Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 53 for “"Biot number"”.

  1. Laminar flow with an axially varying heat transfer coefficient

    … heat transfer coefficient (or dimensionless Biot number). Since conventional techniques fail for a variable boundary condition parameter, a variable eigenfunction approach is developed. An analysis is carried out for a periodic heat transfer coefficient, which serves as a model for heat …

    vt Repository record for Laminar flow with an axially varying heat transfer coefficient (opens in a new tab)

  2. On Determining Spontaneous Ignition in Porous Materials

    … forms the basis of the approach. The Damkohler number, defined as the dimensionless heat generation parameter for a self-heating body, is described in terms of two key material constants and these materials are related to real incident spontaneous ignition scenarios. The Damkohler number is …

    maryland Repository record for On Determining Spontaneous Ignition in Porous Materials (opens in a new tab)

  3. Developing a model for mass transfer in adsorption packed-bed filters

    … study is carried out in large ranges of Biot number, in order to avoid the influence of convective mass transfer coefficient variations. Indeed it is shown that for large Biot number the controlling parameter is diffusivity within the particles (as anticipated) while, for small Biot …

    concordia Download PDF for Developing a model for mass transfer in adsorption packed-bed filters (opens in a new tab)

  4. Development of experimental techniques and studies of spatial structure in turbulent thermal convection

    … measurements reveal significant finite Biot number effects for water bounded by aluminum.

    uiuc Repository record for Development of experimental techniques and studies of spatial structure in turbulent thermal convection (opens in a new tab)

  5. Understanding the growth and convective instability of mushy layers, with application to young sea ice

    … on the (dimensionless) liquidus gradient and the Biot number. The liquidus gradient describes the ratio of salinity to thermal scales, while the Biot number measures the rate of effective thermal conduction by the surface boundary. This is an aspect which has not previously been considered in …

    oxford Repository record for Understanding the growth and convective instability of mushy layers, with application to young sea ice (opens in a new tab)

  6. Conjugate heat transfer effects on gas turbine film cooling : including thermal fields, thermal barrier coating, and contaminant deposition

    … cooling holes on both an adiabatic and a matched Biot number model turbine vane. The measurements were taken as a comparison to computational simulations of the same model and flow conditions. To improve computational models of the evolution of a film cooling jet as it propagates downstream, the …

    texas Repository record for Conjugate heat transfer effects on gas turbine film cooling : including thermal fields, thermal barrier coating, and contaminant deposition (opens in a new tab)

  7. Experimental and computational investigation of film cooling on a large scale C3X turbine vane including conjugate effects

    … The experimental component used a matched Biot number model to measure scaled surface temperature (overall effectiveness) distributions representative of engine conditions for two new configurations. One configuration consisted of a single row of holes on the pressure surface while the …

    texas Repository record for Experimental and computational investigation of film cooling on a large scale C3X turbine vane including conjugate effects (opens in a new tab)

  8. Ignition Testing of U.S. Army Rocket Launch Tubes with Comparative Heat Transfer Analysis

    … burner for determining the ignition time. The Biot number and heat transfer coefficient was determined. A lumped capacitance method was used to calculate the energy input. The energy input from the rocket plume into the tube was calculated using a semi-infinite solid with surface convection. …

    maryland Repository record for Ignition Testing of U.S. Army Rocket Launch Tubes with Comparative Heat Transfer Analysis (opens in a new tab)

  9. TRANSIENT TEMPERATURE MEASUREMENTS OF COMBUSTOR WALLS ENCLOSING A 2-D MODEL COAXIAL INJECTOR

    … heat transfer analysis applicable for low Biot number and low Fourier number conditions. Infrared thermometry technique was applied to obtain outer wall temperature distribution at three different wall thicknesses, and these measurements were combined with the transient analysis to …

    maryland Repository record for TRANSIENT TEMPERATURE MEASUREMENTS OF COMBUSTOR WALLS ENCLOSING A 2-D MODEL COAXIAL INJECTOR (opens in a new tab)

  10. Uniform heating of thin ceramic slabs in a multimode microwave cavity

    … a TEN03 rectangular cavity modeled in the small Biot number limit and a thin silicon wafer situated in a TM101 cylindrical cavity modeled in the small fineness ratio limit are studied to gain insight into the dynamics of the heating process. The evolution of temperature is governed by a …

    njit Repository record for Uniform heating of thin ceramic slabs in a multimode microwave cavity (opens in a new tab)

