Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 137 for “"Bioaerosol"”.
-
Design of bioaerosol sampling inlets
An experimental investigation involving the design, fabrication, and testing of an ambient sampling inlet and two additional Stokes-scaled inlets is presented here. Testing of each inlet was conducted at wind speeds of 2, 8, and 24 km/h (0.55, 2.22, and 6.67 m/s), and characterized for particle …
-
A study of bioaerosol sampling cyclones
A wetted wall cyclone using an airblast atomizer upstream of the inlet was designed as an improvement of a wetted wall cyclone developed by White et al. in 1975, which uses liquid injection through a port on the wall of the cyclone inlet. In the course of this project, many changes to different …
-
An improved wetted-wall bioaerosol sampling cyclone
A modified wetted-wall cyclone using different methods of water injection techniques upstream of the inlet was designed as an improvement to a wetted-wall cyclone developed by White, which uses liquid injection through a port on the wall of the cyclone inlet. The new cyclone has a high aerosol …
-
Design of wetted wall bioaerosol concentration cyclones
… and characterization of a family of wetted wall bioaerosol cyclone concentrators that consume very low power and are capable of delivering very small liquid effluent flow rate of highly-concentrated hydrosol. The aerosol-to-aerosol penetration cutpoint for the cyclones is about 1µm. The …
-
Enhanced real-time bioaerosol detection : atmospheric dispersion modeling and characterization of a family of wetted-wall bioaerosol sampling cyclones
… of biological weapons attacks through improved bioaerosol surveillance, detection, and response capabilities. The effects of bioaerosol release characteristics, transport in the atmospheric surface layer, and implications for bioaerosol sampler design and real-time detection were studied to …
-
A circumferential slot virtual impactor for bioaerosol concentration
A virtual impactor aerosol concentrator with a circumferential inlet slot has been built and tested. Circumferential slot virtual impactors (CSVIs) have low pressure losses, similar to linear slot impactors, but without particle losses due to end effects. The CSVI was designed using the results …
-
Real-time bioaerosol analysis in the healthcare environment
… airborne infection risks. Direct continuous bioaerosol sampling is an established technology used to characterise ambient external air. Portable instruments such as the Wideband Integrated Bioaerosol Sensor (WIBS) combine laser particle size and shape detection with signals of particle …
-
Caracterización aeropalinológica del bioaerosol atmosférico de la ciudad de Cartagena
… las concentraciones de estas partículas en el bioaerosol y determinados fenómenos meteorológicos con los que se relacionan.. [ENG] This PhD presents the aropalynological characterization of the atmospheric aerosol of Cartagena, including both pollen and fungal spores. The dissertation has been …
-
A two-stage circumferential slot virtual impactor for bioaerosol concentration
Slot virtual impactors provide an efficient low power method of concentrating aerosols. A circumferential slot virtual impactor (CSVI) is especially effective because it has a continuous slot, and, therefore, has no losses associated with the ends of the slot. A CSVI can also fit a longer slot in a …
-
A field comparison of four bioaerosol samplers for enumerating airborne fungi
… data. A field comparison of four bioaerosol samplers, the Reuter Centrifugal Sampler (RCS), the Andersen N6 Single Stage (N6), the Surface Air System Super 90, and the Air-o-Cell sampler (AOC), was conducted in a variety of public buildings for the measurement of fungal aerosols to …
-
A Comparison of Outdoor Bioaerosol and Particulate Measurements in Las Vegas
… species, some of which are allergenic. Outdoor bioaerosols consist of microorganisms, pollen, spores, and other agents that could cause infections or affect the health of humans. Studies have suggested that exposure to bioaerosols through inhalation can lead to various human health risks. …
-
Two-stage and Three-stage Virtual Impactor System for Bioaerosol Concentration
The Circumferential Slot Virtual Impactor (CSVI) and The XMX/2A are two virtual impactors designed for sampling aerosol particles from a dilute environment by separating the aerosol into a fine and a coarse particle fraction. Dust particles in the ambient air may deposit within the virtual …
-
Bioaerosol Dispersal Across Scales: Regional Patterns, Field Study, and Model Evaluation
Bioaerosols--including seeds, pollen, fungal spores, bacteria, and viruses--are fundamental agents connecting atmospheric processes to agriculture, ecosystem function, and human and animal health. This dissertation uses Lagrangian stochastic (LS) models to simulate how these particles travel and …
-
Eulerian and Lagrangian analyses of bioaerosol transport in three deep convective storm morphologies
… of potential rain-induced aerosolization of bioaerosols. The squall line and supercell attain greater values of both these quantities and sustain them for longer periods, indicating that more air in their updrafts originates in rainy regions. For light rain (>= 1 mm/hr), the squall line and …
-
Low-cost fabrication methods for creating an inertial-based, multiphase microfluidic bioaerosol sampler
… of an inertial-based, multiphase microfluidic bioaerosol sampling device. These desired parameters include optical transparency for visualizing flow conditions, uniform bond quality for a leak free device, good burst pressure capabilities due to high relative air pressures, and medium …
-
Evaluation of a Fluorescence Method for Quantifying Bioaerosol Concentrations on Air Quality Filter Samples
… multiple components from multiple sources. Bioaerosols are an important component of PM, but there is limited knowledge about how bioaerosols contribute to PM2.5 and PM10 concentrations. There is also a lack of research about the incidence and prevalence of disease caused by bioaerosols and …
-
A two-stage 100 l/min circumferential slot virtual impactor system for bioaerosol concentration
A two -stage circumferential slot virtual impactor aerosol concentrator system has been developed that is designed for nominal operational conditions of a 2 μm AD cutpoint, an aerosol inflow to the first stage of 100 L/min and a minor flow rate from the second stage of 1 L/min. Each unit was tested …
-
Improved Characterization and Analysis Strategies for UV-LIF Bioaerosol Instrumentation: Lab and Field Application
… of biological origin, also referred to as bioaerosols or primary biological aerosol particles (PBAP), are important to various human health and environmental systems. There has been a recent steep increase in the frequency of published studies utilizing commercial instrumentation based on …
-
Environmental polydisperse bioaerosol measurements in classrooms with and without Upper-Room Ultraviolet Germicidal Irradiation
… Irradiation (UVGI) is known to inactivate bioaerosols in laboratory and chamber environments. This study was developed to begin filling the current knowledge gap between theoretical researches in laboratory and field application. The primary objective is to develop a constructional protocol …
Page 1 of 7