Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 14 of 14 for “"Belt Filter"”.
-
Municipal sludge dewatering using a belt filter press
… determine the optimum polymer conditioning for a belt filter press The optimum polymer dosages for all three zones of a belt filter press were compared with each other to determine the best overall conditioning. The requirements of all three zones of a belt filter press were the same. However, the …
-
Polymer dose prediction for sludge dewatering with a belt filter press
… mixing requirements for sludge dewatering with a belt filter press. This involved correlating full-scale field studies to small scale laboratory testing. Bench testing involved the use of a high-speed mixer and two sludge dewatering response tests: the capillary suction time test and the time-to …
-
An experimental investigation of microalgal dewatering efficiency of a belt filter system
… cell size and dilute microalgal suspension. A belt filter system is preferred over other dewatering technologies as it has lower energy consumption. However, a microalgal feed concentration of 10 - 40 g dry wt. /L is required prior to dewatering on a belt filter system. The objective of this …
-
Laboratory evaluation of conditioning requirements for sludge dewatering using belt filter press
… polymer conditioning requirements for full-scale belt filter presses, and to determine the additional polymer demand exerted by applied pressure during the expression stage of a dewatering process. Bench-scale experiments performed with anaerobically digested, alum, and secondary sludges used a …
-
Design and Testing of a Hyperbaric Horizontal Belt Filter for Fine Coal Dewatering
… To meet this goal, a hyperbaric horizontal belt filter was designed and constructed over the course of 18 months. Once built, the filter was then thoroughly tested to determine operational capabilities. The test data showed that the lowest moisture content that could be achieved with a …
-
Predicting dewatering equipment performance from laboratory tests
… the dewatering characteristics of a bench-scale belt filter press and a full-scale screw press, and to develop a suitable bench-scale test to simulate dewatering in a full-scale screw press. Tests were conducted to determine the effect of pressure and shear on dewatering of anaerobically …
-
Optimizing dewatering polymer usage and resulting percent cake solids at the Hornsby Bend Biosolids Management Plant
… the conditioned sludge is then passed through a belt filter press for final dewatering. Recent data indicate that the final solids content of the sludge cake after dewatering (cake %TS) has fallen below CoA targets. The purpose of this research is to optimize the sludge conditioning process to …
-
Gravity Sedimentation: A One-Dimensional Numerical Model
… of the physics of dewatering units such as the belt filter press, based on laboratory determined sludge properties, would better predict dewatering performance. This research developed a numerical computer model of the physics of gravity sedimentation. The model simulated the gravity …
-
An investigation into an improved method of dewatering fine coal
… during a single dewatering cycle yielded a filter cake with a lower final moisture content. It was also demonstrated that the rate at which the coal is being dewatered is much higher than during continuous vacuum application. A further study of this phenomenon showed a twofold time …
-
Acid mine drainage: Sludge dewatering, metal recovery and synthesis of magnetite nanoparticles
… sludge. Sludge cakes with 6.2% solids and a filter yield of 3.04 kg/m2h were achieved by vacuum filtration. Additionally, a belt filter press showed a good performance in improving solids content of the sludge cake.;Simultaneous metal recovery and AMD treatment were achieved using a selective …
-
Investigating the Role of Various Environment and Process Conditions in Wastewater Sludge Odor Generation
… (VSCs) during storage. In this study, a belt filter press gave a higher production of sulfur and TMA odors compared to a vacuum filter for the same sludge, which is attributed to the shear imparted to sludge during the dewatering process. Preliming studies suggested incomplete mixing of …
-
Scale-up of Using Novel Dewatering Aids
… which creates relatively small capillaries in filter cakes and, thus, cause slower dewatering kinetics. As a result, dewatering costs for fine particles are much higher than for dewatering coarse particles. Considering the technical and economic issues associated with dewatering coal and …
-
Sustainability Assessment of Coupling a Rotating Biological Contactor with an Anaerobic Baffled Reactor for Municipal Wastewater Treatment
… ARB+RBC systems are due to solids management – belt filter press, anaerobic digestion and sludge disposal. Similar to economic costs, the ABR assembly was associated with lower social risk across the five social categories assessed in the Social Hotspot Database (SHDB) compared to the RBC+AD …
-
Advanced Chemical-Mechanical Dewatering of Fine Particles
… should decrease the capillary pressure in a filter cake, which should in turn increase the rate of dewatering and help reduce the cake moisture. The use of the novel dewatering aids causes a decrease in the surface tension of water and an increase in the porosity of the cake, both of which …