Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 129 for “"Bioinks"”.

  1. PVA-SbQ Bioinks for Biofabrication

    … 3D printing, bioprinting utilizes cells and bioinks to create organ-like hydrogels, facilitating the proliferation of living cells. Despite its potential, the advancement of biofabrication is constrained by the limited availability of suitable bioinks. The emergence of biofabrication …

    calgary Repository record for PVA-SbQ Bioinks for Biofabrication (opens in a new tab)

  2. Novel Poly(2-oxazoline) Based Bioinks

    … with a special focus on their suitability as bioinks. In general, the copolymerization of 2-oxazolines and 2-oxazines bearing different alkyl side chains was demonstrated to yield polymers in good agreement with the degree of polymerization aimed for and moderate to low dispersities. For every …

    wurz-thes Repository record for Novel Poly(2-oxazoline) Based Bioinks (opens in a new tab)

  3. Multifunctional nanocomposite bioinks for 3D bioprinting applications

    … the development of two different types of bioinks using nanomaterials mixed with GelMA. Bentonite clay nanoparticle plays a role in reinforcing GelMA by enhancing the mechanical properties of the crosslinked GelMA as bentonite works as a physical crosslinked to the GelMA chains and supports …

    ubc Repository record for Multifunctional nanocomposite bioinks for 3D bioprinting applications (opens in a new tab) Download PDF for Multifunctional nanocomposite bioinks for 3D bioprinting applications (opens in a new tab)

  4. DEVELOPMENT OF COLLAGEN BIOINKS FOR CARTILAGE BIOPRINTING

    … to the field remains the development of adequate bioinks. Bioinks must be printable, cell-friendly, and exhibit mechanical properties necessary for construct implantation. Collagen bioinks are promising due to their cell-friendly properties but exhibit weak mechanical properties and slow gelation …

    cornell Repository record for DEVELOPMENT OF COLLAGEN BIOINKS FOR CARTILAGE BIOPRINTING (opens in a new tab)

  5. 3D Bioprinting of Advanced Bioinks for Tissue Engineering Applications

    … The selection of materials to be used as bioinks remains the main bottleneck in the realization of 3D bioprinting technology. This thesis aims to develop novel bioinks to address the challenges associated with current bioinks by employing polymers and nanomaterials. The specific objectives …

    adelaide Repository record for 3D Bioprinting of Advanced Bioinks for Tissue Engineering Applications (opens in a new tab)

  6. Designing Advanced Bioinks for 3D Printing Complex Tissue Structures

    … of complex tissue structures using cell-loaded bioinks. However, 3D bioprinting has hit a bottleneck in progress due to the lack of suitable bioinks that are printable, have high shape fidelity, and are mechanically resilient. In this study, we introduce a novel family of nanoengineered bioinks …

    tamu Repository record for Designing Advanced Bioinks for 3D Printing Complex Tissue Structures (opens in a new tab)

  7. FUNCTIONAL 3D PRINTABLE BIOINKS FOR SKIN REGENERATION IN WOUNDS

    … their native properties. The efficacy of enzyme bioinks in vitro is demonstrated in Chapter 3. Cytocompatibility tests with skin cells to evaluate cell viability and proliferation in the presence of enzyme hydrogels are performed. The enzyme hydrogels are tested for their ability to counteract …

    unsw Repository record for FUNCTIONAL 3D PRINTABLE BIOINKS FOR SKIN REGENERATION IN WOUNDS (opens in a new tab)

  8. Synthetic Dynamic Covalent Hydrogel Bioinks For Extrusion Bioprinting Applications

    Soft hydrogels provide a favorable environment for cells to grow, proliferate and differentiate. However, in the context of 3D bioprinting, hydrogels are often limited by templates, weak mechanics, and/or a need to work at non-physiological temperature/pH to enable gelation. Recently, we have …

    mcmaster Repository record for Synthetic Dynamic Covalent Hydrogel Bioinks For Extrusion Bioprinting Applications (opens in a new tab)

  9. 3D Bioprinting of Hybrid Biopolymer Bioinks for Wound Healing Applications

    … and explores several novel hybrid CMC-based bioinks tailored for wound healing applications. First, a multicomponent bioink combining CMC with xanthan gum (XG) and hyaluronic acid (HA) was formulated to harness the printability of CMC and XG alongside the cellular support properties of HA. …

    adelaide Repository record for 3D Bioprinting of Hybrid Biopolymer Bioinks for Wound Healing Applications (opens in a new tab)

  10. Hyaluronic acid based Bioinks for Biofabrication of Mesenchymal Stem Cells

    As a major component of the articular cartilage extracellular matrix, hyaluronic acid is a widely used biomaterial in regenerative medicine and tissue engineering. According to its well-known interaction with multiple chondrocyte surface receptors which positively affects many cellular pathways, …

    wurz-thes Repository record for Hyaluronic acid based Bioinks for Biofabrication of Mesenchymal Stem Cells (opens in a new tab)

