Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 20 for “"Boiling characteristics"”.

  1. Nucleate pool boiling characteristics of R-124

    This thesis examines the pool boiling heat transfer characteristics of HCFC-124 and HCFC-124/oil mixtures with up to 10% (by weight) miscible alkylbenzene oil. One smooth and 4 enhanced tubes were tested: a 19 and 26 low integral-fin tube (GEWA-K); a modified finned tube (TURBO-B); and a porous …

    nps Repository record for Nucleate pool boiling characteristics of R-124 (opens in a new tab)

  2. Investigation into the pool-boiling characteristics of gold nanofluids

    … the last five years, work investigating the pool-boiling of these fluids has increased dramatically. However, they have produced some varying results that need further investigation to interpret. An experimental study was performed studying the behavior of gold nanofluids during pool-boiling. It …

    missouri Repository record for Investigation into the pool-boiling characteristics of gold nanofluids (opens in a new tab)

  3. Nucleate Pool Boiling Characteristics From a Horizontal Microheater Array

    Pool boiling heat transfer measurements from different heater sizes and shapes were obtained in low-g (0.01 g) and high-g (1.7 g) aboard the NASA operated KC-135 aircraft. Boiling on 4 square heater arrays of different size (0.65 mm2, 2.62 mm2, 7.29 mm2, 49 mm2) was investigated. The heater arrays …

    maryland Repository record for Nucleate Pool Boiling Characteristics From a Horizontal Microheater Array (opens in a new tab)

  4. Nucleate boiling characteristics of R-113 in a small enhanced tube bundle.

    … the bundle, both the convective and nucleate boiling regions were studied in detail, with emphasis on the 'bundle' effect (i.e. the effect of lower tubes in operation on upper tubes within the bundle). In addition, the effect of surface history and pool height on nucleation site …

    nps Repository record for Nucleate boiling characteristics of R-113 in a small enhanced tube bundle. (opens in a new tab)

  5. Experimental Investigation and Analytical Modeling of Flow Boiling Characteristics in Silicon Microchannel Arrays

    In recent years, research in the field of flow boiling heat transfer at a microscale level has been constantly increasing due to rapid growth of technology applications that require the transfer of heat at high rates in a relatively small space and volume. The present study focuses on the …

    concordia Download PDF for Experimental Investigation and Analytical Modeling of Flow Boiling Characteristics in Silicon Microchannel Arrays (opens in a new tab)

  6. Study of Dual-Tapered Manifold Microgap Spacing and Taper Angle on Pool Boiling Characteristics

    … systems. To improve the performance of the pool boiling system, high critical heat flux and low surface temperatures are desired for efficient heat removal. External structures are one technique that seeks to improve pool boiling performance by passively regulating the flow of vapor away from the …

    rit Repository record for Study of Dual-Tapered Manifold Microgap Spacing and Taper Angle on Pool Boiling Characteristics (opens in a new tab)

  7. Nucleate pool boiling of R-114 and R-114/oil mixtures from single enhanced tubes

    Nucleate pool boiling heat transfer is an integral part of any vapor-compression refrigeration cycle. With a view to improving overall cycle efficiency, the heat transfer performance in the evaporator can be improved by using enhanced boiling surfaces. This thesis looks at the pool boiling …

    nps Repository record for Nucleate pool boiling of R-114 and R-114/oil mixtures from single enhanced tubes (opens in a new tab)

  8. Nucleate pool boiling performance of small High Flux and Turbo-B tube bundles in R-114 oil mixtures

    … of work done at NPS concentrating on the boiling characteristics from small tube bundles sitting in a pool of pure R-114, simulating the evaporator in such a heat exchanger. Two types of commercially available enhanced boiler tubes were used, namely High Flux and Turbo-B. In addition, the …

    nps Repository record for Nucleate pool boiling performance of small High Flux and Turbo-B tube bundles in R-114 oil mixtures (opens in a new tab)

  9. Surrogate Formulation Based on Chemical Functional Group Analysis

    Chemical kinetic characteristics of real fuels exhibit high-dimensional complexity due to the excessive number of molecules and molecular classes. As a method of projecting this high-dimensional complexity, which is pertinent to real fuels, to the low-dimensional description, either a surrogate …

    south-carolina Repository record for Surrogate Formulation Based on Chemical Functional Group Analysis (opens in a new tab)

