Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 45 for “"Blade Element Theory"”.

  1. Study of Contra-Rotating Coaxial Rotors in Hover: A Performance Model Based on Blade Element Theory Including Swirl Velocity

    … coaxial rotor system. As it is based on the blade element theory, it could be used as a design tool where the engineer can modify all parameters - rotor radius, blade pitch distribution, tip velocity, rotor spacing, number of blades, blade chord, and airfoil's shape through its lift …

    embry-riddle Repository record for Study of Contra-Rotating Coaxial Rotors in Hover: A Performance Model Based on Blade Element Theory Including Swirl Velocity (opens in a new tab)

  2. Interactive Optimization Programs for Initial Propeller Design

    … along with the combined annular momentum theory and blade element theory optimization. Both techniques require preliminary hull and engine design characteristics, but do not necessitate extensive background knowledge of pro- pellers and their calculations. A comparison of the two methods …

    uno Repository record for Interactive Optimization Programs for Initial Propeller Design (opens in a new tab)

  3. The Darrieus wind turbine: An analytical performance study

    … a multiple stream tube concept. The standard blade element theory is applied to each of the stream tubes to calculate the induced flow velocity which is then used to estimate the force on each of the rotor blade elements. A computer model, which can predict the rotor performance with …

    ttu Repository record for The Darrieus wind turbine: An analytical performance study (opens in a new tab)

  4. A Numerical Vortex Approach To Aerodynamic Modeling of SUAV/VTOL Aircraft

    … flowfield. The propeller/slipstream model uses blade element theory combined with momentum conservation equations. This model is expected to be of significant importance in the design of tail-sitter vertical take-off and landing (VTOL) aircraft, where the propeller slipstream is the primary …

    byu Repository record for A Numerical Vortex Approach To Aerodynamic Modeling of SUAV/VTOL Aircraft (opens in a new tab) Download PDF for A Numerical Vortex Approach To Aerodynamic Modeling of SUAV/VTOL Aircraft (opens in a new tab)

  5. Computer code for interactive rotorcraft preliminary design using a harmonic balance method for rotor trim

    … use a common routine, trim.m, which employs blade element theory and a harmonic balance method for rotor trim. The program is limited to conditions of steady flight with no winds and is accurate at a hover and for forward airspeeds greater than or equal to 50 knots.

    nps Repository record for Computer code for interactive rotorcraft preliminary design using a harmonic balance method for rotor trim (opens in a new tab)

  6. Aerodynamic Modeling of a Flapping Membrane Wing Using Motion Tracking Experiments

    … form an analytical aerodynamic model that uses blade element theory and quasi-steady aerodynamics to account for the local twist, stroke angle, membrane shape, wing velocity and acceleration. Results from the aerodynamic model show adequate correlation between the magnitude of lift and thrust …

    maryland Repository record for Aerodynamic Modeling of a Flapping Membrane Wing Using Motion Tracking Experiments (opens in a new tab)

  7. Computational Modeling of Cascade Effect on Blade Elements with an Airfoil Profile

    … ratio is maximized using the method of CFD. The blades of wind turbines are separated by a finite distance in the azimuthal direction. The Blade Element Theory (BET) assumes a blade element to be an airfoil and the blade element is independent to each other; and conducting experiments for low …

    calgary Repository record for Computational Modeling of Cascade Effect on Blade Elements with an Airfoil Profile (opens in a new tab)

  8. Aerodynamic design considerations for small-scale, fixed-pitch, horizontal-axis wind turbines operating in class 2 winds.

    … the wind turbine testing procedure. Using blade element theory (BET) and blade element momentum theory (BEMT), wind turbine blades with optimum angle of twist were designed and tested. Results suggest the BEMT-optimized blades will perform better at the design point. The sensitivity of the …

    baylor Repository record for Aerodynamic design considerations for small-scale, fixed-pitch, horizontal-axis wind turbines operating in class 2 winds. (opens in a new tab)

  9. Optimization of Induced-Power from Dynamic Inflow Theory with Realistic Constraints

    Finite-state induced-inflow theory is used to develop an analytic formulation for general performance of the lifting rotor with arbitrary loading. The theory incorporates conventional blade-element theory for blade lift and provides the integrated loads and the induced-power of the rotor in terms …

    wustl Repository record for Optimization of Induced-Power from Dynamic Inflow Theory with Realistic Constraints (opens in a new tab)

  10. Development of a Simulation and Optimization Framework for Improved Aerodynamic Performance of R/C Helicopter Rotor Blades

    … model main rotor performance in hover using blade element momentum theory and in forward flight conditions employing a blade element theory approach. The forward flight module incorporates empirical induced inflow models and rigid blade motion. Two software packages based on viscous-inviscid …

    carleton Repository record for Development of a Simulation and Optimization Framework for Improved Aerodynamic Performance of R/C Helicopter Rotor Blades (opens in a new tab)

