Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 55 for “"Bio-materials"”.

  1. SURFACE POLYMERIZATION OF INORGANIC MATERIALS FOR RENEWABLE ENERGY, INTELLIGENT MATERIALS, AND BIO-MATERIALS APPLICATIONS

    … The surface grafted polymer/inorganic materials can be used for various applications and fields, including renewable energy, intelligent materials, and bio-materials. In general, surface polymerization based on controlled radical polymerization (CRP) offers various benefits, including …

    unr Repository record for SURFACE POLYMERIZATION OF INORGANIC MATERIALS FOR RENEWABLE ENERGY, INTELLIGENT MATERIALS, AND BIO-MATERIALS APPLICATIONS (opens in a new tab)

  2. Design, Fabrication, Testing of CNT Based ISFET and Characterization of Nano/Bio Materials Using AFM

    … for learning the properties of chemical or biomedical samples in micro or nano level. Dimensional and mechanical property behaviors of Vertically Aligned Carbon Nanofibers (VACNFs) are studied after temperature and humidity treatment using AFM. Furthermore, mechanical property testing of …

    arkansas Repository record for Design, Fabrication, Testing of CNT Based ISFET and Characterization of Nano/Bio Materials Using AFM (opens in a new tab)

  3. Χημική και ρεολογική διερεύνηση βιοτροποποιημένης ασφάλτου με διάφορους τύπους βιομάζας

    The present dissertation investigates the use of bio-derived materials as modifiers for petroleum-based bitumen. Six solid-phase (Kraft lignin, microchlorella, chlorella, olive-waste biochar, rice husk, spent coffee grounds) and two liquid-phase (corn oil, sunflower seed oil) bio-modifiers were …

    greece Repository record for Χημική και ρεολογική διερεύνηση βιοτροποποιημένης ασφάλτου με διάφορους τύπους βιομάζας (opens in a new tab)

  4. Η μηχανική των επαφών στα ελαστομερή υλικά: ανάλυση πειραμάτων διείσδυσης και εφαρμογές στις ανθρώπινες αρτηρίες

    … effort to apply the theory to specific type of materials called bio-materials. Bio-materials such as human arteries belong in the subcategory of elastomers.Elastomers belong in the general category of polymers with high levels of elasticity caused by their internal structure. To calculate their …

    greece Repository record for Η μηχανική των επαφών στα ελαστομερή υλικά: ανάλυση πειραμάτων διείσδυσης και εφαρμογές στις ανθρώπινες αρτηρίες (opens in a new tab)

  5. Manufactured by Nature: Growing Generatively Designed Products

    … processes. A new generation of making includes biomimicry-inspired technologies such as 3D printing and parametric simulation, which have transformed the production paradigm. Utilizing nature as industry, this thesis explores the possibility of “growing” designed objects by employing nature’s …

    vcu Repository record for Manufactured by Nature: Growing Generatively Designed Products (opens in a new tab)

  6. The Effects of Wing Manipulation on Automated Cutting of Biological Materials

    … yield. In contrast to engineering objects, biological products present difficulties such as variation in size, shape, and material properties. Unlike past research, which generally found ways to emulate the manual cutting motion, this thesis investigates the effects of wing manipulation on …

    gatech Repository record for The Effects of Wing Manipulation on Automated Cutting of Biological Materials (opens in a new tab)

  7. Scanning electron microscopy investigation of bio-polymer composites morphology

    The development of nano-composite materials puts higher demand on morphological analysis techniques. The bio-nano-composite material systems is among the most challenging nano-composite materials for morphology characterization due to its sensitivity to damage, complex molecular conformations and …

    whiterose Download PDF for Scanning electron microscopy investigation of bio-polymer composites morphology (opens in a new tab)

  8. Lignin Composites with Phenol-Acrylates Cured by Electron Beam

    … lignin represents a key priority to almost any bio-materials research organization. The purpose of this study is to investigate the interaction with and effects of lignin within phenol- acrylate composites cured by electron beam, characterizing changes to both physical and chemical properties. …

    ut-knoxville Repository record for Lignin Composites with Phenol-Acrylates Cured by Electron Beam (opens in a new tab)

  9. HETEROGENEOUS POLYMERIZATION OF METHYL METHACRYLATE AT LOW TEMPERATURE IN DISPERSED SYSTEMS

    … by: Professor, Dr. Kyu Yong Choi, Chemical and Biomolecular Engineering Department Dispersion polymerization is a unique method to prepare monodisperse polymer particles of 1-10 µm in a single step process. This process is usually carried out at high temperatures that are not cost effective and …

    maryland Repository record for HETEROGENEOUS POLYMERIZATION OF METHYL METHACRYLATE AT LOW TEMPERATURE IN DISPERSED SYSTEMS (opens in a new tab)

