Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 226 for “"Blade Element"”.

  1. Blade Element Momentum Method for a Counter-Rotating Pump-Turbine

    Blade Element Momentum (BEM) methods are widely used for initial aerodynamic analysis of wind and tidal turbines, as well as aircraft and marine propellers. Mainly because they use less computational resources and can give fairly accurate results. This thesis studies the applicability of such …

    chalmers Repository record for Blade Element Momentum Method for a Counter-Rotating Pump-Turbine (opens in a new tab)

  2. Blade element analysis and experimental investigation of high solidity wind turbines

    … have been used for centuries. The multi-bladed, slowly rotating windpumps developed in the late 1800s are still common all over the world. However their aerodynamic performance is not properly understood because of blade interaction for high solidity operating at very slow speeds. …

    calgary Repository record for Blade element analysis and experimental investigation of high solidity wind turbines (opens in a new tab)

  3. Determination of the blade-element performance of a small transonic rotor.

    The blade-element performance of a small transonic compressor rotor operating at high subsonic speeds is reported. Measurements were made downstream using a small calibrated pneumatic probe, with simultaneous measurements of total pressure, velocity, turning angle, pitch angle, and temperature. In …

    nps Repository record for Determination of the blade-element performance of a small transonic rotor. (opens in a new tab)

  4. Performance Evaluation of Wind Turbine Blades using Blade Element Momentum Theory and Flow Simulation Techniques

    … to evaluate the performance of two wind turbine blades. The first study consisted of a computational flow simulation conducted to predict underperformance of a stall regulated wind turbine rotor. A hypothesis was proposed explaining the causes for the underperformance of an 8kW stall regulated …

    ku Repository record for Performance Evaluation of Wind Turbine Blades using Blade Element Momentum Theory and Flow Simulation Techniques (opens in a new tab)

  5. Evaluation of Acoustic Frequency Methods Coupled to Blade Element Momentum Theory for the Prediction of Propeller Noise

    … encapsulates a range of propeller geometries, blade numbers, microphone locations, tip speeds, and forward Mach speeds. The implemented acoustic models demonstrate good agreement with the experimental data, particularly for the prediction of the maximum tonal noise for which the model based on …

    carleton Repository record for Evaluation of Acoustic Frequency Methods Coupled to Blade Element Momentum Theory for the Prediction of Propeller Noise (opens in a new tab)

  6. The performance estimation of an axial-flow compressor stage using theoretically derived blade element characteristics with experimental comparison

    … flow through a two-dimensional cascade of blades which includes the effects of viscosity. The flow field is divided into two regions; a steady, irrotational core flow modeled by the compressible stream function equation and blade surface boundary layers modeled by the momentum and energy …

    vt Repository record for The performance estimation of an axial-flow compressor stage using theoretically derived blade element characteristics with experimental comparison (opens in a new tab)

  7. Study of Contra-Rotating Coaxial Rotors in Hover: A Performance Model Based on Blade Element Theory Including Swirl Velocity

    … coaxial rotor system. As it is based on the blade element theory, it could be used as a design tool where the engineer can modify all parameters - rotor radius, blade pitch distribution, tip velocity, rotor spacing, number of blades, blade chord, and airfoil's shape through its lift …

    embry-riddle Repository record for Study of Contra-Rotating Coaxial Rotors in Hover: A Performance Model Based on Blade Element Theory Including Swirl Velocity (opens in a new tab)

  8. Evaluation of Flexible Rotor Hover Performance in Extreme Ground Effect

    … influence on a hovering rotor of highly elastic blades in extreme ground proximity has been carried out. This study presents two computational approaches for prediction of elastic blade behavior in ground effect, using finite element analysis (FEM) for deflections while modeling ground effect on …

    maryland Repository record for Evaluation of Flexible Rotor Hover Performance in Extreme Ground Effect (opens in a new tab)

  9. Computational Modeling of Cascade Effect on Blade Elements with an Airfoil Profile

    … ratio is maximized using the method of CFD. The blades of wind turbines are separated by a finite distance in the azimuthal direction. The Blade Element Theory (BET) assumes a blade element to be an airfoil and the blade element is independent to each other; and conducting experiments for low …

    calgary Repository record for Computational Modeling of Cascade Effect on Blade Elements with an Airfoil Profile (opens in a new tab)

  10. Interactive Optimization Programs for Initial Propeller Design

    … with the combined annular momentum theory and blade element theory optimization. Both techniques require preliminary hull and engine design characteristics, but do not necessitate extensive background knowledge of pro- pellers and their calculations. A comparison of the two methods shows the …

    uno Repository record for Interactive Optimization Programs for Initial Propeller Design (opens in a new tab)