  11. Hydrodynamics of highly-loaded axial flow tidal rotors

    … and consistent study of axial-flow rotors with blade-resolved CFD simulations under different operational conditions including blade deformations, blockage, and transient flow effects.</p> <p>Following the methodological assessment, a hydrodynamic analysis of a parametrically deformed axial-flow …

    oxford Repository record for Hydrodynamics of highly-loaded axial flow tidal rotors (opens in a new tab)

  12. Dynamic inflow model for autorotation

    … in tandem allows large flap displacements of the blades. This behavior is accurately predicted with an analytical model based on modified dynamic inflow and blade element theory. Prior to employing the analytical model on the autorotative decelerator, individual constituents are validated with a …

    texas Repository record for Dynamic inflow model for autorotation (opens in a new tab)

  13. Cascade Effects on Circular Arc Airfoils for Windmill Analysis

    … of the oldest uses of wind energy with the multi-bladed, high-solidity windmill still in widespread use. For the present, solidity can be taken as the projected area of the blades as a fraction of the circular swept area of the rotor. Windmills rotate slowly and have very high solidity, making …

    calgary Repository record for Cascade Effects on Circular Arc Airfoils for Windmill Analysis (opens in a new tab)

  14. Computational studies of the horizontal axis wind turbines in high wind speed condition using advanced turbulence models

    … for modeling the flow phenomena are based on blade element theory, and cannot adequately account for 3-D separated, unsteady flow effects. Therefore, researchers around the world are beginning to model these flows using first principles-based computational fluid dynamics (CFD) approaches. In …

    gatech Repository record for Computational studies of the horizontal axis wind turbines in high wind speed condition using advanced turbulence models (opens in a new tab)

  15. Aerodynamic and Performance Analysis of a Morphing Helicopter Rotor System

    … specifically variable rotor speed and variable blade twist, on various parameters such as the distribution of angle of attack, lift, power, thrust and/or other metrics describing the performance of a helicopter rotor. A MATLAB based blade element theory model was developed and executed for …

    embry-riddle Repository record for Aerodynamic and Performance Analysis of a Morphing Helicopter Rotor System (opens in a new tab)

  16. Development of an Improved Low-Order Model for Propeller-Wing Interactions

    … utilizes several aerodynamic models such as blade element theory and lifting line theory as well as a novel turbulent prop wash model. The final model is shown to provide more accurate results using efficient numerical methods.

    utahstate Repository record for Development of an Improved Low-Order Model for Propeller-Wing Interactions (opens in a new tab)

  17. Development of a Miniature VTOL Tail-Sitter Unmanned Aerial Vehicle

    … The numerical analysis employed a propeller blade-element theory coupled with momentum equations to predict the influence of a propeller slipstream on the freestream flow field, then the aircraft was analyzed using 3-D vortex lifting-line theory to model finite wings immersed in the flow …

    byu Repository record for Development of a Miniature VTOL Tail-Sitter Unmanned Aerial Vehicle (opens in a new tab) Download PDF for Development of a Miniature VTOL Tail-Sitter Unmanned Aerial Vehicle (opens in a new tab)

  18. Effects of a Single Moving Mass on the Dynamics of a Samara-Inspired Vehicle

    … autorotating wing vehicle design. For the model, blade element theory was used to define the forces and moments used for the equations of motion. The results of four case studies demonstrated an ability to laterally displace the samara as well as affect the biased direction of the displacement …

    vt Repository record for Effects of a Single Moving Mass on the Dynamics of a Samara-Inspired Vehicle (opens in a new tab)

  19. Numerical Modeling of the Effects of a Free Surface on the Operating Characteristics of Marine Hydrokinetic Turbines

    … the channel depth, the turbine's hub depth, the blade tip depth and the turbine diameter as potential candidates for a length scale. We use a Reynolds Averaged Navier Stokes (RANS) simulation with a Blade Element Theory (BET) model of the turbine and with a Volume of Fluid model, which is used to …

    washington Repository record for Numerical Modeling of the Effects of a Free Surface on the Operating Characteristics of Marine Hydrokinetic Turbines (opens in a new tab)

  20. Digital Twin Platform for Drone Applications

    … a high-fidelity digital twin, modeled using Blade Element Theory, with parameterized aerodynamic forces tailored to the Quanser QDrone2 and adaptable to other quadrotor architectures. A dedicated Control library, built within the Gazebo ecosystem, facilitates rapid prototyping and …

    york Repository record for Digital Twin Platform for Drone Applications (opens in a new tab)

Page 1 of 3