Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 40 for “"Bi-component"”.

  1. Characterization Of Island-In-The-Sea Bi-Component Nylon/Polyethylene Terephthalate Fibers Using Atomic Force Acoustic Microscopy

    … has been proven to be very useful for its ability to detect material properties at the nanoscale without sample damage. The following project has proven that the Atomic Force Acoustic Microscopy technique can be used on soft materials such as fibers. The nylon/polyethylene terephthalate …

    cornell Repository record for Characterization Of Island-In-The-Sea Bi-Component Nylon/Polyethylene Terephthalate Fibers Using Atomic Force Acoustic Microscopy (opens in a new tab)

  2. Magneto-transport, Magneto-optical and Dynamic Properties of Ferromagnetic Nanostructures

    … of Co/Pd multilayer based nanostructures and bi-component magnonic crystals (MCs) is presented. Co/Pd multilayer based nanostructures including nanodots, nanorings and nanowires were fabricated over large area. The magnetization reversal and magnetoresistance behaviors of the Co/Pd …

    nus Repository record for Magneto-transport, Magneto-optical and Dynamic Properties of Ferromagnetic Nanostructures (opens in a new tab) Download file for Magneto-transport, Magneto-optical and Dynamic Properties of Ferromagnetic Nanostructures (opens in a new tab)

  3. Polyacrylonitrile/carbon nanotube composite fibers: reinforcement efficiency and carbonization studies

    … solution spinning, gel spinning, and bi-component gel spinning. The detailed characterization exhibited that the smaller and longer CNT will reinforce polymer matrix mostly in tensile strength and modulus, respectively. Gel spinning combined with CNT also showed the promising potential …

    gatech Repository record for Polyacrylonitrile/carbon nanotube composite fibers: reinforcement efficiency and carbonization studies (opens in a new tab)

  4. Polymer Materials Via Melt Based 3D Printing: Fabrication and Characterization

    … various areas, such as automotive, aerospace and bio-engineering to mention a few. However, a number of serious challenges with the 3D printing fabrication have been found such as lower mechanical characteristics, relatively high surface roughness and anisotropy in mechanical and physical …

    clemson Repository record for Polymer Materials Via Melt Based 3D Printing: Fabrication and Characterization (opens in a new tab)

  5. SPIN WAVES IN MAGNETIC NANOSTRUCTURES

    … are of technological importance as they exhibit bandgaps for spin waves similar to what photonic crystals do for electromagnetic waves. A particular example is a one-dimensional array comprising submicron-wide stripes made of two alternating ferromagnetic materials. This bi-component MC …

    nus Repository record for SPIN WAVES IN MAGNETIC NANOSTRUCTURES (opens in a new tab) Download file for SPIN WAVES IN MAGNETIC NANOSTRUCTURES (opens in a new tab)

  6. Magnetization reversal and dynamic behaviour of patterned ferromagnetic nanostructures

    … technique for making a range of self-aligned bi-component and thickness-modulated nanostructures is presented. Unique magnetic behavior of the resulting bi-component (Ni80Fe20/Fe) nanostructures was described and modeled. Thirdly, vortex dynamics in thickness-modulated Ni80Fe20 disk was …

    nus Repository record for Magnetization reversal and dynamic behaviour of patterned ferromagnetic nanostructures (opens in a new tab) Download file for Magnetization reversal and dynamic behaviour of patterned ferromagnetic nanostructures (opens in a new tab)

  7. Multi-functional PAN based composite fibers

    … thermal, or magnetic properties can be combined with original polymer characteristics, including flexible, light weight, and ease of use. These composites can be used to produce multi-functional fibers as the next generation textile or fabrics. In this research, Polyacrylonitrile (PAN) is …

    gatech Repository record for Multi-functional PAN based composite fibers (opens in a new tab)

  8. Gel spun polyacrylonitrile based carbon fibers containing lignin and carbon nanotubes

    Forestry bioproduct lignin has been long proposed as an ideal material for carbon fiber precursor due to its abundance, renewability, high carbon yield and cost-effectiveness as the biorefinery by-product. However, little success of lignin based commercial carbon fibers had been reported due to the …

    gatech Repository record for Gel spun polyacrylonitrile based carbon fibers containing lignin and carbon nanotubes (opens in a new tab)

  9. An Investigation of Environmentally Persistent Free Radical (EPFR) Formation in Contaminated Soils Using Surrogate-Based Model Systems

    … matrix that can be described as a tri-component system consisting of the clay/mineral, organic, and the biological components. Our previous studies on EPFR-contaminated Superfund soil sites utilized a “top-down” approach to reduce the soil matrix into its constituting components in …

    lsu-thes Repository record for An Investigation of Environmentally Persistent Free Radical (EPFR) Formation in Contaminated Soils Using Surrogate-Based Model Systems (opens in a new tab)

  10. Influence of Material Variables in Thermal Bonding of Nonwovens

    … studies were also done with several sheath-core bi-component fibers.</p> <p>Fiber bond strength results were similar to results observed in case of films with respect to bonding temperatures studied. Carded webs were prepared from polypro- pylene and other bi-component fibers. Effect of bonding …

    ut-knoxville Repository record for Influence of Material Variables in Thermal Bonding of Nonwovens (opens in a new tab)

