Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 92 for “"Boiling-points"”.
-
The boiling points, compositions, and densities of the azeotropes of deuterochloric acid
The boiling points, densities, and compositions of constant boiling deuterochloric acid have been determined at pressures between 200 and 1000 mm. The boiling points, determined with apparatus similar to that used for the determination of the boiling points of hydrochloric acid, were found to …
-
Analysis of E-cigarette Liquids and Aerosols by NMR Spectroscopy: Compositions, Boiling Points, and Degradation Profiles
… to degradation in e-cigarettes, a) the boiling points (i.e. aerosolization temperatures) of propylene glycol (PG) + glycerol (GL) mixtures were determined (+ additives) and b) the effect of sucralose on aldehyde and hemiacetal formation via solvent degradation was explored. 2) Nicotine …
-
A New Type of Apparatus for Measuring Molecular Elevation of Boiling Points: A Study of Its Sustainability for Accurate Work for Laboratory Practices
<p>The problem treated herein has already been treated in some of its phases in another thesis. Frequent reference to this paper will be made in the present paper.</p> <p>The apparatus studied was originally presented by its designer, Dr. J. H. Robertson of the Department of Chemistry of the …
-
A Study of Liquids That Will Not Act on Copper, Nickle or Zinc, Boiling Between 20 Degrees Fahrenheit and 400 Degrees Fahrenheit
<p>The subject of the boiling point of liquids and their action on metals opens a wide field in chemistry. Almost every chemist has made a study of the boiling point of liquids and some have devoted a large portion of their time to it. The boiling points, and some of the other peculiarities of …
-
A Study of the Distillation of Various Binary Mixtures
… will give minimum and which maximum curves of boiling points.
-
Gas chromatographic determination of water in organic compounds and of organic compounds in water after steam distillation
… column. The recovery of most compounds with boiling points from 77 to 238°C is better than 90% and a concentration effect of ten is realized. This method is very effective for phenols which traditionally have been difficult to distill;When compounds are present at concentrations in the …
-
Effects of age on toxicity to freshwater algae of water soluble extracts of No. 2 fuel oil
… di-aromatic and tri-aromatic compounds, having boiling points higher than naphthalene,are still in the medium after 8 days. Sixteen component compounds were chosen for chemical analysis and toxicity testing. The concentrations of these compounds in the fresh-prepared , 4-day-aged and 8-day-aged …
-
Relationships between some properties of pure homologous organic liquids
… Hg. These data were obtained by determining the boiling points of the pure materials at various pressures by using differential thermal analysis. The boiling points were determined with a precision of -.1 degree Centigrade at a 95 per cent C.I. The Antoine equation was used to analytically …
-
Solvents for Use in the Extractive Distillation of Piperylene Concentrate
… which gives the best separation of the lowest boiling and highest boiling points of the key components in the mixture. In this study twenty solvents and solvent mixtures were tested. Acetonitrile was found to be the most effective solvent and nitromethane the next most effective.
-
The Detection and Identification of Explosives by Canines and Chemical Instrumentation
… is an exponential relationship between relative boiling point and evaporation rate. It has been determined that compounds with higher boiling points have lower evaporation rates than compounds that have lower boiling points. The materials studied thus far are known odor compounds produced by …
-
Capture and recovery of organic gases with electrothermal swing adsorption and post-desorption treatment
… manufacturing, use liquefied organic gases (boiling points (Tb) < 20°C) as inert feedstocks. These processes produce low concentration (e.g., 2,000 ppmv) organic gas streams that must be treated to prevent emissions of the organic gases to the atmosphere. The organic gases are typically not …
-
Pyrolysis and oxidation of chloromethanes experiment and modeling
… additivity formalism to estimate the normal boiling points has been developed because boiling points are important to calculate critical properties needed for flame modeling. The model is straightforward and applies to compounds with a wide range of molecular weight, varied functional groups, …
-
Vapor-Liquid Phase Equilibria Using Monte Carlo Wang-Landau Simulations
… HMC technique with the WL sampling. The standard boiling points of n-alkanes such as eicosane, tetracosane and triacontane are simulated by implementing the CBMC technique in the WL method in order to sample efficiently the various conformations of the long chain molecules. For copper we obtain a …
-
A Modified Micro Isoteniscope for Measuring Vapor Pressure
… properties. They are used in the correction of boiling points and in the recovery of solvents. The concentration of vapor in the gas phase may be regulated effectively by controlling the temperature of the liquid. Humidity conditions, which are so important in many manufacturing processes, …
-
An Investigation of the Reduction of Carbon-Carbon Unsaturation by Alkali Metals in Liquid Ammonia
… Evidence of hydrogen bonding as reflected in boiling points is shown in Table I. The dielectric constant is 22 at -33° which is also very high for a solvent which is comparatively inert to reactive metals. (Hexane has a dielectric constant of 1.87.) Liquid ammonia is a much better solvent for …
-
The Saponification and Chlorine Determination of Alkyl Chlorobenzoates to Determine Their Identity and Purity
… in literature were prepared and their melting points and boiling points and refractive indices determined. In order to give an indication of the identity and purity ot the esters synthesized, saponitication equivalents and per cent chlorine determinations are necessary. The work of this …
Page 1 of 5