  11. Experimental and computational investigation of turbine cooling designs incorporating a thermal barrier coating

    … a TBC. The design and construction of a matched-Biot number test section is discussed along with an evaluation of uncertainty. Enhanced internal cooling was found to provide a 44% increase in overall effectiveness without a TBC. The TBC provided a 47% increase in spatially-averaged effectiveness …

    texas Repository record for Experimental and computational investigation of turbine cooling designs incorporating a thermal barrier coating (opens in a new tab)

  12. Numerical and Experimental Investigation of Single and Two-Phase Impinging Jet Heat Transfer

    … tested numerically e.g. geometric parameters, Biot number, fin structure and presence of a baffle in the jet flow. An experimental set-up was designed to test the thermal performance of single and two-phase impinging jet heat transfer using water and FC-72 as working fluids. For two-phase …

    nus Repository record for Numerical and Experimental Investigation of Single and Two-Phase Impinging Jet Heat Transfer (opens in a new tab) Download file for Numerical and Experimental Investigation of Single and Two-Phase Impinging Jet Heat Transfer (opens in a new tab)

  13. Conjugate Heat Transfer and Average Versus Variable Heat Transfer Coefficients

    … parameter that is varied is a combination of the Biot number and a geometric aspect ratio, A_1^2 = Bi*L^2/d_1^2. The Biot number is assumed small since the problems are one-dimensional and thus variation in A_1^2 is mostly due to a change in the aspect ratio. A large A_1^2 represents a long and …

    byu Repository record for Conjugate Heat Transfer and Average Versus Variable Heat Transfer Coefficients (opens in a new tab) Download PDF for Conjugate Heat Transfer and Average Versus Variable Heat Transfer Coefficients (opens in a new tab)

  14. Evaluation of turbine film cooling holes designed for engine scale additive manufacturing

    … build a scaled-up model of adiabatic and matched Biot number models, which were experimentally tested in a low speed wind tunnel to obtain adiabatic and overall cooling effectiveness data. In addition, computational predictions were performed for the rounded inlet, as-designed hole and compared to …

    texas Repository record for Evaluation of turbine film cooling holes designed for engine scale additive manufacturing (opens in a new tab)

  15. Delayed harvest effects on the moisture sorption properties of soybeans

    … estimates for the theoretical parameters (Biot number and diffusion term) by regression. The diffusion model produced estimates for the moisture ratio that were in very good agreement with the data but were slightly less accurate than those produced by the modified Page equation. The most …

    utk-theses Repository record for Delayed harvest effects on the moisture sorption properties of soybeans (opens in a new tab)

  16. Experimental investigation of the performance of a fully cooled gas turbine vane with and without mainstream flow and experimental analysis supporting the redesign of a wind tunnel test section

    … was measured using a thermally scaled matched Biot number vane with an impingement plate providing the internal cooling. This is the first study focused on investigating the effect of removing the mainstream flow and comparing the contour and laterally-averaged effectiveness data in support of …

    texas Repository record for Experimental investigation of the performance of a fully cooled gas turbine vane with and without mainstream flow and experimental analysis supporting the redesign of a wind tunnel test section (opens in a new tab)

  17. The Stability Properties of Some Rheological Flows

    … temperature gradients, viscous heating and Biot boundary conditions are of particular interest. Both destabilisation and bifurcation phenomenon are found.<br/>For Newtonian constant viscosity flow the instabilities are characterised by a critical Reynolds number which represents the ratio of …

    southwales Repository record for The Stability Properties of Some Rheological Flows (opens in a new tab) Download PDF for The Stability Properties of Some Rheological Flows (opens in a new tab)

  18. HEAT TRANSFER IN A FIXED BED AND MASS TRANSFER IN A COUNTER-CURRENT MOVING BED

    … temperature inside the solid pellets (i.e., the Biot number is zero) and for the case in which there are temperature gradients within the pellets (Bi > 0). For short contact times, beds with Bi > 0 have gas- and solid- temperatures which are greater than the temperatures within beds with Bi = 0. …

    arizona-thes Repository record for HEAT TRANSFER IN A FIXED BED AND MASS TRANSFER IN A COUNTER-CURRENT MOVING BED (opens in a new tab)

  19. Net heat flux reduction and overall effectiveness for a turbine blade leading edge

    … a conducting alumina model meant to match the Biot number of an actual engine airfoil. The results of the heat transfer and adiabatic effectiveness experiments have been combined in the form of net heat flux reduction to quantify the reduction in heat load to the surface caused by the …

    texas Repository record for Net heat flux reduction and overall effectiveness for a turbine blade leading edge (opens in a new tab) Restricted access

Page 1 of 3