Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 19 of 19 for “"Biological fouling"”.
-
Mitigation and Removal of Biological Fouling in a Forward Osmosis Membrane Bioreactor
… difference across the membrane, FO has a lower fouling propensity than other membrane processes, such as reverse osmosis or ultrafiltration, and thus is well-suited for use with wastewater sources containing high organic and biological loads. This work presents in situ cleaning methods for the …
-
Dynamics of biofilm processes in an annular reactor
Biological fouling is a general term referring 1 to the undesirable development of biofilms on surfaces exposed to aqueous environments. In water distribution systems and heat transfer equipment, biological fouling can cause substantial energy losses resulting from increased fluid frictional …
-
An Investigation of the Hydrodynamic Effects of Enteromorpha clathrata Fouling on Hydrofoils
… investigation was to determine the effects of biological fouling on hydrofoils. NACA 4412 and 4415 hydrofoil models with 6 inch chord and 8 inch span were used in this study. A water tunnel facility was designed and constructed to perform the tests, and the results were verified using …
-
Plasma deposited polymeric films for antimicrobial applications
… biomedical devices are highly vulnerable to biological fouling, especially from potentially toxic micro-organisms, such as bacteria. Generally speaking, antimicrobial surfaces can be employed to decrease the risk of microbiological fouling surfaces. This thesis describes versatile methods of …
-
Assessment of ultraviolet light disinfection efficiency of advanced wastewater treatment plant effluent
… that change filter operation conditions. Rapid biological fouling occurred on the off-line banks. Inorganic fouling of on-line banks was minimal. Assuming a worst case UV transmittance (%) and required treatment dosage (mW-s/cm{dollar}\sp2),{dollar} treatment capacity of this 30-foot long, …
-
Prediction, Diagnosis and Prevention of Fouling in Seawater Reverse Osmosis Membrane Systems.
… plant was evaluated using both in-situ fouling monitoring methods and theoretical standardisation and normalisation methods. The results showed that overall performance of the plant deteriorated after 6 months of operation due to fouling. In order to determine the identity and cause of …
-
Microbial control in industrial water recycle systems
… and fungi. These microbes contribute to biological fouling and microbiologically influenced corrosion. These problems contribute to reduced cooling, routine cleaning, equipment replacement, and treatment. To reduce the potential for these problems, an effective microbial control program …
-
Reduction of Trihalomethane Precursors in Caloosahatchee River Water Using Membrane Processes
… is attributable to membrane scaling and/or biological fouling at the membrane surface.
-
Development Of Novel Redox Sensors And Processes Towards Biological Applications
… that can detect various physiological and biological compounds. However, most of these sensors are enzyme based. They have several setbacks such as the lack of sensitivity, restricted selectivity, short shelf life, and biological fouling. To overcome these obstacles, we examine the use of …
-
Biofouling studies on reverse osmosis desalination of hypersaline waters
Biological fouling of reverse osmosis (RO) membranes is affected by many factors, and it is not clearly understood, especially with respect to hypersaline waters. Biofouling minimisation requires understanding of the fundamentals of the biofilm development. It is also necessary to monitor biofilm …
-
Design and Integration of Functional Antimicrobial Nanomaterials into Thin-Film Composite (TFC) Membranes: Toward Tailored Separation and Sustainable Fouling Mitigation
… membrane technology, particularly concerning biological fouling and the removal of persistent emerging contaminants such as perfluorooctanoic acid (PFOA) substances by thin-film composite (TFC) polyamide (PA) membranes. The overall goal is to investigate, synthesize, and optimize nanomaterials …
-
Surface Property Modification of Coatings via Self-Stratification
Biological fouling occurs everywhere in the marine environment and is a significant problem for marine vessels. Anti-fouling coatings have been used effectively to prevent fouling; however, these coatings harm non-targeted sea-life. Fouling-release coatings (FRC) appear to be an alternative way to …
-
Advanced characterisation techniques to assess seawater organic matter removal by dissolved air flotation (DAF)
Membrane fouling in reverse osmosis (RO) systems remains a significant operational issue during seawater treatment for potable applications. Specifically, organic and biological fouling caused by the deposition of dissolved organic matter (DOM) and/or growth of microorganisms in RO systems is a …
-
Engineering tough, hygroscopic, and active hydrogels for surgical simulation and anti-biofouling
… of contexts, including tissue engineering, anti-fouling, drug release, medical devices, and flexible electronics. The usefulness of hydrogels in these contexts stems from their structure, consisting of a 3D cross-linked polymer network containing mostly water. This structure leads to a material …
-
A molecular biological model describing silver nanoparticle mechanism of toxicity and associated antibiotic resistance
… engineered systems and human health. Combating biological contamination in engineered processes is complicated due to the limited number of materials that are both able to impede microbial growth and are benign with respect to human and environmental health. Silver nanoparticles (AgNPs) have …
-
Improving Biocompatibility of Implantable Bioelectronics using Zwitterionic Cysteine
… to the body’s inherent immune response. Surface fouling, rapid oxidation, and fibrous encapsulation are some of the common issues that reduce device performance and lead to device failure. Overcoming these issues becomes especially critical when a bioelectronic is designed for prolonged exposure …
-
Characterization and modification of carbon composite electrodes towards more affordable biosensing applications and integration into fluidic devices
… detection due to their low cost, resistance to biological fouling, large electrochemical solvent windows, and ability to be patterned. However, they often suffer from poor electrocatalytic activity, inability to be molded, and need for complex modifications to effectively detect certain …
-
The effect of aeration and aerator design on the physical, chemical and fertiliser quality of cattle slurry
… prevail, resulting in the breakdown of biological compounds into noxious and toxic chemicals which are of primary concern in environmental pollution. The introduction of large scale anaerobic digesters on every firm is impractical, as extensive supervision of the digester is required. …
-
Functionalized High Aspect Ratio Cellulose Nanocrystal Filled Composites for Gas and Liquid Separations
… the membrane before use and susceptibility to biological fouling. One technique to mitigate issues with TFCs is to utilize the desirable properties of nanoparticles through their incorporation in the TFC selective layer to create thin film nanocomposite membranes (TFNs). CNCs were selected for …