.
-
Elastic slowing of supersonic beams
In this thesis we describe a new method of producing an intense, cold beam of slow noble gas atoms. A beam produced by a pulsed cryogenic supersonic nozzle is reflected from a single crystal atom mirror mounted on the tip of a spinning rotor. Simulations show that fluxes of 10¹¹ He atoms per second …
-
“Applications of Coherent Electron Beams
<p>The use of coherent beams for interferometric measurements has gained great popularity in light optics over the last several decades. The availability of coherent electron sources has now opened the door to apply the concept of holographic imaging in many new areas. Off-axis holograms can now be …
-
Design of prestressed composite beams
… of six externally prestressed composite beams, 3 simply supported on three supports and subjected to a two-point load while 3 simply-supported on two supports subjected to two-point and four-point load.The first configuration of continuous composite beams considered is nine metres long, …
-
Lateral stability of rectangular beams
This thesis presents a method for finding the lateral buckling load of a straight beam loaded perpendicular to its longitudinal axis with loads applied at any eccentricity. The beam can be restrained at any number of points along its length against deflections and rotations. The beam is divided …
-
Energy measurement of pion beams
Pion energies between 30 MeV and 60 MeV have been determined by three methods: magnetic field, range and time of flight. The pion energy was measured to an accuracy 2 # by range and 5 % by the time of flight, and the three methods were consistant with one another. The pions which were used were …
-
Impact loading of timber beams
… up our knowledge about impact loading of timber beams. The investigation was focused on failure modes and failure stresses. The static tests were conducted using both deformation and load controlled regimes at three different loading rates in a MTS test machine. The single blow impact tests were …
-
Crashworthiness of Side Impact Beams
… out into the crashworthiness of side impact beams. Two specific beams were investigated: a commercially used steel beam and a prospective composite beam made from a glass fibre weave within a polypropylene matrix. The components were simply supported and were subjected to quasi-static and …
-
Structured Beams as Quantum Probes
… and the characterization of coherence of neutron beams. The last focus of the thesis is to describe matter wave and optical spin correlated OAM (spin-orbit) states. Methods to prepare neutron spin-orbit states via special geometries of magnetic fields are proposed. The preparation, entanglement …
-
Smart cantilever beams for nanomanipulation
A smart micro cantilever beam, consisting of an atomic force microscope probe bonded with a piezoelectric actuator, is proposed to enhance the ability of mechanical nanomanipulation. A precise three-section Euler-Bernoulli beam model is developed to describe the dynamics of the beam. The forced …
-
Torsional behavior of spandrel beams
… load transfer from the slab through the spandrel beams (edge beams) to the exterior columns in flat plate construction. The load is transferred from the slab to the spandrel beam through a combination of shear and bending forces. The spandrel beam in turn transfers the load to the exterior column …
Page 1 of 361