Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 25 for “"Bio-mass"”.
-
Bio-mass for biomass: biological mass spectrometry techniques for biomass fast pyrolysis oils
<p>Biomass fast pyrolysis oils, or bio-oils, are a promising renewable energy source to supplement or replace petroleum-based products and fuels. However, there is a current lack of understanding about the pyrolysis process which creates a bottleneck towards making biomass pyrolysis an economically …
-
Graphitization of lignocellulosic bio-mass via hydrothermal carbonization and spark-plasma sintering : application in lithium-ion batteries
… alternative through the production of bio-graphite from lignocellulosic biomass using a combination of hydrothermal carbonization (HTC) and spark plasma sintering (SPS). Multiple biomass feedstocks, including arbutus bark, coffee grounds, seaweed, milfoil, and sawdust, were converted …
-
Regression Analysis of Milorganite Sales
… form, begins with the introduction of a biomass of organisms into wastewater as it enters the sewage treatment plant. These organisms, in an oxygen rich environment, consume the organic impurities within the wastewater. The organisms grow in size and multiply. When the impurities are …
-
Catalytic Hydrodeoxygenation and Dehydration of Bioderived Oxygenates to Renewable Hydrocarbon Building Block Molecules: Enabling Renewable Carbon Fiber
… pathways that can effectively remove oxygen from bio-derived carboxylic acids and alcohols under mild reaction conditions to produce propene which can be converted to renewable carbon fibers. Carboxylic acid hydrodeoxygenation and alcohol dehydration are necessary for successfully producing …
-
Scandinavian countries’ perspectives on low-carbon industry transition
… the refining industry will be converted into bio refining, making solely bio fuels. Regarding the steel industry it was found that hydrogen could be used as an reducing agent instead of using cok which allowed them to reach zero emissions. For the cement manufacturing industry a plasma …
-
Retrofitting analysis of integrated bio-refineries
A bio-refinery is a processing facility that produces liquid transportation fuels and/or value-added chemicals and other products. Because of the dwindling resources and escalating prices of fossil fuels, there are emerging situations in which the economic performance of fossil-based facilities can …
-
Stress corrosion cracking of 316L austenitic stainless steel in high temperature ethanol/water environments
There has been an increase in the production of bio-fuels. Organosolv delignification, high temperature ethanol/water environments, can be used to separate lignin, cellulose, and hemicelluloses in the bio-mass for bio-fuel production. These environments have been shown to induce stress corrosion …
-
Synthetic and Mechanistic Investigations of Ruthenium Catalyzed Coupling Reactions via C−C and C−N Bond Activation
… from readily available substrates derived from bio-mass feedstock. Despite these advances, designing a broadly applicable catalytic method faces challenges of selectivity and harsh reaction conditions. A five coordinate Ru-H complex was found to be an effective catalyst for promoting the …
-
Propagation of thermo-mechanical waves in deforming nonlinear viscoelastic bodies
… soft and hard tissues, and all kinds of bio-mass. Many bodies are undergoing static or time varying inhomogeneous loading. Examples can vary from conditions that result in or from earthquakes and landslides to composites and live tissues functioning in loaded structures and bio-MEMS. Some …
-
Effectiveness of Attached Growth Process for Toxicity Reduction in Low Strength Paper Mill Wastewaters
… considered low strength wastes, especially when biological treatment is to be provided. To further reduce BOD5, the conventional activated sludge process is considered uneconomical as the F/M ratio is quite low. Operation of such a process needs extended aeration, consuming excess electrical …
-
Cellulose Nanocrystal Aqueous Inks Evaluated for Printed Electronics and Application to Thin-film Transistors
… in order to enable smart functionality on mass produced goods. The challenge faced is to find a suitable material system and process that is bio-sourced, degradable, and compatible with novel substrates for electronics, such as flexible paper and plastic, which are often sensitive to …
-
A management planning model for the Senegal River Basin.
… a protective, diverse and productive bio-mass cover in the desertifying river valley, and to reverse the tide of drought induced migration from rural to urban areas. A comparative river system simulation study was conducted to analyze the effects of both the rice production development …
-
ANALYSIS OF FACTORS AFFECTING FARMERS’ WILLINGNESS TO ADOPT SWITCHGRASS PRODUCTION IN THE SOUTHERN UNITED STATES AND AN EXCEL SPREADSHEET-BASED DECISION TOOL FOR POTIENTIAL SWITCHGRASS PRODUCERS
… possible source that meets these criteria is biomass, which in the United States is the largest source of renewable energy as it accounts for over 3 percent of the energy consumed domestically and is currently the only source for liquid renewable transportation fuels. Continued development of …
-
Analyzing sustainable energy opportunities for a small scale off-grid facility: a case study at Experimental Lakes Area (ELA), Ontario
… reduced the initial capital cost for biomass by $27,000, by $49,500 for wind power and by $136,500 for solar power. Many alternative energies show promise as potential energy sources to reduce the diesel and propane consumption at ELA including wind energy, solar heating and bio-mass. …
-
Fundamental study on perspectives for post-harvest bioprotection of cereal crops
… the ergosterol content (measure of fungal bio-mass) increased from <0.75 ppm to 44 ppm. Substantial levels of mycotoxins, such as deoxynivalenol and zearalenone were found in concentrations up to 953 ppb and 78 ppb, respectively. Also the grain quality was reduced due to the degradation of …
-
Reticulated foam as a biomass support medium in the anaerobic digestion of an industrial wastewater.
… An open cell reticulated foam was used as a biomass support media (BSM). The foam pads (25 mm cubes) were randomly packed in the 2.5 m- 3 reactor with an unpacked section beneath the bed. Four general operational regimes were evaluated. These were: single and two stage operation, with and …
-
Drivers, barriers and strategies for bioenergy dissemination in EU rural cross-border regions : a case study of the border region between Germany, Poland and the Czech Republic
… generation of renewable energy, in particular biomass, contributes to economic development through the creation of employment opportunities. In particular, rural regions with limited development opportunities can benefit from renewable energy production and dissemination. European rural border …
-
Control of distributed generation for grid-connected and intentional islanding operations
… sources; such as fuel-cell, wind-turbine, bio-mass, micro-turbine and solar-cell systems; has been considered as a promising solution to the above problems. DG is defined as small, modular electricity generators located close to the end customer's load connection point. DGs can enable …
-
Optimisation, design, development, and trial of a low-cost solar oven with novel concentrator geometry
… <p>A need for low-cost solar cookers to replace bio-mass worldwide was identified, and the concentrator design was then developed as a low-cost solar oven. Despite existing in some number, no current design is able to achieve high performance at low-cost. An industrial partner, Dytecna, was …
-
Role of potassium hydroxide in fouling and fireside corrosion processes in biomass-fired boilers
Slagging, fouling and fireside corrosion in biomass fuelled boilers and gasifiers are major obstacles that diminish the efficiencies of the energy transformation processes in these systems. High chemical to thermal and thermal to electric conversion efficiencies require high surface temperatures in …
Page 1 of 2