  10. Micro-fabrication of bio-MEMS based force sensor to measure the force response of living cells

    … thesis presents a method of micro-fabricating a bio-MEMS based force sensor which is used to measure the force response of living cells. Initially, the basic concepts of MEMS have been discussed and the different micro-fabrication techniques used to manufacture various MEMS devices have been …

    mtu Repository record for Micro-fabrication of bio-MEMS based force sensor to measure the force response of living cells (opens in a new tab)

  11. A Geochemical Analysis of the Arkansas Novaculite and Comparison to the Siliceous Deposits of the Boone Formation

    … and potassium. This would seem to eliminate a biogenic origin and favor a volcanic source of the silica that comprises these units. Trace and rare earth element (REE) analysis also suggests that the Arkansas Novaculite and the chert in the lower Boone Formation may have both been formed from …

    arkansas Repository record for A Geochemical Analysis of the Arkansas Novaculite and Comparison to the Siliceous Deposits of the Boone Formation (opens in a new tab)

  12. Surface Modification and Characterization of Si0₂

    … their importance in microelectronics, sensors, bio-materials, and adhesion. Surface energy is particularly important in chemical sensors and biosensors since it affects the sorption of molecules onto the active area of the sensor and the adhesion of sensing films. Surface energy has …

    sdstate Repository record for Surface Modification and Characterization of Si0₂ (opens in a new tab)

  13. Design, development and characterization of a novel neutron and X-ray combined computed tomography system

    … structure of objects (e.g. nuclear fuel, nuclear materials, explosives and bio materials) and phenomena (e.g. particle tracking) can be very important in nondestructive testing applications. Computed tomography systems are indispensable tools for these types of applications because they provide a …

    must-thes Repository record for Design, development and characterization of a novel neutron and X-ray combined computed tomography system (opens in a new tab)

  14. Fabrication and mechanical characterization of liquid-in-solid elastomeric soft composites

    As one of the emerging new composite materials, liquid-in-solid elastomer soft composites are of the current research interest for their enhanced mechanical properties and high biological application potentials. Despite established microscopic models for describing elastic behaviors of the …

    uiuc Repository record for Fabrication and mechanical characterization of liquid-in-solid elastomeric soft composites (opens in a new tab)

  15. Improvement of 3D printing quality for fabricating soft scaffolds

    … integrates methods of cells, engineering and materials to improve or replace biological functions of native tissues or organs. 3D printing technologies have been used in TE to produce different kinds of tissues. Based on review of the exiting 3D printing technologies used in TE, special …

    manitoba Repository record for Improvement of 3D printing quality for fabricating soft scaffolds (opens in a new tab)

  16. 3D PRINTING, OPEN-SOURCE TECHNOLOGY AND THEIR APPLICATIONS IN RESEARCH

    … for all kinds of material such as metals, bio-materials, semiconductors are become feasible, the open-source paradigm has the potential to replace the tradition manufacture and activate the new future.

    mtu Repository record for 3D PRINTING, OPEN-SOURCE TECHNOLOGY AND THEIR APPLICATIONS IN RESEARCH (opens in a new tab)

  17. Design and evolution of synthetic biological systems

    The study of biology has undergone a fundamental change due to advancements in genetic engineering, DNA synthesis and DNA sequencing technologies. As opposed to the traditional dissective mentality of discovering genes via genetics, describing genetic behaviors through biochemistry, and then …

    texas Repository record for Design and evolution of synthetic biological systems (opens in a new tab)

  18. Improving Manufacturing Data Quality with Data Fusion and Advanced Algorithms for Improved Total Data Quality Management

    … and predictive analytics in the sustainable-biomaterials industries is currently not feasible given the lack of organization and management of the database structures. The advent of artificial intelligence, data mining, robotics, etc., has become a standard for successful business endeavors …

    ut-knoxville Repository record for Improving Manufacturing Data Quality with Data Fusion and Advanced Algorithms for Improved Total Data Quality Management (opens in a new tab)

  19. Production and Elastomer Compatibility of Renewable Fuels

    … of clean energy. One such alternative is biofuel, which is still hydrocarbon based but is made from bio-materials, most notably plants. Widespread use of biofuels for everyday transportation would increase demand, requiring increased planting of biomass sources which would act to remove …

    ucf Repository record for Production and Elastomer Compatibility of Renewable Fuels (opens in a new tab)

Page 1 of 3