Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 29 for “"Bearing steels"”.

  1. Machinability of 100Cr6 bearing steels

    … on tool wear evolution when machining 100Cr6 bearing steel using coated carbides. Furthermore, a secondary aim is to investigate the performance of coated tool grades coated with different combinations of titanium carbonitride and alumina when used to machine 100Cr6. Tool life tests under …

    chalmers Repository record for Machinability of 100Cr6 bearing steels (opens in a new tab)

  2. Thermochemical treatment of bearing steels

    Bearings are applied to provide frictionless movements and to withstand the applied load. The critical part of the bearings is the surface which determines the bearing life. The surface mechanical properties like hardness and microstructural features play a major role in that. These surface …

    chalmers Repository record for Thermochemical treatment of bearing steels (opens in a new tab)

  3. The plasma nutriding of tool and bearing steels

    … some evidence to suggest that nitriding of alloy steels, in particular high speed tool steels, under carefully controlled conditions might sharply increase rolling contact fatigue resistance. However, the subsurface shear stresses developed in aerospace bearing applications tend to occur at depths …

    aston Download PDF for The plasma nutriding of tool and bearing steels (opens in a new tab)

  4. Heat treatment optimization of through-hardening bearing steels

    … or creating new heat treatment recipes for large bearings, more data is needed. The purpose of the study was to evaluate the current heat treatment recipes with the help of a hand held pyrometer. Twelve inner rings and ten outer rings of a large spherical roller bearing made from the through …

    chalmers Repository record for Heat treatment optimization of through-hardening bearing steels (opens in a new tab)

  5. Cyclic Nano-indentation Investigation of Plasticity in Case Hardened Bearing Steels

    Demands for performance and reliability of bearings present a challenge for materials and process development in that a knowledge gap exists between the understanding ratcheting mechanisms that lead to crack initiation and mechanical predictions of bearing endurance. Current bearing research …

    purdue-thes Repository record for Cyclic Nano-indentation Investigation of Plasticity in Case Hardened Bearing Steels (opens in a new tab)

  6. Influence of microstructure in rolling contact fatigue of bearing steels with inclusions

    The use of bearings can be found in virtually all aspects of mechanical systems today. Reliability of these critical components is an important issue. Fatigue performance of bearings is a function of many factors, including service conditions, loading, material properties, environmental factors, …

    gatech Repository record for Influence of microstructure in rolling contact fatigue of bearing steels with inclusions (opens in a new tab)

  7. Further understanding of dark etching region and white etching bands development in bearing steels due to rolling contact fatigue

    Rolling-element bearings undergo rolling contact fatigue (RCF) due to the cyclic loading they experience throughout operation, which leads eventually to failures due to surface or subsurface initiated cracking. During the life of rolling-element bearings, bearing steels experience a number of …

    soton Download PDF for Further understanding of dark etching region and white etching bands development in bearing steels due to rolling contact fatigue (opens in a new tab)

  8. Analysis of the Tribological Behaviour of Stainless and Ball Bearing Steels Sliding in the Presence of Sulphur Extreme-Pressure Additives

    … The tribological behaviour of stainless and ball bearing steel were studied under extreme pressure and/or anti-wear lubrication conditions in the presence of sulphur and sulphur containing additives, in order to compare the wear behaviour of the AISI 420 stainless steel with the SAE 52100 steel, …

    aston Repository record for Analysis of the Tribological Behaviour of Stainless and Ball Bearing Steels Sliding in the Presence of Sulphur Extreme-Pressure Additives (opens in a new tab) Download PDF for Analysis of the Tribological Behaviour of Stainless and Ball Bearing Steels Sliding in the Presence of Sulphur Extreme-Pressure Additives (opens in a new tab)

  9. The Influence of Heat Treatment on Corrosion Behavior of Martensitic Stainless Steel UNS 42670

    … been one of the greatest driving forces behind bearing steel innovations. Recent studies demonstrate that corrosion is one of the leading causes of bearing failure in both military and commercial aircraft. High-performing bearing steels are available but are not being used in US military …

    boise Repository record for The Influence of Heat Treatment on Corrosion Behavior of Martensitic Stainless Steel UNS 42670 (opens in a new tab)

  10. Mechanisms for White Etching Matter formation under rolling contact loading

    … cracks and debonded non-metallic inclusions in bearing steels. WEM is nanocrystalline, compared to the coarse-grained matrix of bearing steels. As WEM is commonly found in prematurely failed bearings, it is hypothesized that the WEM accelerates bearing failures. The current qualitative …

    gatech Repository record for Mechanisms for White Etching Matter formation under rolling contact loading (opens in a new tab)

