Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 28 for “"Bingham model"”.
-
Fibre modelling in venturi flow and disc refiner. Implementation and development of models for turbulent fibre suspension flow.
… efficiency in the pulp and paper industry a model for turbulent fibre suspension flow was needed. The model was also desired to be suitable for applications alongside additional multiphase flow models to study cavitation in fibre suspension flows. Two models with different levels of …
-
Rate and time dependent behavior of structural adhesives
… constitutive equation derived from mechanical models can be used for creep and relaxation loading. Modifications to the constitutive equations for constant strain rate loading are proposed. Nonlinear constitutive equations are derived using a nonlinear perturbation technique in conjunction with …
-
Slow flow of a Bingham fluid in a gap of slowly varying width
The slow Poiseuille flow of a Bingham fluid in an infinitely long gap of slowly varying width is considered. A consistent analytical theory is developed using a lubrication scaling without deviating from the Bingham model. It is shown that for sufficiently small gap width variations there is a …
-
Etude de l’effet de la couche limite sur les profils de vitesse du béton pompé
… this evolution is typically described by a Bingham model, while for a self-compacting concrete with low water/powder ratio, the evolution often becomes non-linear and can be described by a modified Bingham or Herschel-Bulkley model, considering shear-thickening. In these models, a critical …
-
Laboratory framework for understanding mix formulation for 3D printed cementitious materials
… mixtures. The commonly used rheological model for fresh state concrete is the Bingham model. Since 3D printed cement-based materials are variant in mixture designs due to incorporation of various powder additives and chemical admixtures to achieve the unique processing methods that are …
-
Experimental Study and Development of an Injection Grout Mix Proportioning Tool Based on Key Fresh-State Properties
… and plastic viscosity, were evaluated using the Bingham model at 5 and 20 minutes after mixing. Additional fresh state properties such as water separation, filtration performance, density, air content, and setting behavior were also assessed. The results demonstrated that the water cement ratio …
-
Avaliação e modelagem reológica de fluido de perfuração base água
… by these addictives, by applying mathematical models for fluid flow behavior, in order to determine the best flow equation to represent the system, as well as the model parameters. The mathematical models applied in this research were: the Bingham Model, the Ostwald de Wale Model, and the …
-
Free-Surface Simulations with Consideration of Moving Objects, Sea Waves and Scour Based on the Reynolds-Averaged Navier-Stokes Equations
… ventilation is presented. For the turbulence modeling, the two-equation model k-omega-SST from OpenFOAM is modified with well-known adjustments. The existing method for simulating rigid body motion is supplemented by a known method for stabilizing the explicit time discretization. In addition, …
-
Correlating Self-Consolidating Concrete mixture composition to its rheological properties
… evaluate SCC’s performance. A revised modified Bingham model was proposed to adequately account for the linear and non-linear responses of the concrete flow. It postulates that the flow is divided into a linear and non-linear part. The revised model is found to provide more consistent and …
-
An Investigation of Electro-Rheological Fluids in Engineering
… for the shear mode of operation based on the Bingham model. The prediction model is based on the (solid to liquid) weight fraction, applied electric field and strain rate. An ER clutch with a single disk was designed, and tested to validate the model. In Chapter 3, an ER valve experiment is …
-
Behavior of Polymer Grouted Sand and Polymer Modified Smart Cement with Verification of New Failure Model for Concrete
… acrylamide polymer modified smart cement were modelled using Modified Bingham model, Herschel Bulkley model and Vipulanandan rheological model. Based on the coefficient of determination and root mean square error, Vipulanandan model predicted the test results well. Also, the investigation of …
-
Fresh-state assessment of 3D printable concrete mixtures
… data at different resting times and Roussel’s model fits, thixotropic analysis was performed. The flow curve test applied increasing shear rate in steps to fresh concrete specimens. Through shear stress vs shear rate plots and corresponding Bingham model fits, yield stress and plastic viscosity …
-
Numerical and experimental investigation of macro-scale mixing applied to pulp fibre suspensions
… of using computational fluid dynamics (CFD) to model these systems. CFD simulations for laboratory-scale and industrial-scale mixing chests were developed with the pulp suspensions treated as Bingham fluids. The computed flow fields were used to determine the dynamic response of the virtual …
-
Rheology of high performance shotcrete
… shotcrete, were designed and constructed. A model based on rheological behavior was finally developed to predict pumpability and shootability. The values of both flow resistance and torque viscosity were used to represent the rheological behavior of fresh shotcrete, which is similar to the …
-
Two-Dimensional Transient Flows and Stability of Concentrated Suspensions of Clay Particles and Rheology
… compared to the shear thinning region. The H-B model is found to be more rational than the Bingham model in a rather wide range of shear rates. A new empirical formula is proposed to estimate yield stress of mud at normal atmospheric temperature. Due to plasticity, the flow is divided into a …
-
Model for Characterizing Rheological Behaviour of Fresh Mortar and Conrete
… the mixture composition into the constitutive model, one can provide the concrete industry with the necessary tools to design and control the quality of concrete.</p> <p>This study presents a constitutive material model for mortar and concrete that employs the cell method and builds on the work …
-
Rheological and colloidal properties of commercial brewing yeast suspensions
… microscopy. In a summary chapter, the cell floc model (a modification of Hunter's elastic floc model) was used to the explain the rheological and colloidal behaviour of brewing yeast suspensions. Flow behaviour studies of the commercial yeast suspensions suspended in a calcium-containing sodium …
-
Modelling the Transport of Tailings Over Erodible Bed During a Tailings Dam Failure
… are very complex and conventional flood routing models are not dependable for predicting tailings dam breach inundation extent as they do not consider the non-Newtonian visco-plastic nature of tailings. Tailing's transport and floods following a tailings dam failure are also not just confined to …
-
Flow of a non-Newtonian Bingham plastic fluid over a rotating disk
… pump. This type of flow can be numerically modeled by a rotating disk system, in combination with an appropriate constitutive equation, such as the relation for a Bingham fluid. A Bingham fluid does not begin to flow until the stress magnitude exceeds the yield stress. However, experimental …
-
Developing a methodology for characterising in-situ viscosity profiles in tumbling mills
… mill. The rheology results indicated that the Bingham model is the rheological model which gives the best description of the rheology of El Sol dado slurry. It had the highest R² adjusted values at all tested solids concentrations concentration ranges. The rheological behaviour of El Soldado …
Page 1 of 2