Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 23 for “"BiW"”.

  1. ANALYSIS OF ALTERNATIVE MANUFACTURING PROCESSES FOR LIGHTWEIGHT BIW DESIGNS, USING ANALYTICAL HIERARCHY PROCESS

    … was to investigate the forming of Body in White (BIW) panels using alternative processes most suitable for replacing the conventional press working process in order to achieve a reduction in the total mass of the vehicle body structure. The selection of the alternatives was guided by multi …

    clemson Repository record for ANALYSIS OF ALTERNATIVE MANUFACTURING PROCESSES FOR LIGHTWEIGHT BIW DESIGNS, USING ANALYTICAL HIERARCHY PROCESS (opens in a new tab)

  2. Sub-Assemblies Correlation of a BIW Architecture: Global Modes and Main Transfer Functions

    … and simulation results on a Body in White (BIW). The purpose is to set up and evaluate a correlation methodology, where each sub-assembly of the car body is assessed separately to be able to localize the finite element model uncertainties. The sub-assemblies correlated in this dissertation …

    chalmers Repository record for Sub-Assemblies Correlation of a BIW Architecture: Global Modes and Main Transfer Functions (opens in a new tab)

  3. Δερματικές εκδηλώσεις ασθενών με κυστική ίνωση και συσχετισμός με το γονότυπο τους

    … occurring after Brief Immersion to Water (BIW), and has been reported as a frequent cutaneous finding among cystic fibrosis (CF) patients. The aim of our study is to evaluate and assess the diagnostic performance of BIW test as an initial screening tool for CF diagnosis.A strong association …

    greece Repository record for Δερματικές εκδηλώσεις ασθενών με κυστική ίνωση και συσχετισμός με το γονότυπο τους (opens in a new tab)

  4. Tolerance Simulation Optimization with Data Analysis

    … data-driven optimization techniques within the BIW (Body In White) assembly. Geometry assurance plays an important role in maintaining the quality throughout the product’s lifecycle by managing the deviations that originate from manufacturing and assembly processes. In complex assembly …

    chalmers Repository record for Tolerance Simulation Optimization with Data Analysis (opens in a new tab)

  5. Variability of nominally identical components and their influence in an assembly - Applications to a Volvo XC90

    … car are assembled to the same body in white (BIW) and analyzed experimentally as well as with CAE. The FE models are validated for a defined frequency range. A sensor placement for the BIW is evaluated based on the method of effective independence. Furthermore, an experimental test setup is …

    chalmers Repository record for Variability of nominally identical components and their influence in an assembly - Applications to a Volvo XC90 (opens in a new tab)

  6. COMPUTATIONAL ANALYSIS OF FEASIBILITY AND UTILITY OF DIRECT-ADHESION POLYMER-TO-METAL HYBRID TECHNOLOGIES FOR USE IN LOAD BEARING BODY-IN-WHITE AUTOMOTIVE COMPONENTS

    … alternative in the load-bearing body-in-white (BIW) components. In the present work, also various PMH approaches used to promote direct (adhesive-free) adhesion between metal and injection-molded thermoplastics are reviewed and critiqued. The approaches are categorized as: (a) micro-scale …

    clemson Repository record for COMPUTATIONAL ANALYSIS OF FEASIBILITY AND UTILITY OF DIRECT-ADHESION POLYMER-TO-METAL HYBRID TECHNOLOGIES FOR USE IN LOAD BEARING BODY-IN-WHITE AUTOMOTIVE COMPONENTS (opens in a new tab)

  7. Investigación de las condiciones tribológicas en el conformado de elementos estructurales de Aceros Avanzados de Alta Resistencia en vehículos

    … has had an impact on the automotive structures (BIW) manufacturing. The need for lighter vehicles, whit more equipment, safer and at the same time friendly to the environment, covers the entire life cycle of the car. Carmakers and steelmakers agree that weight reduction is possible, and the …

    upv Repository record for Investigación de las condiciones tribológicas en el conformado de elementos estructurales de Aceros Avanzados de Alta Resistencia en vehículos (opens in a new tab)

  8. The impact of glutamine supplementation on morphological gut development, immune cells, tissue and digesta amino acid profiles, microbiota and bacterial metabolites in low birthweight and normal birthweight male suckling piglets

    … compared Ala supplementation and birthweight (BiW) at 5 and 12 d of age. Only the jejunal tissue Gln concentration was higher in NBW piglets supplemented with Gln compared to Ala at 5 d of age. The BiW comparisons revealed no difference between LBW and NBW piglets. However, age seemed to have …

    fu-berlin Repository record for The impact of glutamine supplementation on morphological gut development, immune cells, tissue and digesta amino acid profiles, microbiota and bacterial metabolites in low birthweight and normal birthweight male suckling piglets (opens in a new tab)

  9. Optimizing Body Structures Designs to Minimize Environmental Impact

    … the sustainability of automotive Body In White (BIW) structures by exploring alternative designs. Hence, this thesis aims to investigate and provide insights into the feasibility and advantages, if any, of transitioning from presently used materials and manufacturing process at Zeekr, to an …

    chalmers Repository record for Optimizing Body Structures Designs to Minimize Environmental Impact (opens in a new tab)

  10. An investigation of the universe and anatomy of work

    … research was to validate a specified work model (BIW/K). The design uses stratified sampling (homogeneity within strata and heterogeneity between strata). A modified chi-squared statistical methodology (contingency table analysis) was used to analyze the data. The work definitions postulated by …

    vt Repository record for An investigation of the universe and anatomy of work (opens in a new tab)

