Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 96 for “"Bond Behavior"”.

  1. Bond behavior of reinforced concrete under impact loading

    … thesis covers experimental investigations of bond behavior of reinforced concrete specimen under impact loading. A computer assisted data acquisition system was selected for data acquisition and control. This entire electronic system involved mainly a multichannel digital oscilloscope and an …

    njit Repository record for Bond behavior of reinforced concrete under impact loading (opens in a new tab)

  2. Bond behavior of lightweight steel fibre-reinforced concrete

    This research was undertaken for studying the bond behaviour of Lightweight Fibre-reinforced Concrete (LWFC). Lightweight concrete is inherently weak in tension and has higher brittleness than the conventional concrete. To improve these and other properties, it is generally reinforced with deformed …

    qucosa-diss

  3. Bond behavior of advanced fiber reinforced composite-concrete joints

    “Externally bonding advanced composite materials to concrete structures is an effective way to improve their strength, ductility, and durability. The interfacial bond behavior is fundamental to understand the overall structural performance of concrete structures strengthened with advanced composite …

    must-thes Repository record for Bond behavior of advanced fiber reinforced composite-concrete joints (opens in a new tab)

  4. Bond Behavior of Post-Installed GFRP Bars in Structural Connections

    … all of the specimens with post-installed GFRP. Bond strengths and peak applied loads improved by increasing concrete strengths and embedment depths. The larger diameter bars (#6 and #8) showed a loss of bond strength compared to #4 bars.

    umn Repository record for Bond Behavior of Post-Installed GFRP Bars in Structural Connections (opens in a new tab)

  5. Bond Behavior of Fiber Reinforced Polymer Bars Under Hinged Beam Conditions

    The research provided in this report examines the behavior of fiber reinforced polymer (FRP) reinforcing bars, embedded in normal weight concrete (NWC) hinged beam-end specimens, tested in accordance with two laboratory conditions. Reinforcing bars of different diameter, material configuration, and …

    calpoly Repository record for Bond Behavior of Fiber Reinforced Polymer Bars Under Hinged Beam Conditions (opens in a new tab)

  6. BOND BEHAVIOR OF EPOXY-COATED REINFORCING BARS IN NON-PROPRIETARY UHPC

    … properties, compressive strength, and effect on bond strength using a modified pullout test and the ASTM A944 beam-end test for No. 5 uncoated, ASTM A755 epoxy-coated, and ASTM A1124 textured-epoxy-coated reinforcing bars. The UHPC mixture with the best properties was used to cast a closure strip …

    ku Repository record for BOND BEHAVIOR OF EPOXY-COATED REINFORCING BARS IN NON-PROPRIETARY UHPC (opens in a new tab)

  7. BOND BEHAVIOR BETWEEN STEEL AND HIGH MODULUS CFRP PLATES AT MODERATLEY ELEVATED TEMPERATURES

    … elevated temperatures, up to 50oC, on the bond behavior of steel beams strengthened with externally bonded carbon fiber reinforced polymer (CFRP) plates. In the first phase of the research, five steel-CFRP bonded double-lap shear coupons were tested at different temperatures to characterize …

    houston Repository record for BOND BEHAVIOR BETWEEN STEEL AND HIGH MODULUS CFRP PLATES AT MODERATLEY ELEVATED TEMPERATURES (opens in a new tab)

  8. Bond behavior of cement-based repair materials under freeze-thaw and cyclic loading conditions

    … freezing and thawing cycles adversely affect the bond between substrate concrete and repair materials, which lowers the structural capacity of repaired structures. So far, researchers have found that bond strength of repair can be affected by surface roughness, surface moisture, chemical adhesion …

    uvic Repository record for Bond behavior of cement-based repair materials under freeze-thaw and cyclic loading conditions (opens in a new tab)

  9. Effect of Radiation on Bond Behavior Between Concrete and Steel Bar: Development of Experimental Protocol

    … a need to assess the effect of radiation on the behavior of bond strength between steel reinforcement and concrete. However, there is geometrical constraints in the cylindrical capsule which limit the size of concrete samples. Thus, developing a protocol to produce pullout sample and a test setup …

    ut-knoxville Repository record for Effect of Radiation on Bond Behavior Between Concrete and Steel Bar: Development of Experimental Protocol (opens in a new tab)

