Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 55 for “"Bending Modulus"”.

  1. Bending Modulus and Transversal Flexoelectric Coefficient of MXene Monolayers

    … primary focus was on the mechanical response of bending MXene layers, specifically calculating the bending modulus and flexoelectric coefficient. To achieve this, we employed density functional theory to determine the lattice constant of flat MXene sheets and density functional theory with cyclic …

    gatech Repository record for Bending Modulus and Transversal Flexoelectric Coefficient of MXene Monolayers (opens in a new tab)

  2. Using Non-Destructive Testing to Predict Bending Modulus of Carbon Infiltrated-Carbon Nanotubes

    Fabrication of carbon infiltrated carbon nanotubes (CI-CNT) can result in large mechanical property variation, and methods to characterize properties usually involve destructive testing. Finding a non-destructive way to test for stiffness of this material reduces the number of parts that have to be …

    byu Repository record for Using Non-Destructive Testing to Predict Bending Modulus of Carbon Infiltrated-Carbon Nanotubes (opens in a new tab) Download PDF for Using Non-Destructive Testing to Predict Bending Modulus of Carbon Infiltrated-Carbon Nanotubes (opens in a new tab)

  3. Bending of atomic monolayers from first principles

    … response of two-dimensional monolayers to the bending deformation. Specifically, we calculate the bending modulus and the flexoelectric coefficient of a number of representative monolayers by using first-principles density functional theory simulations. We have calculated the bending modulus …

    gatech Repository record for Bending of atomic monolayers from first principles (opens in a new tab)

  4. A study of the fundamental factors that affect seam strength.

    … stiffness of the fabrics, Pierce's cantilever bending method was used. From the bending strength, the bending modulus was computed and it was this figure that was used as a measure of the stiffness of the fabric. Seams were made from these fabric samples and they were all sewed under the same …

    nps Repository record for A study of the fundamental factors that affect seam strength. (opens in a new tab)

  5. Fabrication and Dynamic Mechanical Analysis of Hydroxyapatite Nanoparticle /Gelatin Porous Scaffolds

    … revealed that the scaffolds achieved maximum bending and tensile moduli up to 1.28 GPa and 1.5 GPa, respectively, when nanoHA loading was around 30 % by weight. The bending modulus increases by a factor of 1.6, while the Tension modulus increased by a factor of 0.8 after the cross-linking of …

    uab Repository record for Fabrication and Dynamic Mechanical Analysis of Hydroxyapatite Nanoparticle /Gelatin Porous Scaffolds (opens in a new tab)

  6. Surface modification of hemp fiber to improve spinning properties

    … length variation, single fiber entity, fineness, bending modulus and softness by removing non-cellulosic materials from hemp. Different chemical and enzyme treatments were employed to improve the selected spinning properties of hemp fiber. It was found that bleaching at 95°C for 240 min (min) …

    manitoba Repository record for Surface modification of hemp fiber to improve spinning properties (opens in a new tab)

  7. Behavior and Flexure Analysis of Balsa Wood Core Sandwich Composites: Experimental, Analytical and Finite Element Approaches

    … available sandwich plates in three-point bending with glass phenolic facings and balsa wood core is being investigated under room and elevated temperatures. Test data on bending rigidity, critical interfacial failure (skin-to-core interface) and shear stress are collected and analyzed. The …

    uno Repository record for Behavior and Flexure Analysis of Balsa Wood Core Sandwich Composites: Experimental, Analytical and Finite Element Approaches (opens in a new tab)

  8. Changes in wood-flake properties in relation to heat, moisture, and pressure during flakeboard manufacture

    … and post-pressing thickness and specific dynamic bending modulus values were determined and compared with respect to changes in pressing parameters. Platen temperature, initial mat moisture content, and test flake location within the mat were all involved in significant two-way interactions in …

    vt Repository record for Changes in wood-flake properties in relation to heat, moisture, and pressure during flakeboard manufacture (opens in a new tab)

  9. Tri-layer tissue engineering heart valve based on collagen, elastin and hyaluronic acid

    … reduce scaffold stiffness in the self-deflection bending test.</p> <br> <p>Two designs of tri-layer scaffolds resembling the natural heart valve structurally were subsequently fabricated, with smooth interlayer transition and no visible sign of structure delamination. The average pore size ranging …

    oxford Repository record for Tri-layer tissue engineering heart valve based on collagen, elastin and hyaluronic acid (opens in a new tab)

  10. Remodeling of the annulus fibrosus : orientational ordering in 2D polymeric networks on curved substrates

    … discrete persistent chain consist of spring- and bending energy. To study the development of the annulus fibrosus we developed a code which simulates polymeric networks on the surface of a cylinder. The simulation starts with a network of randomly placed fibers. The results of the simulations show …

    eindhoven Repository record for Remodeling of the annulus fibrosus : orientational ordering in 2D polymeric networks on curved substrates (opens in a new tab) Download PDF for Remodeling of the annulus fibrosus : orientational ordering in 2D polymeric networks on curved substrates (opens in a new tab)

