Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 22 for “"Bitumen emulsion"”.

  1. Diluted bitumen emulsion characterization and separation

    Stable water-in-oil emulsions persist in bitumen froth from surface mining process of Athabasca oil sands because of asphaltenes and clay solids. This dissertation focuses on the characterization and separation of water in diluted bitumen emulsions. A novel approach to process experimental data …

    rice Repository record for Diluted bitumen emulsion characterization and separation (opens in a new tab)

  2. Bounding recycled aggregate pavement mixtures using hydraulic binders and cold bitumen emulsion.

    … environmental impact binders such as bituminous emulsion and industrial by-products as hydraulic binders whilst maintaining a long shelf life presented a further challenge.The primary aim of this research was to investigate methods by which a mixture of recycled aggregate composed of road …

    sheffield-hallam Download PDF for Bounding recycled aggregate pavement mixtures using hydraulic binders and cold bitumen emulsion. (opens in a new tab)

  3. DEVELOPMENT OF NEW COLD BITUMEN EMULSION MIXTURES AND FINITE ELEMENT MODELLING OF PREDICTING PERMANENT DEFORMATION

    … more sustainable flexible pavements. Cold bitumen emulsion mixture (CBEM) as an increasingly attractive cold asphalt mixture is therefore becoming an important subject area for study. Despite the efforts applied during the last few decades to enhance and develop CBEM application, certain …

    liverpool-jm Repository record for DEVELOPMENT OF NEW COLD BITUMEN EMULSION MIXTURES AND FINITE ELEMENT MODELLING OF PREDICTING PERMANENT DEFORMATION (opens in a new tab) Download PDF for DEVELOPMENT OF NEW COLD BITUMEN EMULSION MIXTURES AND FINITE ELEMENT MODELLING OF PREDICTING PERMANENT DEFORMATION (opens in a new tab)

  4. Oil Sands Bitumen Emulsion Upgrading by Using In Situ Hydrogen Generated through the Water Gas Shift Reaction

    Canada has a large reserve of oil sands bitumen which is highly viscous and contains high percentages of asphaltenes and heteroatoms. Currently hot water extraction or steam injection is used in recovering the bitumen as emulsions, which then requires extensive demulsification and water/oil …

    waterloo Repository record for Oil Sands Bitumen Emulsion Upgrading by Using In Situ Hydrogen Generated through the Water Gas Shift Reaction (opens in a new tab)

  5. Development of a New High Performance Cold Mix Asphalt

    … negative impacts on the environment. Cold bitumen emulsion mixtures (CBEMs) are an excellent alternative to traditional HMA, from both an economic and environmental point of views. However, there are certain issues related to the mechanical properties of CBEMs that make them inferior to …

    liverpool-jm Repository record for Development of a New High Performance Cold Mix Asphalt (opens in a new tab) Download PDF for Development of a New High Performance Cold Mix Asphalt (opens in a new tab)

  6. Cement-bitumen treated materials (CBTM) for cold regions: RAP aggregate source and low production temperatures

    … asphalt pavement (RAP). In this context, cement-bitumen treated materials (CBTM) ensure benefits in terms of reliability, cost effectiveness and environmental sustainability. The main difference between CBTM and Hot Mix Asphalt (HMA) is that the lubricant effect in the first is given mostly by …

    ets-quebec Download PDF for Cement-bitumen treated materials (CBTM) for cold regions: RAP aggregate source and low production temperatures (opens in a new tab)

  7. Αξιοποίηση ανακυκλωμένων ελαστικών αυτοκινήτων σε ειδικών εφαρμογών κονιάματα και σκυροδέματα τσιμέντου ή ασφάλτου

    … surface layers and repairing cement mortars with bitumen emulsion. As far as hot mixtures are concerned, such mixtures are produced by the “dry method” and are tested for their suitability for heavy traffic pavements, while their resistance to freezing and thawing is also checked. According to …

    greece Repository record for Αξιοποίηση ανακυκλωμένων ελαστικών αυτοκινήτων σε ειδικών εφαρμογών κονιάματα και σκυροδέματα τσιμέντου ή ασφάλτου (opens in a new tab)

  8. Hydrodesulfurization and Hydrodenitrogenation of Model Compounds Using in-situ Hydrogen over Nano-Dispersed Mo Sulfide Based Catalysts

    … of conventional oil resources. However, bitumen and heavy oils have a low hydrogen/carbon ratio and contain a large percentage of sulfur and nitrogen heterocyclic compounds. At the level of deep desulfurization, aromatic poly-nuclear molecules, especially nitrogen-containing heterocyclic …

    waterloo Repository record for Hydrodesulfurization and Hydrodenitrogenation of Model Compounds Using in-situ Hydrogen over Nano-Dispersed Mo Sulfide Based Catalysts (opens in a new tab)

  9. Fundamental Characterisation of Modified Cold Mix Asphalt Mixtures

    … Furthermore, the interaction between RCP and bitumen emulsion disclosed that RCP does not absorb bitumen, hence maintaining the optimal bitumen content, contributing to the mixture’s cost effectiveness and sustainability. Key findings demonstrate that incorporating 1% RCP into CMA mixtures …

    aston Repository record for Fundamental Characterisation of Modified Cold Mix Asphalt Mixtures (opens in a new tab) Download PDF for Fundamental Characterisation of Modified Cold Mix Asphalt Mixtures (opens in a new tab)

  10. Development of a New Environmentally Friendly Glass Fibre Reinforced Cold Mix Microasphalt with High Resistance to Cracking and Deformation.

