Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 21 for “"Body-Powered"”.
-
Soft Bending Actuator for Body-Powered Application
… develop a soft robotic actuator that leverages body movements to mimic the function of human fingers to perform gripping and grasping tasks. Unlike the predominantly used chamber-based actuation techniques, this study involves braiding fibres along the axis at two different angles on each half …
-
Impact of prehensor stiffness on quality of haptic feedback in body-powered upper limb prostheses
… feedback provided by the prosthesis to the user. Body-powered prostheses, which account for the majority of all upper limb prostheses in use, provide a degree of haptic feedback by default, a consequence of the direct mechanical coupling between the actuating joint and the prehensor. The usually …
-
Navy SEAL Prosthetic Hand
… of upper extremity amputees actively choosing body powered devices. Myoelectric hands utilize a small electric pulse generated in muscles when flexing as a signal to the hand to close. Finger flexion in these devices is controlled by electromechanical servos, requiring no strength input from …
-
Comparison of Augmented Reality Rearview and Radar Head-Up Displays for Increasing Spatial Awareness During Exoskeleton Operation
Full-body powered exoskeletons for industrial workers have the potential to reduce the incidence of work-related musculoskeletal disorders while increasing strength beyond human capabilities. However, operating current full-body powered exoskeletons imposes different loading, motion, and balance …
-
A preliminary protocol for prescribing upper limb prostheses
… showed that metal is better gripped by the body-powered hook than by the myoelectric hand; whereas plastic and wood are better gripped by the myoelectric hand than by the body-powered hook. In addition, as loading rate increases, the friction coefficient decreases. With regard to the …
-
Design and control of a lower-limb exoskeleton emulator for accelerated development of gait exoskeletons
… the design of a novel assistive, multi-joint body-powered leg exoskeleton for hemiparetic gait assistance.
-
Systematic review of neural control and sensory feedback in prosthetic hands
… on the type of prosthetic. Passive, myoelectric, body-powered, electrocorticographic, adaptive, and sonomyographic prosthetic hand devices focus on a variety of hand movements and each utilizes different methods of control. It is also important to consider the biomaterials of prosthetic hands to …
-
Design and Testing of an Externally Powered Elbow Prosthesis
There continues to be a need for an externally powered prothesis which can be used by above elbow amputee patients who cannot effectively operate a conventional body powered prosthesis. This device must be reliable, economically constructed, and easily maintained in the field. A device employing a …
-
Characterizing Mental Workload in Physical Human-Robot Interaction Using Eye-Tracking Measures
… tasks using a dual-armed cobot and a whole-body powered exoskeleton respectively, over multiple trials. Robot-control difficulty was manipulated by changing the joint impedance on one of the robot arms (for the dual-armed cobot). The first study demonstrated that when individuals were …
-
Muscle Activity in Upper Extremity Amputees
… on the type of device participants used, with body-powered prosthetic users activating muscles of the upper arm more frequently than myoelectric prosthetic users. Significance – This dissertation was a preliminary study into novel theories regarding phantom and prosthetic control. Results …
-
Mental Workload Assessment During Upper Limb Prosthetic Training and Task Performance
… as individuals learned to operate either a body-powered (BP) or myoelectric (MYO) bypass prosthesis during a ten session upper limb prosthetic training program. The first two studies examined changes in mental workload and cognitive-motor performance as prosthesis users executed tasks …
-
Characterizing Human Motor Adaptation and Learning When Using Different Occupational Exoskeletons
… were completed. First, adaptation to a whole-body powered exoskeleton was evaluated during stationary load handling. Novice users initially exhibited task completion times approximately 117% longer than experienced users, improving to 59% longer by the third session. Movement smoothness …
-
Craft and the Becoming of Agency: Developing EMBER-S³ to Illuminate Pedagogical Potential
… centred on a green woodworking pole-lathe (a body-powered device that spins wood back and forth so it can be shaped with hand tools) session, combining sensory-first multimodal matrices, annotated video-still storyboards, and sensory–modal density circles, triangulated with stimulated-recall …
-
Modeling Upper Body Kinematics While Using a Transradial Prosthesis
… parallel to the forearm) and the operation of a powered prosthetic hand. Body-powered prostheses, incorporating hooks and other cable driven terminal devices, have even fewer active degrees of freedom. In order to perform activities of daily living, an amputee must use a greater than normal range …
-
Variable Hydraulic Transmissions for Passive Wearable Robots
… be delivered through a passive or active system. Body-powered wearable robots (BPWRs) use passive teleoperated manipulation to transmit the power between different limbs where the power transmission between limbs needs to be at the top speed and force efficiency. Rehabilitation is one of the …
-
Improving the Robustness of Pattern Recognition-Based Myoelectric Prostheses
… degrees of freedom (DoF) over the traditional body-powered prostheses. Myoelectric prostheses rely on the acquisition and processing of signals attributable to muscle activity within the residual limb. This signal is known as the electromyogram (EMG), representing the surface recording of …
-
Design and Testing of a Prototype Prosthesis for Pediatric Upper-limb Transradial Amputees to Provide Adjustable Size and Modular Characteristics
… conducted to develop a financially accessible body-powered upper-limb prosthetic socket that can be adjusted to maintain fit and function for a growing child with a transradial amputation. The main objectives of the study were to design, manufacture, and test a device that was comfortable, …
-
An articulated skeletal analogy of the human upper-limb
… moderately successful archetypes; the cosmetic, body-powered and myoelectric prostheses.</p> <p>Continued development on these archetypes appears to be further separating prostheses into those primarily considered cosmetic and those primarily considered functional. However, amputees have a need …
-
Quantification of Transhumeral Prosthetic Socket Residual Limb Interface Movement Using Motion Capture and a Slip Detection Sensor
Current literature focusing on the prosthetic socket is limited by measurement techniques and modeling assumptions, leading to a limited understanding of the forces and motions occurring between the residual limb and prosthesis and how they can be used to influence socket design and fitting. …
-
Human Body Motions Optimization for Able-Bodied Individuals and Prosthesis Users During Activities of Daily Living Using a Personalized Robot-Human Model
Current clinical practice regarding upper body prosthesis prescription and training is lacking a standarized, quantitative method to evaluate the impact of the prosthetic device. The amputee care team typically uses prior experiences to provide prescription and training customized for each …
Page 1 of 2