  11. Collagen-based scaffolds for heart valve tissue engineering

    … scaffolds had tensile, compressive and effective bending moduli ranging from 39.8kPa to 1082kPa, from 2.4kPa to 213.9kPa, and from 11.0kPa to 415.8kPa, respectively. The different behaviours of the wall stretching and the wall buckling in the individual pores of the scaffolds contributed to the …

    oxford Repository record for Collagen-based scaffolds for heart valve tissue engineering (opens in a new tab)

  12. Structure and Properties of Nanomaterials: From Inorganic Boron Nitride Nanotubes to the Calcareous Biomineralized Tubes of H. dianthus

    … multiwall boron nitride nanotubes (MWBNNTs). The bending modulus of individual MWBNNTs was determined using an AFM three-point bending technique, and was found to be diameter-dependent due to the presence of shear effects. The second type of nanomaterial investigated is the biomineralized …

    toronto-retro Repository record for Structure and Properties of Nanomaterials: From Inorganic Boron Nitride Nanotubes to the Calcareous Biomineralized Tubes of H. dianthus (opens in a new tab)

  13. Alginate Microbeads and Ethyl Cellulose Thin Film Capsule Formation via Electrohydrodynamic Processes

    … the capsules revealed that the thin EC thin film bending modulus significantly (p < 0.05) reduced when pH levels of water droplets were adjusted above and below 7. The results from this research offer phenomenal insights into alginate beads and EC capsule formation during the electrohydrodynamic …

    guelph Repository record for Alginate Microbeads and Ethyl Cellulose Thin Film Capsule Formation via Electrohydrodynamic Processes (opens in a new tab)

  14. Comparative Analysis of Additive Manufactured Injection Molding Tools

    … and HI-TEMP 300 AMB tools were used. The tangent bending modulus decreased by 17% when the AM mold tools were used. Shrinkage of the parts made by the ULTEM 1010 and HI-TEMP 300 AMB mold tools increased by 2.2% and 2.9% respectively. The AM mold tools used for PP injection molding can be used in …

    umn Repository record for Comparative Analysis of Additive Manufactured Injection Molding Tools (opens in a new tab)

  15. Computational study of structural and mechanical properties of two-dimensional nanomaterials and their derivatives

    … propose an approach for determining the Gaussian bending modulus of graphene by utilizing carbon torus, whose topology enables its bending energy to be extracted from the coupled in-plane strain energy. Furthermore, we report a unique method to locally determine the mechanical response of …

    rice Repository record for Computational study of structural and mechanical properties of two-dimensional nanomaterials and their derivatives (opens in a new tab)

  16. Enhanced heavy oil recovery by hybrid thermal-chemical processes

    … and temperature only modify the saddle-splay modulus (k ̅) and bending modulus (k) respectively, whereas co-solvent changes both moduli. The observed rheological behavior agrees with our findings. To describe the behavior of microemulsions in flow simulations, a rheological model was …

    texas Repository record for Enhanced heavy oil recovery by hybrid thermal-chemical processes (opens in a new tab)

  17. The Interaction of Nonlinear Deformation and Electrostatics with Applications for Designing New Materials and Explaining Natural Phenomena

    … quantities, including membrane thickness, bending modulus, electromechanical properties, and geometrical features, among others. Using the two-tone interference problem as a proxy for musical perception, our model allows us to establish the basis for exploring the effect of external factors …

    houston Repository record for The Interaction of Nonlinear Deformation and Electrostatics with Applications for Designing New Materials and Explaining Natural Phenomena (opens in a new tab)

  18. The role of water in determining structure and function of macromolecules and macromolecular assemblies /

    … Neither lysolipid significantly affected the bending modulus of the monolayer in which it was incorporated. The second study examines the role of water in theprocess of polymerization of actin into filaments. Water activity was manipulated by adding osmolytes and the effect on the equilibrium …

    brock Repository record for The role of water in determining structure and function of macromolecules and macromolecular assemblies / (opens in a new tab)

  19. CHARACTERIZING LIQUID-ORDERED AND LIQUID-DISORDERED PHASE PROPERTIES AND INTERFACES

    … Thus both the line tension and membrane bending rigidity are important quantities for understanding “raft” behavior. Mixtures of high-melting lipid, low-melting lipid(s), and cholesterol exhibit a region of liquid-ordered (Lo) + liquid-disordered (Ld) phase coexistence analogous to raft + …

    cornell Repository record for CHARACTERIZING LIQUID-ORDERED AND LIQUID-DISORDERED PHASE PROPERTIES AND INTERFACES (opens in a new tab)

Page 1 of 3