    … Apropos to this, the use of cold bituminous emulsion mixtures (CBEMs) for road maintenance is increasingly gaining interest. These mixtures offer advantages in several ways: environmentally friendly, energy saving, cost effectiveness, safety and enhanced production processes. Today in the UK, …

    liverpool-jm Repository record for Development of a New Environmentally Friendly Glass Fibre Reinforced Cold Mix Microasphalt with High Resistance to Cracking and Deformation. (opens in a new tab) Download PDF for Development of a New Environmentally Friendly Glass Fibre Reinforced Cold Mix Microasphalt with High Resistance to Cracking and Deformation. (opens in a new tab)

  11. Assessment of Amount of Emulsion Stabilizers in Oil Sands Bitumen

    In current commercial oilsands bitumen extraction processes, ores of different quality are blended to utilize poorer quality ores and maintain a consistent processibility. The choice and proportion of ores in the blend is guided by the fines content of the ores. However, the processibility does not …

    calgary Repository record for Assessment of Amount of Emulsion Stabilizers in Oil Sands Bitumen (opens in a new tab)

  12. Balance of Forces in Bitumen-particle-water Systems

    … of energy, but must be utilized in a way that bitumen can be extracted economically while it is environmentally responsible. This thesis focuses on three distinct studies on the interaction of bitumen-particle-water systems from a fluid dynamic perspective. The goal of this work is to …

    toronto-retro Repository record for Balance of Forces in Bitumen-particle-water Systems (opens in a new tab)

  13. Treatment of water-in-bitumen SAGD emulsion using solvents and ultrasound energy

    … the in-situ technology most widely used for bitumen extraction in Canada, produces bitumen accompanied by water in the form of a water-in-bitumen emulsion. This emulsion is particularly challenging to treat (break) due to its high viscosity and the presence of solids and natural surfactants …

    calgary Repository record for Treatment of water-in-bitumen SAGD emulsion using solvents and ultrasound energy (opens in a new tab)

  14. Hydrodesulphurization of Light Gas Oil using Hydrogen from the Water Gas Shift Reaction

    … It is combining the two essential processes in bitumen upgrading; emulsion breaking and hydroprocessing into one process. The water in the emulsion is used to generate in situ hydrogen from the Water Gas Shift Reaction (WGSR). This hydrogen can be used for the hydrogenation and hydrotreating …

    waterloo Repository record for Hydrodesulphurization of Light Gas Oil using Hydrogen from the Water Gas Shift Reaction (opens in a new tab)

  15. Influence of Material Composition and Constitutive Representation of Cold Recycled Asphalt Mixtures on Mechanical Response and Pavement Performance

    … shear strength properties of CRM stabilized with bitumen emulsion or foamed bitumen and incorporating cement or hydrated lime were used in M-E analyses performed with KENLAYER design software. The CRM layer was represented using either a linear elastic or a stress-dependent nonlinear constitutive …

    unh-thes Repository record for Influence of Material Composition and Constitutive Representation of Cold Recycled Asphalt Mixtures on Mechanical Response and Pavement Performance (opens in a new tab)

  16. Improving the performance of cold bituminous emulsion mixtures (CBEMs) : incorporating waste

    … exists no universally accepted Cold Bituminous Emulsion Mixtures (CBEMs) design procedure. Three of the most popular design procedures, which in essence were based on AASHTO and the Asphalt Institute design guidelines were studied and tested in detail during the course of this investigation. In …

    whiterose Download PDF for Improving the performance of cold bituminous emulsion mixtures (CBEMs) : incorporating waste (opens in a new tab)

  17. Naphthalene Hydrogenation with Water Gas Shift in Model Oil/Water Emulsion Slurry over Molybdenum Sulfide

    … hydrogenation to tetralin in water/hydrocarbon emulsions with simultaneous water gas shift as the hydrogen source was performed in a 300 ml batch autoclave as a model for aromatic hydrogenation in water/bitumen emulsions. The catalyst utilized was an unsupported and dispersed type based on …

    waterloo Repository record for Naphthalene Hydrogenation with Water Gas Shift in Model Oil/Water Emulsion Slurry over Molybdenum Sulfide (opens in a new tab)

  18. Development of a New Cold Binder Course Emulsion Asphalt

    … These have resulted in the development of cold bitumen emulsion mixtures (CBEMs). However, to date, low early life stiffness, a slower rate of curing, the length of time necessary to achieve full strength, high air void contents and the presence of moisture in these mixtures have prevented them …

    liverpool-jm Repository record for Development of a New Cold Binder Course Emulsion Asphalt (opens in a new tab) Download PDF for Development of a New Cold Binder Course Emulsion Asphalt (opens in a new tab)

  19. HIGH STRENGTH COLD ROLLED ASPHALT SURFACE COURSE MIXTURES

    Cold Bituminous Emulsion Mixtures (BEMs) means manufacturing of asphalt at ambient temperature using bitumen emulsion as the binder. It has been widely utilised in many countries such as the USA and France. The use and development of BEMs were not brought forward in the UK due to the country’s …

    liverpool-jm Repository record for HIGH STRENGTH COLD ROLLED ASPHALT SURFACE COURSE MIXTURES (opens in a new tab) Download PDF for HIGH STRENGTH COLD ROLLED ASPHALT SURFACE COURSE MIXTURES (opens in a new tab)

Page 1 of 2