  11. Nonmetallic inclusion modification and its effect on the final properties of a linepipe steel

    Five linepipe type steels were produced in order to study the effect of calcium and magnesium injection on their final properties. Two of these steels were at the extremes of the sulphide range i.e. 0.003 and 0.017% sulphur with no injection attempted; thereby, providing standards to compare with …

    aston Download PDF for Nonmetallic inclusion modification and its effect on the final properties of a linepipe steel (opens in a new tab)

  12. Processing, Structure, and Tribological Property Interrelationships in Sputtered Nanocrystalline ZnO Coatings

    … assembly applications, such as orthopedics and bearing steels. Nanocrystalline ZnO coatings with a layered wurtzite crystal structure have the potential to function as a lubricious material by its defective structure which is controlled by sputter deposition. The interrelationships between …

    unt Repository record for Processing, Structure, and Tribological Property Interrelationships in Sputtered Nanocrystalline ZnO Coatings (opens in a new tab)

  13. ΕΠΙΔΡΑΣΗ ΤΗΣ ΠΑΡΟΥΣΙΑΣ ΤΟΥ ΧΑΛΚΟΥ ΣΤΟΝ ΠΕΡΛΙΤΙΚΟ ΚΑΙ ΜΠΑΙΝΙΤΙΚΟ ΜΕΤΑΣΧΗΜΑΤΙΣΜΟ ΤΩΝ ΧΑΛΥΒΩΝ

    … BAINITE OR PEARLITE WAS INVESTIGATED, IN COPPER BEARING STEELS, TO GAIN A BETTER UNDERSTANDING OF ROW COMMONSUBSTITUTIONAL SOLUTES INFLUENCE PEARLITIC TRANSFORMATION IT WAS FOUND THAT PRECIPITATES BELONGING TO THE PHASE E-CU EXISTED WITHIN THE PROEUTECTOID PHASES EITHER THE PROEUTECTOID CEMENTITE …

    greece Repository record for ΕΠΙΔΡΑΣΗ ΤΗΣ ΠΑΡΟΥΣΙΑΣ ΤΟΥ ΧΑΛΚΟΥ ΣΤΟΝ ΠΕΡΛΙΤΙΚΟ ΚΑΙ ΜΠΑΙΝΙΤΙΚΟ ΜΕΤΑΣΧΗΜΑΤΙΣΜΟ ΤΩΝ ΧΑΛΥΒΩΝ (opens in a new tab)

  14. Impact of hard-turning parameters on the surface integrity of hybrid 60 steel

    … the typical white layers observed in hard-turned bearing steels. Interestingly, this thin layer was absent in sample A, which instead showed severe plastic deformation. This variation underscores the influence of different cutting parameters on the material's surface integrity. These findings …

    chalmers Repository record for Impact of hard-turning parameters on the surface integrity of hybrid 60 steel (opens in a new tab)

  15. Simple quantum-mechanical models for defects in titanium and iron—how far can they take us?

    … carbon migration, as theorised in bearing steels. This was achieved by a multi-scale modelling approach, involving a line-tension model, which was parameterised on tight-binding simulations of the 2d Peierls potential exhibited in bcc iron, and carbon-dislocation interactions. This …

    kings Repository record for Simple quantum-mechanical models for defects in titanium and iron—how far can they take us? (opens in a new tab) Embargoed until 2030-11-01

  16. The effect of Cu on phase transformation kinetics in low-carbon steels

    … Cu. Currently, high strength low alloy (HSLA) steels containing Cu are used for specific applications, e.g. shipbuilding, and pipelines in Arctic environments, due to their high strength and corrosion resistance as compared to ordinary HSLA steels. Processing of Cu-bearing steels to produce …

    ubc Repository record for The effect of Cu on phase transformation kinetics in low-carbon steels (opens in a new tab) Download PDF for The effect of Cu on phase transformation kinetics in low-carbon steels (opens in a new tab)

  17. Printability and Phase Transformation of Selected Alloys Additively Manufactured By Laser Powder Bed Fusion

    … to produce gas-atomized powders of carbon-bearing steels and eutectic multi-principal element alloys (EMPEAs). The compositions of the carbon-bearing alloys were modulated to yield either austenite or martensite in the as-printed condition to understand the printability and evaluate the …

    ucf Repository record for Printability and Phase Transformation of Selected Alloys Additively Manufactured By Laser Powder Bed Fusion (opens in a new tab)

Page 1 of 2