Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 44 for “"Bender Element"”.
-
Advancements in bender-element testing - frequency effects
… typically measured in laboratory mostly using a bender element system (BE) or a resonant column (RC) device. However, the operating frequency range of BEs (e.g. 1 to 15 kHz) and the RC (e.g. 20 to 220 Hz) are not representative of typical earthquake loads (e.g. 0.1 to 10 Hz). In addition, there …
-
Soil Moduli Obtained from a Back Pressure Constant Rate of Strain Bender Element Consolidation Apparatus
… consolidation device was modified to incorporate bender elements (BP-CRS-BE) and thus allowed for shear wave measurements during consolidation tests. This newly fabricated system has many advantages over other previous or current devices: 1) it can be utilized not only for laboratory prepared soil …
-
Development and application of bender element field sensor for pavement base/subbase modulus characterization and geogrid effectiveness evaluation
Submission published under a 24 month embargo labeled 'U of I Access', the embargo will last until 2025-12-01
-
LABORATORY AND NUMERICAL INVESTIGATION OF THE PERFORMANCE OF BENDER ELEMENTS IN CEMENT-TREATED CLAY
Bender element testing is commonly used to obtain the small-strain shear modulus of a soil from shear wave velocity measurements. The current study investigates the applicability of bender element testing to cement-treated clay of high stiffness. The interaction between the bender element and soil …
-
Investigations into the use of continuous shear wave measurements in geotechnical engineering
… of ageing of Fraser River Sand using a bender element triaxial apparatus. Shear wave propagation times from bender elements were interpreted using published time domain and frequency domain techniques. These techniques provided similar results, but the variability exceeded the effect of …
-
Excitation Force and Frequency Effects in Wave-Based Techniques for the Characterization of Geomaterials at Different Scales
… characteristics of the excitation in typical bender elements test are preventing practitioners and researchers from the correct interpretation of lab results and the understanding of the bender element – soil specimen interaction. Overcoming this challenge is needed to make reliable standards …
-
Proposed ASTM Standard for the Stokoe-type Resonant Column Torsional Shear Device
… were also compared with results obtained from bender element test performed on similar specimens at the same confining pressure. A only five (5) percent difference in shear wave velocities was observed between the bender element obtained values (178 m/s) and the resonant column obtained values …
-
The measurement and interpretation of small strain stiffness of soils
… while dynamic stiffnesses were measured using bender elements. Using the two methods good agreement was found between the stiffnesses at 0.0001% strain for two different materials. Bender elements measure the propagation time of shear waves through a soil sample so that the value of Gnax can be …
-
Experimental assessment of the instability locus in iron ore tailings: Influence of grading and stress paths
… compression tests, hollow cylinder tests, bender element tests, and resonant column tests. The experimental results demonstrated that both the critical state line (in the e-p′ and q-p′ planes) and the instability stress ratio are affected by fines content. This behaviour may be attributed …
-
Experimental Study of Mineralogy and Anisotropy Effects on the Small-Strain Dynamic Properties of Natural Sands
… in the testing program. Both resonant column and bender element tests have been conducted to understand the small-strain dynamic behaviour of natural granular materials in a better manner. Bender element signals have been interpreted in conjunction with resonant column measurements obtained from …
-
Shear wave velocity measurements of normally consolidated kaolinite using bender elements
… Shear wave velocities were measured using bender elements. Two different types of bender-element systems, embedded type and penetrating type, were designed and constructed based on the results of preliminary tests. The embedded type measurement system was permanently embedded and used to …
-
STRENGTH AND COMPRESSIBILITY BEHAVIOUR OF CEMENTED SANDY CLAY
… unconfined compressive strength (UCS) tests and bender element (BE) tests, it is shown that the binding water content, modified cement content and water-to-cement ratio are three parameters that play critical roles in defining the strength and small strain stiffness of cemented sandy clay.
-
SMALL STRAIN BEHAVIOUR OF CEMENT TREATED SINGAPORE MARINE CLAY
By conducting a series of bender element test, resonant column test, local strain test and unconfined compressive test, this study mainly advances the understanding of key parameters influencing small-strain shear modulus of cement-treated clay. The results show that: (i) Unconfined compressive …
-
Simulation of Wave Propagation in Granular Particles Using a Discrete Element Model
The understanding of Bender Element mechanism and utilization of Particle Flow Code (PFC) to simulate the seismic wave behavior is important to test the dynamic behavior of soil particles. Both discrete and finite element methods can be used to simulate wave behavior. However, Discrete Element …
-
Parâmetros geotécnicos estáticos e dinâmicos de areias quartzosa e carbonatadas
… dynamic parameters and the Resonant Column and Bender Elements tests are the most used. Laboratory tests were carried out encompassing the physicalchemical and mineralogical characterization, and strength tests, as well as the dynamic tests of the Resonant Column and the Bender Element tests. …
-
Evaluation of seismic site response of submarine clay canyon : centrifuge modeling
… was performed on each clay model with bender element and T-bar penetration tests prior to the application of seismic excitations. The present research proves that the topographic shape of the canyon can substantially affect peak values and the frequency content of the free-field motions …
-
Mechanical characteristics of organically modified fly ash-kaolinite mixtures
… self-developed floating wall-type consolidometer bender element testing system. Vs results showed that PEO and chitosan increased Vs of the fly ash-kaolinite mixtures, while xanthan gum decreased Vs. Vs anisotropy of the fly ash-kaolinite mixtures was decreased by the addition of polymers. …
-
Experimental investigation of the behavior of mixtures with granular soil and low weight materials
… of the mixtures were investigated using bender element tests and resonant column tests. Bender element testing provided measurements of shear wave velocity and primary wave velocity at very small strain levels, revealing a systematic decrease in shear wave velocity with increasing rubber …
-
Bio-inspired geomaterial improvement and development of innovative characterization methods
… -- spectral induced polarization (SIP) and bender element were used to monitor the precipitation process and shear wave velocities (Vs). SIP, Vs, and SEM results all suggest contact cementation as the preferential precipitation pattern of calcite. Secondly, a series of sedimentation tests …
-
Liquefaction of sand-tyre chip mixtures.
… triaxial system which was modified to house bender elements for measuring the shear wave velocity and small strain shear modulus. In addition, the behaviour of the mixtures under monotonic loading conditions was studied using a standard triaxial apparatus with pore water pressure measurements …
Page 1 of 3