  11. Nanoengineered Ionic-Covalent Entanglement (NICE) Reinforced Bioinks for 3D Bioprinting

    … using cell-containing hydrogels, called bioinks, that can be cross-linked to form a hydrated matrix for encapsulated cells. Bioprinting currently enables precise deposition of viable cells in 2 dimensions, however, their printability in the Z-axis is severely limited because the inks are …

    tamu Repository record for Nanoengineered Ionic-Covalent Entanglement (NICE) Reinforced Bioinks for 3D Bioprinting (opens in a new tab)

  12. Hydrogels as Biofunctional Coatings and Thiol-Ene Clickable Bioinks for Biofabrication

    Ziel dieser Arbeit war die Entwicklung von funktionalisierbaren Hydrogel Beschichtungen für Schmelz-elektrogeschriebene PCL Gerüste und von Bio-druckbaren Hydrogelen für die Biofabrikation. Hydrogel Beschichtungen von Schmelz-elektrogeschriebenen Konstrukten ermöglichten die Kontrolle der …

    wurz-thes Repository record for Hydrogels as Biofunctional Coatings and Thiol-Ene Clickable Bioinks for Biofabrication (opens in a new tab)

  13. Reporter Chondrocyte Optimization of Bioinks for Zonal 3D Bioprinting of Cartilage

    Osteoarthritis (OA) is the most common form of arthritis, often thought of as a disease of the elderly, but post traumatic OA predominantly impacts younger individuals. Articular cartilage is the tissue that coats the end of your bones in synovial joints. Since cartilage has limited healing …

    ucf Repository record for Reporter Chondrocyte Optimization of Bioinks for Zonal 3D Bioprinting of Cartilage (opens in a new tab)

  14. Optimizing extrudable bioinks: Mechanical and chemical properties for tailored tissue engineering

    … attention to the design and characterization of bioinks. Using a CELLINK BIO X extrusion bioprinter, we systematically investigated how rheological descriptors, chemical functionalities, and nanoscale crystallinity govern construct fidelity and the fate of encapsulated cells. A range of fibrin-, …

    uvic Repository record for Optimizing extrudable bioinks: Mechanical and chemical properties for tailored tissue engineering (opens in a new tab)

  15. RAPID MAGNETIC PRINTING OF 3D CELLULAR STRUCTURES USING MAGNETIC CELL BIOINKS

    … structures in vitro. The biological inks (bioinks) used to form these structures were composed of cells suspended in a liquid medium. Development of this technique was based on exploiting the inherent magnetic susceptibility of cells. Since cells and their liquid medium are diamagnetic …

    mcmaster Repository record for RAPID MAGNETIC PRINTING OF 3D CELLULAR STRUCTURES USING MAGNETIC CELL BIOINKS (opens in a new tab)

  16. Development of Novel Alginate-Based Bioinks for 3D Bioprinting of Cartilagenous Tissues

    … cartilage injuries. However, the development of bioinks with optimal rheological, mechanical, and biological properties remains a significant challenge. Alginate is a commonly used bioink base polymer and is often prepared by pre-crosslinking with Ca²⁺ prior to extrusion-based bioprinting to …

    ottawa-retro Repository record for Development of Novel Alginate-Based Bioinks for 3D Bioprinting of Cartilagenous Tissues (opens in a new tab)

  17. The use of mechanical foaming for development of bioinks and bioprinting techniques

    … function. However, the low intrinsic porosity of bioinks often falls short in providing an ideal environment for cells. Moreover, many biocompatible hydrogels lack sufficient mechanical and rheological properties for 3D bioprinting. When these properties do not meet the requirements for …

    ets-quebec Download PDF for The use of mechanical foaming for development of bioinks and bioprinting techniques (opens in a new tab)

  18. Development of Novel Bioinks for Studying Multi-Material Architecture within Osteochondral Tissue Engineering

    … of those promising hydrogels into printable bioinks is still a challenge preventing them from being studied for further questions about more biomimetic architectural complexity and 3D structure – questions that a reliably printable system can address. But despite decades of work in these …

    rice Repository record for Development of Novel Bioinks for Studying Multi-Material Architecture within Osteochondral Tissue Engineering (opens in a new tab)

  19. Characterization of Metabolic Glycoengineering in Mesenchymal Stromal Cells for its Application in thermoresponsive Bioinks

    … when they get processed in thermoresponsive bioinks, and a way to increase the cell stiffness via metabolic glycoengineering to attenuate shear forces. For the characterization of the metabolic glycoengineering, four different peracetylated and four non-acetylated modified monosaccharides …

    wurz-thes Repository record for Characterization of Metabolic Glycoengineering in Mesenchymal Stromal Cells for its Application in thermoresponsive Bioinks (opens in a new tab)

Page 1 of 7