Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 52 for “"Bipolar Plates"”.
-
Corrosion of bipolar plates in PEM fuel cells
… corrosion behaviour of candidate coatings for bipolar plates.
-
Flow visualization in 3D printed PEM fuel cell bipolar plates
… and to decrease the pressure drop in the bipolar plates. However, most of the previous studies are in the stage of numerical simulation, and the few experimental studies have used very simple flow field geometries. Not to mention that complex transport phenomena inside a fuel cell make …
-
Thermoplastic Composites for Polymer Electrolyte Membrane Fuel Cell Bipolar Plates
… to investigate alternative materials for PEMFC bipolar plates. Conductive thermoplastic materials offer the promise of low density, low cost processing, and inexpensive resins, and were the focus of material development for PEMFC bipolar plate applications. In order to develop a thermoplastic …
-
Investigation of Graphite Bipolar Plates for PEM Fuel Cell Performance
… cells for automotive applications is due to the bipolar plate. The current graphite material used for the bipolar plate is very brittle and difficult to machine to the rigorous specifications needed for fuel cell stacks. This paper introduces the development of a fuel cell test stand for …
-
The development of PVD coatings for PEM fuel cell bipolar plates
… for polymer electrolyte membrane fuel cell bipolar plates. Due to the multifunctional nature of this particular component a comprehensive approach was used where several key properties were examined for coatings including: ZrN, TiN, CrN, Graphit-iC™, CrN+C, TiN+C and Au. Chemical etching and …
-
Compression/injection molding of bipolar plates for proton exchange membrane fuel cells
… energy to electrical energy efficiently. Bipolar plates form an integral part of a fuel cell and their high manufacturing cost and low production rate have hindered the commercialization of fuel cells. Bipolar plates require high electrical conductivity, strength, chemical resistance and …
-
Studies of the corrosion of materials for bipolar plates in fuel cells
… the corrosion processes of materials for metal bipolar plates in fuel cells based on a poly(benzimidazole) membrane filled with H3PO4. In addition to mild steel, stainless steel, nickel, electroplated Ni and Ni/graphite, the focus was on Ni-Cr alloys and the influence of composition on the rate …
-
Life Cycle Assessment of Bipolar Plates in Fuel Cell Electric Vehicle Applications
… the environmental impact of two types of bipolar plate (BPP) materials used in fuel cell electric vehicles (FCEVs): composite and metallic based BPPs. In total, one steel and four composite BPPs were compared, two biobased and two state-of the-art BPPs. Using the Life Cycle Assessment …
-
The Development of Compression Moldable Polymer Composite Bipolar Plates for Fuel Cells
… manufacture conductive polymer composite bipolar plates for fuel cells. Bipolar plates are required to possess several important properties for fuel cell operation, with the most sought after being electrical conductivity and mechanical strength. The polymer composite material generated at …
-
Design and characterisation of metallic bipolar plates for proton exchange membrane fuel cells
… for proton exchange membrane fuel cells (PEMFC) bipolar plates (BP). However, metals require surface coatings to enhance its corrosion resistance and interfacial contact resistance (ICR) in PEMFC environments. The present study investigated the performance of metals coated with: graphite based …
-
Development of protective coatings for metallic bipolar plates for PEM fuel cell applications
… density currently produced by systems. Metallic bipolar plates have become the standard for modern fuel cell systems but plates often require expensive coatings. For this reason cheaper alternatives to PVD coating were investigated for stainless steel plates. Polyaniline/TiN - TiN bilayer …
-
Bio-inspired design, fabrication and testing of bipolar plates for PEM fuel cells
"The flow field of a bipolar plate distributes reactants for polymer electrolyte membrane (PEM) fuel cells and removes the produced water from the fuel cells. It greatly influences the performance of fuel cells, especially the concentration losses. Two approaches were developed to improve flow …
-
Feasibility study of ultrasonic inspection of thin laser welds on fuel cell bipolar plates
… in thickness. This is especially true for the bipolar plates of the proton exchange membrane fuel cells. They consist of two thin stainless steel laser welded plates. However, laser welding may lead to internal defects, which can cause internal or external leaks. Thus, the development of a …
-
Evaluation of Novel and Low-Cost Materials for Bipolar Plates in PEM Fuel Cells
Bipolar plate material and fabrication costs make up a significant fraction of the total cost in a polymer electrolyte membrane fuel cell stack. In an attempt to reduce these costs, a novel manufacturing method was developed for use with composite materials. Conductive fillers were mixed with a …
-
Development and characterization of electrically conductive thermoplastic based composite materials for fuel cell bipolar plates
… make them potential candidates for fuel cell bipolar plates. The purpose of this study is to develop electrically conductive thermoplastic composites that can be used for the manufacturing of fuel cell bipolar plates. Graphite, Carbon Fiber (CF), Multi-walled Carbon Nanotubes (MWCNT), Carbon …
-
Design and testing of stamped bipolar plates for use in proton exchange membrane fuel cells
Includes bibliographical references (pages 89-93).
-
Investigation of processing and structural properties of cathodic arc deposited carbon-based coatings for bipolar plates
… of a PEMFC are heavily dependent on the metallic bipolar plate which requires a protective and conductive coating to prevent corrosion and provide high electrical conductivity. The aim of this thesis is the development and investigation of carbon-based coatings deposited via cathodic arc …
-
Design, fabrication and testing of graphite bipolar plates for direct methanol fuel cells by indirect laser sintering
… chemical energy into electrical energy. The bipolar plate component of the DMFC is required to be fluid impermeable to prevent fuel leakage and electrically conductive to collect the electrons produced within the cell. Graphite possesses the properties of high electrical conductivity, low …
Page 1 of 3