  10. Bending and bond behavior and design of concrete beams reinforced with fiber-reinforced plastic rebars

    … twenty-four cantilever specimens subjected to bond forces, and twelve straight pull-out specimens. The following response of concrete beams reinforced with FRP rebars were investigated: pre- and post-cracking behavior, load-deflection and stress variations, elastic and ultimate load carrying …

    wvu Repository record for Bending and bond behavior and design of concrete beams reinforced with fiber-reinforced plastic rebars (opens in a new tab)

  11. Evaluating the Bond Behavior Between FRP and Grooved Concrete Specimens Using Single Shear Pull Out Test

    Surface preparation affects the bond behavior between Fiber Reinforcing Polymer (FRP) composite material and concrete. In this research, a special type of surface preparation known as grooving, which involves cutting transverse grooves, is conducted on concrete blocks (specimens) that are …

    marquette Repository record for Evaluating the Bond Behavior Between FRP and Grooved Concrete Specimens Using Single Shear Pull Out Test (opens in a new tab)

  12. Investigation of compressive bond behavior of steel and fiber reinforced polymer bars embedded in recycled aggregate concrete

    … and ultimate limit states is controlled by the bond between reinforcement and concrete which is a critical design parameter. This research aims to evaluate RCA application in structural concrete and investigate the bond properties between reinforcing steel/FRP bars and RCA concrete. Bond …

    ubc Repository record for Investigation of compressive bond behavior of steel and fiber reinforced polymer bars embedded in recycled aggregate concrete (opens in a new tab) Download PDF for Investigation of compressive bond behavior of steel and fiber reinforced polymer bars embedded in recycled aggregate concrete (opens in a new tab)

  13. GFRP Bars in Concrete toward Corrosion-free RC Structures: Bond Behavior, Characterization, and Long-term Durability Prediction

    … Comprehensive understanding of the bond between GFRP bars and concrete, in particular under in-service conditions or extremely severe events, enables scientists and engineers to provide their proper design, assessment and long-term predictions, and ultimately to implement them toward …

    ndsu Repository record for GFRP Bars in Concrete toward Corrosion-free RC Structures: Bond Behavior, Characterization, and Long-term Durability Prediction (opens in a new tab)

  14. Bond behavior of FRP-to-concrete under cyclic fatigue loading of RC structures strengthened with EB-FRP composites

    … strengthening systems. The use of externally bonded (EB) fiber reinforced polymer (FRP) composites features numerous advantages and is a promising technology for shear strengthening of RC structures. However, the performance of EB-FRP retrofitted concrete structures can be highly influenced by …

    ets-quebec Download PDF for Bond behavior of FRP-to-concrete under cyclic fatigue loading of RC structures strengthened with EB-FRP composites (opens in a new tab)

  15. Effect of FRCM Repair on the Bond Behavior of Corroded Reinforced Concrete Beams Subjected to Static and Cyclic Loading

    … Matrix (FRCM) repair in improving the bond behavior of corroded reinforced concrete beams under both static and fatigue loading. The study consisted of 30 full-scale beams, both corroded and uncorroded. The variables used in this study were corrosion level based on mass loss, repair …

    umn Repository record for Effect of FRCM Repair on the Bond Behavior of Corroded Reinforced Concrete Beams Subjected to Static and Cyclic Loading (opens in a new tab)

  16. Durability analysis of bond between composite materials and masonry substrates

    … externally applied, depends on the long-term bond behavior between these materials and the masonry substrate, but research in this area is still very limited. The main purpose of this thesis is to create a basis for a general approach to durability of masonry components strengthened with …

    minho-thes Repository record for Durability analysis of bond between composite materials and masonry substrates (opens in a new tab)

  17. Strengthening of steel bridge components with externally bonded ultra-high modulus CFRP

    The application of the externally bonded (EB) carbon fiber reinforced polymer (CFRP) technique for retrofitting civil infrastructure has been increasingly gaining acceptance and market share. However, investigations on the performance of steel components strengthened or rehabilitated with EB CFRP …

    ets-quebec Download PDF for Strengthening of steel bridge components with externally bonded ultra-high modulus CFRP (opens in a new tab)

  18. Effects of Peel Angle and Strain Rate on the Bond Between FRCM Composite and Concrete Substrate

    … procedure depends on the quality of the bond between the external reinforcement and the substrate, ensuring efficient stress transfer and enabling the system to reach its ultimate capacity without premature debonding. While research has focused on the bond performance of FRCM systems …

    sdstate Repository record for Effects of Peel Angle and Strain Rate on the Bond Between FRCM Composite and Concrete Substrate (opens in a new tab)

Page 1 of 5