  10. Mechanical texturing of microporous surfaces to enhance pool boiling heat transfer

    Boiling heat transfer is one of the most promising solutions for the thermal management of systems that require high heat flux removal, presenting orders of magnitude higher heat transfer coefficient than forced liquid convection. Two important aspect of boiling heat transfer is critical heat flux …

    gatech Repository record for Mechanical texturing of microporous surfaces to enhance pool boiling heat transfer (opens in a new tab)

  11. Experimental study of flow patterns, heat transfer, pressure drop and gravitational orientation during flow boiling in minichannels

    … some of these fundamental issues related to flow boiling in small diameter channels and augmenting the understanding of their basic performance characteristics. The present experimental study is undertaken to determine the flow patterns, heat transfer, pressure drop and effect of gravitational …

    rit Repository record for Experimental study of flow patterns, heat transfer, pressure drop and gravitational orientation during flow boiling in minichannels (opens in a new tab)

  12. An SEM surface study of nucleate pool boiling heat transfer to saturated liquid nitrogen reduced pressures from 0.1 to 0.9

    … constituted an examination of both nucleate boiling and maximum heat flux characteristics of liquid nitrogen boiling from characterized surfaces. Several textures of gold plated copper surfaces were studied in addition to silver and silver oxide surfaces. Data were taken over a wide range of …

    must-thes Repository record for An SEM surface study of nucleate pool boiling heat transfer to saturated liquid nitrogen reduced pressures from 0.1 to 0.9 (opens in a new tab)

  13. Characterization of Heat Exchange for Additively Manufactured Components

    … of AM components. Secondly, to improve the pool boiling heat transfer coefficient (HTC) using AM-based structures. Finally, to investigate the application of SLM 3D-printed evaporators in a two-phase loop thermosyphon. To achieve the first objective, a high-accuracy steady-state guarded method …

    york Repository record for Characterization of Heat Exchange for Additively Manufactured Components (opens in a new tab)

  14. Role of surface conditions in the enhancement of heat transfer rates in convective boiling

    … the low heat transfer rates associated with film boiling process. The general method to improve heat transfer rates investigated here was to initiate greater liquid-solid contact in convective film boiling by means of macroroughnened surfaces and the application of coatings. Three types of tubes …

    ut-knoxville Repository record for Role of surface conditions in the enhancement of heat transfer rates in convective boiling (opens in a new tab)

  15. Flow boiling in microchannels of a pumped two-phase loop : experimental and numerical analysis focusing on two-phase flow instability mitigation

    … is to systematically investigate flow boiling in microchannels of a pumped two-phase loop using both numerical and experimental methods. In Chapter 2, a comprehensive thermal-hydraulic flow network model of the P2PL was developed to study the system performance characteristics. While …

    missouri Repository record for Flow boiling in microchannels of a pumped two-phase loop : experimental and numerical analysis focusing on two-phase flow instability mitigation (opens in a new tab)

  16. Boiling Heat Transfer Around a Horizontal Cylinder and in Tube Bundles

    … for a systematic investigation on the boiling heat transfer coefficient to be expected on a 12.7 cm diameter cylinder and a bundle of these cylinders under saturated and subcooled conditions. To accomplish this, a three-part experimental program was instigated.</p> <p>In the first part, …

    mcmaster Repository record for Boiling Heat Transfer Around a Horizontal Cylinder and in Tube Bundles (opens in a new tab)

  17. Flow characteristics and phase interactions of evaporating sprays in gas-solid suspensions

    … In such three-phase flows, the phase transport characteristics are influenced by both droplet-gas interaction and droplet-solid interactions. In dense phase flow, the droplet-solid interaction becomes to play a dominant role in the transport of both spray and gas-solid flow. In very hot …

    njit Repository record for Flow characteristics and phase interactions of evaporating sprays in gas-solid suspensions (opens in a new tab)

  18. Effect of boiling on deposition of metallic colloids

    … the relationship between heterogeneous nucleate boiling surfaces and deposition of suspended metallic colloidal particles, popularly known as crud or corrosion products in process industries, on those heterogeneous sites is investigated. Various researchers have reported that hematite is a major …

    uiuc Repository record for Effect of boiling on deposition of metallic colloids (opens in a new tab)

  19. An experimental study of critical heat flux with surface modification and its analytic prediction model development

    … natures of phenomena, CHF in sub-cooled flow boiling is still an active research topic. This experimental study examines the effects of various operating system conditions including; system pressure, mass flow rate, sub-cooled temperature, and surface wettability upon CHF under sub-cooled flow …

    uiuc Repository record for An experimental study of critical heat flux with surface modification and its analytic prediction model development (opens in a new tab)