  11. Thrust Prediction for a Rotor Operating in a Ship Airwake

    … landing deck. Rotor thrust was computed using blade element methods and compared to direct load cell measurements and to a superposed velocity field. Results show that the blade element method has promise but requires higher fidelity data than was available from the previous coupling study.

    odu Repository record for Thrust Prediction for a Rotor Operating in a Ship Airwake (opens in a new tab)

  12. Controlled diffusion compressor blade wake measurements

    A controlled-diffusion compressor stator blade-element design was re-tested in an academic cascade wind tunnel to obtain data with which to assess viscous computational prediction methods. Tests were conducted near design and toward stall conditions at Mach 0.28 and Reynolds number of 774000. Loss …

    nps Repository record for Controlled diffusion compressor blade wake measurements (opens in a new tab)

  13. Evaluation of Design Tools for the Micro-Ram Air Turbine

    … A rotor model was also developed using basic blade element theory. This model neglected induced flow effects and was therefore expected to over predict rotor torque and power. A second rotor model that includes induced flow effects, the open source program X-Rotor, was also used to predict …

    calpoly Repository record for Evaluation of Design Tools for the Micro-Ram Air Turbine (opens in a new tab)

  14. Aerodynamic design considerations for small-scale, fixed-pitch, horizontal-axis wind turbines operating in class 2 winds.

    … the wind turbine testing procedure. Using blade element theory (BET) and blade element momentum theory (BEMT), wind turbine blades with optimum angle of twist were designed and tested. Results suggest the BEMT-optimized blades will perform better at the design point. The sensitivity of the …

    baylor Repository record for Aerodynamic design considerations for small-scale, fixed-pitch, horizontal-axis wind turbines operating in class 2 winds. (opens in a new tab)

  15. Development of a Simulation and Optimization Framework for Improved Aerodynamic Performance of R/C Helicopter Rotor Blades

    … model main rotor performance in hover using blade element momentum theory and in forward flight conditions employing a blade element theory approach. The forward flight module incorporates empirical induced inflow models and rigid blade motion. Two software packages based on viscous-inviscid …

    carleton Repository record for Development of a Simulation and Optimization Framework for Improved Aerodynamic Performance of R/C Helicopter Rotor Blades (opens in a new tab)

  16. Modeling long term performance of floating offshore wind turbines during wind and wave induced platform motion

    … floating turbine. First, the discrepancy between blade element momentum theory simulations and higher fidelity methods for floating turbines is characterized to better understand which metrics and range of conditions blade element momentum theory is effective for. In addition, the accuracy of …

    oxford Repository record for Modeling long term performance of floating offshore wind turbines during wind and wave induced platform motion (opens in a new tab)

  17. Wind turbine selection : a case-study for Búrfell, Iceland

    … sub-optimal investment. This study applies Blade Element Momentum theory, cost-scaling models and Genetic Algorithms to produce a model that predicts the ideal turbine design for a given site. The model was verified and tested using raw, real-world data from met masts and two Enercon E-44 …

    reykjavik Repository record for Wind turbine selection : a case-study for Búrfell, Iceland (opens in a new tab)

  18. Hydrodynamics of highly-loaded axial flow tidal rotors

    … and consistent study of axial-flow rotors with blade-resolved CFD simulations under different operational conditions including blade deformations, blockage, and transient flow effects.</p> <p>Following the methodological assessment, a hydrodynamic analysis of a parametrically deformed axial-flow …

    oxford Repository record for Hydrodynamics of highly-loaded axial flow tidal rotors (opens in a new tab)

  19. Computer programs for helicopter high speed flight analysis

    … calculator or the IBM 3033 calculator, a blade element method for calculating the total power required in forward, straight and level high speed flight for an isolated rotor. The computer programs consist of a main program which calculates the necessary dynamic parameters of the main rotor …

    nps Repository record for Computer programs for helicopter high speed flight analysis (opens in a new tab)

  20. Aerodynamic Loads On Rotor Blades

    … arise. The aerodynamic loads on the rotor blades are the largest loads acting on a wind turbine. The horizontal wind turbine types of blades are usually made of two or three airfoils such as a propeller. In these types of blades, it is the lift force which makes the rotor turn. The drag …

    chalmers Repository record for Aerodynamic Loads On Rotor Blades (opens in a new tab)

Page 1 of 12