Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 72 for “"Bolometers"”.
-
Cold-Electron Bolometers
… thesis concerns the fabrication of Cold-Electron Bolometers (CEBs) with shadow angle evaporation technique, suitable for measuring the Cosmic Microwave Background Radiation as a part of the BOOMERanG project. We have studied two possible improvements of the absorber. Firstly, we have decreased the …
-
Fabricating silicon mesh bolometers for BAM
… given, although preliminary attempts to produce bolometers have been unsuccessful.
-
Group IV Mid-infrared waveguide-based bolometers
… the investigation of MIR waveguide integrated bolometers. <br/><br/>The first uncooled silicon waveguide-based bolometers in the Silicon-on-Insulator (SOI) and suspended silicon waveguide platforms are presented in this thesis. The bolometers comprise gold plasmonic antennas on the waveguide …
-
Ultrasensitive bolometers as detectors of single quanta
… external fields. We then dive into the world of bolometers, traditionally known for their effectiveness in photon detection. We consider their underutilized potential in the detection of electrons and their integration into more complex systems. Through qubit readout experiments and the …
-
Rare Event Searches With CUORE Style TeO2 Bolometers
… performed, via the axioelectric effect in TeO2 bolometers, in the CUORE-0 experiment. Both axion searches are performed in the scope of the DSFZ invisible axion model. An upper bound on the axion-electron coupling constant of gae ≤ 3.1 x 10-11 (95% CL) is obtained with 62.7 kg days of TeO2 …
-
Investigation of YBCO bolometers for THz wave detection
… about the fabrication and char- acterization of bolometers based on thin films of YBa2Cu3O7−δ dedicated for detection of radiation in the THz-regime. A cleanroom process was developed to fabricate antenna-integrated bolometers on Al2O3 substrates. This process is described in detail to enable …
-
Characterization, Optimization, and Operation of TES Bolometers for EBEX
… a kilopixel array of transition edge sensor bolometers. I worked with the fabrication team at UC Berkeley to modify and optimize the bolometer design for the space-like environment at a float altitude of 36 km. The detector characterization measurements, I performed in test cryostats and in …
-
Nanosecond Response-Time. Room Temperature Infrared Detection With Thin-Film Metal Bolometers
Made available in DSpace on 2014-12-10T19:07:11Z (GMT). No. of bitstreams: 1 7317507.pdf: 3838764 bytes, checksum: 2eb23bc60eec68cc83f66205b2e85087 (MD5) Previous issue date: 1973
-
Feedback-controlled transition-edge sensor bolometers in a far-infrared double-Fourier interferometer
… of feedback-controlled transition-edge sensor bolometers. To fully understand measurements made with the interferometry testbed and ensure that these are well-calibrated, the detector system must be understood and characterised at a technical level. The detector array itself is a bespoke system …
-
Thermal Imaging by Means of an Electron Beam Addressed Array of Infrared Bolometers
Made available in DSpace on 2014-12-12T20:54:37Z (GMT). No. of bitstreams: 1 7726679.pdf: 3083748 bytes, checksum: 9724b82574d5175e58e74c6d511a1989 (MD5) Previous issue date: 1977
-
Analysis and comparison of resistive, ferroelectric and pyroelectric uncooled bolometers for electronic imaging systems
… resistive, pyroelectric and ferroelectric bolometers. In this thesis research, the dependence of R_v, D* and total noise on these key parameters were analyzed and written as equations from which computer calculations could easily be made. The analyzed results were used to compare the …
-
Electromagnetic and Quasi-Optical Analysis of Cavity Coupled Bolometers for Far-Infrared and Terahertz Receivers
The primary concern of this thesis is the development of theoretical and computational techniques for the modelling of cavity coupled bolometric detectors for future millimetre wave and terahertz astronomical receivers. Hypersensitive bolometer based receivers will be required to answer current …
-
Room Temperature VOx Air-Bridge Bolometer integrated with Metal-Insulator-Metal Resonant Absorbers
Spectrally-selective un-cooled micro-bolometers have many military and industrial applications for infrared sensing and imaging, e.g. target acquisition and chemical analysis. In this work, a micro-bolometer was fabricated with integrated wavelength-selective absorber based on subwavelength …
-
A THz focal plane imaging array using metamaterial-inspired bolometer and wafer-level integrated focusing elements
… arrays such as Schottky diode rectifiers and bolometers. A typical focal plane array (FPA) pixel element consists of a read-out circuitry, detector device and an antenna or a lens element. A 100×100 element FPA will require 10,000 of these individual elements. Pick-and-place of such a large …
-
Antenna coupled infrared detectors for wavelength selectivity or broadband absorption
… diverse designs to achieve multi-color imaging, bolometers in parallel, vertically stacked bolometers, tuning by changing the distance between bolometric layer and mirror, tuning by lithographically drawn parameters, and so on. We also present thermally improved bolometer arrays to improve …
-
PSICE modelling and parametric study of microbolometer thermal detectors
… generic RC circuit. As such, circuits containing bolometers can be analyzed with standard circuit simulation programs such as PSPICE. This thesis deals with the development of a bolometer model by using PSPICE with the aid of Analogue Behavior Modeling (ABM) capability, which allows the user to …
-
Bolometric detectors for EBEX: a balloon-borne cosmic microwave background polarimeter.
… operate transition edge sensor (TES) bolometers readout by superconducting quantum interference devices (SQUIDs) from a balloon platform. We present the EBEX instrument design, review TES bolometer and SQUID theory of operation and elaborate on frequency domain multiplexing. Following …
-
Optical Designs and Antireflection Coatings for CMB Instruments
… the optical design, antireflection coatings, and bolometers used in these polarimeters. I designed and analyzed Gregorian, Crossed, and Open Dragone CMB telescopes as a member of the EBEX, CORE, and PICO projects. The Open Dragone I developed for PICO is the first use of this optical system in a …
-
Thermal boundary resistance in YBCO THz microbolometers at room temperature
… responsible for the response and speed of these bolometers. Two parameters are varied that we believe could affect this thermal resistance. The first parameter is the thickness of the CeO2 buffer layer. This layer is situated between the YBCO layer and the sapphire substrate. Its purpose is to …
-
Laser-controlled synthesis and manipulation of carbon nanotubes
… nanoantenna arrays were fabricated for infrared bolometers. We showed that strong concentration of optical fields and the small volume of CNTs in the gaps of the nanoantenna arrays resulted in an enhanced light-CNT interaction and hence improved photoresponse of the bolometers. Due to the …
Page 1 of 4