  11. Novel Magnonic Crystals and Devices: Fabrication, Static and Dynamic Behaviors

    … various types of MCs is presented. 1-D, 2-D and binary MCs with different configurations were fabricated and systematically investigated using a combination of broadband ferromagnetic resonance spectroscopy, Magneto-Optical Kerr effect and magnetic force microscopy. A ?self-aligned shadow …

    nus Repository record for Novel Magnonic Crystals and Devices: Fabrication, Static and Dynamic Behaviors (opens in a new tab) Download file for Novel Magnonic Crystals and Devices: Fabrication, Static and Dynamic Behaviors (opens in a new tab)

  12. Development and Characterization of Polytrimethylene Terephthalate (PTT) Based Mono- and Bicomponent Meltblown Nonwovens

    <p>Mono and Bi-component polytrimethylene terephthalate (PTT) based meltblown fiber webs were developed on the Reicofil<sup>&reg;</sup> side-by-side bi-component meltblown line at Textiles and Nonwovens Development Center (TANDEC) located on the campus of University of Tennessee, Knoxville. Main …

    ut-knoxville Repository record for Development and Characterization of Polytrimethylene Terephthalate (PTT) Based Mono- and Bicomponent Meltblown Nonwovens (opens in a new tab)

  13. PRODUCTION AND CHARACTERIZATION OF NOVEL AIR FILTRATION MEDIA

    … grooves of the shaped fibers, they did not exhibit HEPA quality efficiencies. The pressure drop of these filters was low as compared to currently used M98 HEPA filters. This was potentially due to the CCPTM fibers being unable to pack as closely together as round glass fibers allowing for high …

    clemson Repository record for PRODUCTION AND CHARACTERIZATION OF NOVEL AIR FILTRATION MEDIA (opens in a new tab)

  14. Development of bi- and multicomponent fibres for tissue engineering by electrospinning

    This project investigated the possibility of tailoring the crystallinity of electrospun fibres (crystallinity studies), and the electrospinning of bi- and multicomponent scaffolds of PLLA. During the crystallinity studies, the effects of various electrospinning process parameters on the …

    birmingham Download PDF for Development of bi- and multicomponent fibres for tissue engineering by electrospinning (opens in a new tab)

  15. Microstructures and multifunctional microsystems based on highly crosslinked polymers

    … A novel paradigm of surface coatings, single and bi-component periodic, porous crosslinked polymeric structures, has been introduced and thoroughly studied. Surface, interfacial, and mechanical properties of these novel class crosslinked polymer coatings clearly demonstrate the enormous potential …

    gatech Repository record for Microstructures and multifunctional microsystems based on highly crosslinked polymers (opens in a new tab)

  16. FABRICATION OF FLUORESCENT NANOPARTICLE-POLYMER COMPOSITES FOR PHOTOACTIVE-BASED MATERIALS

    … in the visible to near-infrared range. Terbium ions were added to a LaF3 crystal because of their distinct visible green (545 nm) emissions. Organic ligands were utilized to control particle growth and stabilize particles in organic and polymer media. These ligands also absorb ultraviolet …

    clemson Repository record for FABRICATION OF FLUORESCENT NANOPARTICLE-POLYMER COMPOSITES FOR PHOTOACTIVE-BASED MATERIALS (opens in a new tab)

  17. Processing, Structure, Properties, and Joule Heating Application of Polyacrylonitrile /Carbon Nanotubes Composite Fibers

    … used in aerospace, sporting goods, and wind turbine blades for reinforcing composite materials, due to their high tensile strength, modulus, and low density. However, due to the relatively high cost of production compared to some common metals such as steel or aluminum, carbon fibers have not …

    gatech Repository record for Processing, Structure, Properties, and Joule Heating Application of Polyacrylonitrile /Carbon Nanotubes Composite Fibers (opens in a new tab)

  18. Two-dimensional molecular self-assemblies on surfaces studied by low-temperature scanning tunneling microscopy

    … effort had been devoted to construct mono- and bi-component organic molecular networks via various intermolecular interactions and molecule-substrate interactions. A comprehensive understanding of the underlying mechanisms that control the surface self-assemblies was also aimed. Epitaxial growth …

    nus Repository record for Two-dimensional molecular self-assemblies on surfaces studied by low-temperature scanning tunneling microscopy (opens in a new tab) Download file for Two-dimensional molecular self-assemblies on surfaces studied by low-temperature scanning tunneling microscopy (opens in a new tab)

  19. (Al,Sc)N sluoksnių tyrimas dinaminių difrakcinių gardelių metodu /

    … high acoustic velocity, high thermal stability, high hardness, and more. This material also possesses the highest piezoelectric coefficient among binary semiconductor compounds connected by tetrahedral bonds, which is why it is widely used in device manufacturing. However, the …

    vilnius Repository record for (Al,Sc)N sluoksnių tyrimas dinaminių difrakcinių gardelių metodu / (opens in a new tab)

Page 1 of 2