  11. Creating an Accurate Microstructurally based RVE of Various Tailor Hot Stamped Material Conditions

    Most of today’s Body-In-White (BIW) design efforts focus on functionality, light weighting and maintaining safety standards. Tailored hot stamping using the in-die heating technique was introduced to meet these needs. The uniaxial damage behavior of three novel hot stamped tailored material …

    guelph Repository record for Creating an Accurate Microstructurally based RVE of Various Tailor Hot Stamped Material Conditions (opens in a new tab)

  12. ANALYSIS OF PART CONSOLIDATION TECHNIQUES FOR AUTOMOTIVE BODY IN WHITE PANELS BASED ON ADVANCED SHEET METAL FORMING TECHNOLOGIES

    … used to identify the technical requirements of a BIW manufacturing system and optimize the same. Part consolidation techniques are studied in detail and the various means to achieve them are investigated. Industrial origami¨ is proposed as an alternative to automotive stamping and a means to …

    clemson Repository record for ANALYSIS OF PART CONSOLIDATION TECHNIQUES FOR AUTOMOTIVE BODY IN WHITE PANELS BASED ON ADVANCED SHEET METAL FORMING TECHNOLOGIES (opens in a new tab)

  13. THE EFFECT OF MICROSTRUCTURE ON THE STRAIN LOCALIZATION IN COARSEGRAINED AA5754 SHEETS

    <p>AI-Mg sheets (5xxx series) for body-in-white (BIW) application are mostly<br />used for automotive structural parts due to their specific combination of<br />formability and strength. The limiting behavior for the wide application of AA5754<br />sheets is strain localization. The effect of …

    mcmaster Repository record for THE EFFECT OF MICROSTRUCTURE ON THE STRAIN LOCALIZATION IN COARSEGRAINED AA5754 SHEETS (opens in a new tab)

  14. Life Cycle Energy Assesment of Advanced Fiber Reinforced Composite Design and Manufacturing Methodologies

    … (FRP) composites for use in the Body-in-White (BiW), which can account for up to 40% of the total vehicle weight. Traditional FRP composite manufacturing processes like vacuum assisted resin transfer molding, autoclave consolidation or use of automated fiber placement have been successfully used …

    clemson Repository record for Life Cycle Energy Assesment of Advanced Fiber Reinforced Composite Design and Manufacturing Methodologies (opens in a new tab)

  15. EXPERT SYSTEM BASED APPROACH FOR MATERIAL SELECTION OF AUTOMOBILE BODY-IN-WHITE STRUCTURAL PANELS USING NUMERICAL RANKING AND SUSTAINABILITY INDICES

    … that are currently used in body-in-white (BIW) structures and exterior body panels. Sustainability scoring method was developed and used to decide on how using lighter materials in auto body applications is beneficial or not. The proposed major sustainable factors are categorized into four …

    clemson Repository record for EXPERT SYSTEM BASED APPROACH FOR MATERIAL SELECTION OF AUTOMOBILE BODY-IN-WHITE STRUCTURAL PANELS USING NUMERICAL RANKING AND SUSTAINABILITY INDICES (opens in a new tab)

  16. Spine ultrasound segmentation trained on registered CT as ground truth

    … one by adjusting the bone intensity window (BIW) to highlight the bone regions and the other by applying Medical Open Network for AI (MONAI) deep learning model. Posterior contours were extracted from segmented bones as additional training data. To evaluate the performance of the trained …

    queens Repository record for Spine ultrasound segmentation trained on registered CT as ground truth (opens in a new tab)

  17. Optimizing Weld Quality in High Stacking Ratio Automotive Joints: Integrated Experimental Design and Machine Learning Benchmarking with Limited Datasets

    … crashworthiness in automotive body-in-white (BIW) structures requires reliable resistance spot welds meeting AWS D8.1 guidelines, which mandate minimum 20% nugget penetration into thin sheets. However, this conventional criterion based solely on nugget penetration is inadequate for high …

    waterloo Repository record for Optimizing Weld Quality in High Stacking Ratio Automotive Joints: Integrated Experimental Design and Machine Learning Benchmarking with Limited Datasets (opens in a new tab)

  18. EXTENDING ORIGAMI TECHNIQUE TO FOLD FORMING OF SHEET METAL PRODUCTS

    … to satisfy the needs to fabricate Body in White (BiW) panels. Lastly, the dissertation showcases the developed tools and mathematics using several case studies to verify the developed system's functionality and merits. The results demonstrate the feasibility of the developed methodology in …

    clemson Repository record for EXTENDING ORIGAMI TECHNIQUE TO FOLD FORMING OF SHEET METAL PRODUCTS (opens in a new tab)

  19. Development of super hydrophobic membranes and their applications

    … Different concentration zones (WIB, BIW, BWCM) affect separation efficiency, with BWCM showing significantly higher efficiency attributed to well-dispersed CNTs facilitating agglomeration of water droplets.</p><p>Chapter 6 represents innovative omniphobic membranes designed to …

    njit Repository record for Development of super hydrophobic membranes and their applications (opens in a new tab)

  20. Robust dimensional variation control of compliant assemblies through the application of sheet metal joining process sequencing

    … that form the automotive Body In White (BIW) are assembled together, significant deformation and variability are possible. Although early work by Takazawa (1980) showed that compliant components can absorb individual component variability when assembled, interactions between the …

    anu Repository record for Robust dimensional variation control of compliant assemblies through the application of sheet metal joining process sequencing (opens in a new tab)

Page 1 of 2