Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 23 for “"Blast Protection"”.
-
Concrete Masonry Wall Retrofit Systems for Blast Protection
… structures, are particularly vulnerable to blast loads. Facilities that incorporate CMU walls must either be hardened or retrofitted for explosive events. Conventional retrofit techniques that focus on increasing the overall strength of the structure by adding steel or concrete are difficult …
-
Surrogate modelling strategies for the prediction of near-field blast impulse
… to any structure that it impacts on. Structural blast engineers are tasked with designing infrastructure in a way that it is robust enough to withstand extreme loading, whilst dealing with several constraints such as time, cost and space. Due to the variability in initiation conditions (such as …
-
Finite element modeling of energy-absorbing materials in blast-loaded structures
… such as foam or honeycomb are of interest in blast protection because of their ability to absorb energy through plastic deformation. They absorb a considerable amount of energy relative to their low density, and are investigated to determine if their energy absorbing abilities can be used to …
-
Fabrication and Compressive Behavior of Corrugated Aramid-Epoxy Cellular Solids
… A number of cellular solids can provide blast protection and absorb impact energy, but few perform well resisting blunt object (ballistic) penetration. In this thesis, a method is proposed for fabricating cellular solids from aramid-epoxy composites that can absorb impact energy and …
-
Dynamic response of metal-polymer bilayers subjected to blast loading
… coatings, in particular polyurea, for improved blast protection of structures has been reported recently in the literature. The goal of this research is to develop a comprehensive understanding of the reasons for improved performance of coated structures through experimentation and correlation …
-
Response of Two-Way Reinforced Masonry Infill Walls under Blast Loading
… (CSA S850- 12) and American (ASCE 59-11) blast standards. There is an urgent need to investigate and quantify the response of structural components under such extreme loading conditions. This is especially important for masonry components, where research has been limited due to the …
-
Finite element analysis and experimental comparison of doubly reinforced concrete slabs subjected to blast loads
… as an alternative to expensive field testing for blast protection in structures. From the study it was concluded that, both the models gave deflection values that compared well with the experimental results in the normal strength (4 ksi) concrete category. However, the Winfrith Concrete Model …
-
Pressure-impulse diagrams using finite element analysis for reinforced concrete slabs subjected to blast loading
… used in protective structures designed to resist blast events. Blast events subject structures to high pressure and impulse loads. The magnitude of blast load experienced by a structural element is directly related to the exposed area. Hence protection of reinforced concrete slabs and walls, which …
-
On the dynamic crushing of open-cell aluminum foams
… would be encountered for impact mitigation and blast protection applications. An experimental set-up was designed, fabricated and validated for studying the crushing response of cellular materials at high velocities. It consists of a gas gun, a pressure bar, high-speed data acquisition and …
-
Behavior of reinforced concrete column-beam joint subjected to close in blast loads with polyurea and FRP sheets
… concrete (RC) column-beam joint under close-in blast loads using finite element modeling in LS-DYNA with an Arbitrary Lagrangian-Eulerian (ALE) formulation. Failure is captured through element erosion based on maximum principal strain. The study employs concrete with a compressive strength of …
-
Investigation of Blast Load Characteristics On Lung Injury
… are exposed to potentially serious injury from blasts and explosions. Providing insight into the trauma thresholds for blast injury is necessary for the development of blast protection equipment and identification and subsequent treatment of blast injury. [Phillips, 1988] Blast injury can be …
-
Soft Materials under Air Blast Loading and Their Effect on Primary Blast Injury
Injury from blast is significant in both military and civilian environments. Although injuries from blast are well-documented, the mechanisms of injury are not well understood. Developing better protection requires knowledge of injury mechanisms and material response to blast loading. The …
-
New Generation Polymer Concrete Incorporating Carbon Nanotubes
… for bridge deck overlays and for panels used for blast protection.
-
Analysis and design of reinforced concrete wall systems for blast
… wall systems to mitigate the effects of external blast. Sheet retrofits can increase the strength and ductility of the wall and provide a means of fragmentation control. The use of insulated precast/prestressed concrete and insulated tilt-up concrete sandwich panels for exterior walls is common …
-
An innovative protective jacket for structures subject to blast loads: A comprehensive experimental and simulation study
… the development of an effective structural protection system that aids in the preservation of life safety during blast events is an important topic of research in structural engineering. This protection is especially vital for blast and explosion mitigation, where a vehicle-borne bomb or an …
-
Improved Connections for Blast-Resistant Curtain Walls
… façade to modern buildings. When subjected to blast shock waves, curtain walls may suffer significant damage, potentially causing serious injuries and casualties to building occupants. Protective films, laminated glass and strengthening of mullions and transoms are used to protect curtain wall …
-
Blast Performance of Ultra-High Performance Concrete Beams Tested Under Shock-Tube Induced Loads
… and ductility to mitigate against the effects of blast loads to safekeep the public and prevent progressive structural collapse. Recent advancements in structural materials have led to the development of ultra-high-performance concrete (UHPC) with high compressive strength, tensile resistance, …
-
Exploring cross-laminated timber use for temporary military structures: Ballistic considerations
… to construct and provide minimal ballistic and blast protection for occupants. Cross-laminated timber (CLT) is a relatively new prefabricated engineered wood product that is strong, stiff, quick to build, and has the potential to offer inherent ballistic and blast resistance compared to …
-
A path for microsecond structural health monitoring for high-rate nonstationary time-varying systems
… including airbag, debris detection, and active blast protection systems, could benefit from real-time observability for enhanced performance. This task of high-rate state estimation is particularly challenging for real-time applications, where the rate of an observer's convergence needs to be in …
Page 1 of 2