Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 58 for “"Bicycle Model"”.
-
The New Bicycle Model: Introducing Software Considerations Early Into the Systems Engineering Design and Integration Process
… systems engineers have been introduced to the Bicycle Model as a paradigm for designing and developing complex systems that are composed of diverse subsystems that interact and function as a whole system. The Bicycle Model originally utilized the idea that a bicycle integrates electrical and …
-
Using the conventional bicycle model and model predictive control to generate feasible trajectories in a multi-vehicle system
… AVs. This report aims to present a non-linear model for vehicle dynamics that can be implemented on standard hardware, while still being valuable to gain understanding of larger problems. Additionally, a model-predictive controller is implemented to show the use of this model, in the form of …
-
Vehicle lateral stability: analytical relationships
<p>Stability analysis results for the classical bicycle vehicle model are reviewed. New analytical lateral stability relationships for three additional vehicle models are developed. The first model, the extended bicycle model, incorporates x-direction acceleration, tractive forces and aerodynamic …
-
Predictive Dynamic Simulation of Cycling Using Olympic Cyclist and Bicycle Models
… as cycling. Much of the previous research on modeling and simulation of cycling has focused on seated pedaling and models the bicycle or ergometer with an e ective resistive torque and inertia. This study was focused on modeling standing starts, a component of certain track cycling events in …
-
Safe Estimation of Vehicle Side-slip for an Autonomous Heavy Vehicle
… estimates. In this thesis, three different models of state estimators were developed in MATLAB/Simulink and their results compared. Their accuracy was compared to select the best model which would estimate the side-slip correctly. Each of the models has been given bounds (i.e., a minimum and …
-
Low-Cost Method of Estimating Vehicle Sideslip and Tire Cornering Stiffness Using Global Positioning and Inertial Measurement
… a low-cost method of estimating the linear tire model for a road vehicle is developed, which can be used to make quantitative decisions for tire selection and vehicle modification. As a traditional tire model requires measuring the forces and moments of the tire, for a range of slip and camber …
-
Motion Planning and Safety for Autonomous Driving
… more realistic swerve manoeuvres, the kinematic bicycle model is used rather than the 2-D double integrator model consid- ered in RSS. An upper bound is then computed on the required clearance distance for a swerve manoeuvre that satisfies bicycle kinematics. A longitudinal safe following …
-
Backlash Estimation for Heavy Truck Steering Systems
… arm angle from yaw rate using a steady-state bicycle model with lead compensation. The observability and practical stability of the switched system are analyzed theoretically. The estimator is validated against highway driving data from a heavy-duty truck with known backlash levels. Using a …
-
A Vehicle Dynamics Model for Torque Vectoring During a Turn.
… is to develop a comprehensive vehicle dynamics model which addresses the coupling between longitudinal, lateral and vertical dynamics. Besides providing information about the translational and rotational variables, both under transient and steady state condition, it also aims to track changes in …
-
INDEPENDENT TORQUE DISTRIBUTION MANAGEMENT SYSTEMS FOR VEHICLE STABILITY CONTROL
… a non-linear seven degree-of-freedom vehicle model incorporating a non-linear tire model was adopted and simulated in the MATLAB/SIMULINK environment. Using this model, various VDC torque management architectures as well as choices of feedback controllers were studied. For the purposes of …
-
Estimation of Road Bank and Slope Angle for Enhanced Vehicle Stability Control
The purpose of this project is to develop a model based observer that estimates the road bank and the road slope angle. An extension of the bicycle model has been used to provide estimations of the respective angles. In addition, a steady state identifier is used to provide an estimation of the …
-
Development of an Automotive Ground Vehicle Platform for Autonomous Urban Operations
… controller and lateral curvature control using a bicycle model. The control algorithms proved capable of controlling the vehicle at a level acceptable for autonomous operations. Communications are implemented using the Joint Architecture for Unmanned Systems (JAUS) using custom messages to enhance …
-
Control Strategies for Electronically Controlled Limited Slip Differentials
… Locking Differential (DSLD) were evaluated. A bicycle model was derived to use as a reference model and an extended model was derived to show the influence on the vehicle behaviour from the differential. The control strategy implemented for the eLSD combines logic with a variable PID-controller …
-
A Comparative Study of Model Predictive Control and the Stanley Method for Vehicle Path Tracking Applications
This thesis compares a model predictive controller (MPC) and a lateral Stanley controller for vehicle path-tracking applications under simulation-based and perception-driven operating conditions. Both controllers were evaluated in simulation using a nonlinear dynamic bicycle model executing single …
-
Model predictive control for vehicle steering using road information in the local frame
… simulated. The control algorithm is based on the model predictive control (MPC) framework. The simulation used a single track dynamic model (also known as the bicycle model) for simulating the car's motion, and a kinematic model, linearized around the currently sampled state at every sampling …
-
Vehicle Dynamics Simulation Method Development
… The thesis defines a number of simulation models and the co-operative work ow between them. All the simulation models, from a bicycle model to a full vehicle simulation model with exible components, were created, verified and evaluated for their usabilities. The simulation models provided …
-
Information-Gathering Navigation for Object Characterization with MCTS and Heuristic Rollouts
This thesis presents a model predictive control (MPC) planning framework for autonomous information-gathering navigation with an Ackermann steering vehicle operating in unstructured environments. Specifically, the work addresses the problem of optimally maneuvering a ground vehicle (GV) equipped …
-
NALCN-Encoded Sodium Leak Currents in the Regulation of Daily Rhythms in the Excitability of Neurons in the Suprachiasmatic Nucleus
… potassium (K+) conductance(s). An alternative model, “bicycle” model, for circadian regulation of membrane excitability in Drosophila clock neurons, however, has also been proposed. In this model, an increase in the NALCN-encoded sodium (Na+) leak conductance underlies the daytime increase in …
-
An Investigation of the Clothoid Steering Model for Autonomous Vehicles
… This assumption is loosely referred to as the "bicycle model" and it relates directly to the kinematic parameters of the steering mechanism. The second assumption is that the steering actuator can provide a constant steering velocity. In other words, the actuator controlling the steering motion …
-
Estimation of the Longitudinal and Lateral Velocities of a Vehicle using Extended Kalman Filters
… thesis: one using a deterministic tire-force model and the other using a stochastic tire-force model. Previous literature has focused on linear stochastic tire-force models and on linear deterministic tire-force models. However, it is well known that there exists a nonlinear relationship …
Page 1 of 3