Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 87 for “"Bond Performance"”.

  1. Bond Performance of High-Capacity Strands in High Strength Concrete

    … forms. To date, the information regarding the bond performance of 18-mm-diameter (0.7-in.) prestressing strand is very limited, preventing its application despite its attractive high-strength. Also, our understanding of the bond mechanism is incomplete and non-quantitative; a rational …

    utk-theses Repository record for Bond Performance of High-Capacity Strands in High Strength Concrete (opens in a new tab)

  2. Early age shrinkage and bond performance of UHPC in shear keys

    Ultra-high-performance concrete (UHPC) is a cementitious material with a substantially higher mechanical capacity and durability than conventional concrete. The enhanced compressive strength (over 120 MPa) and high tensile capacity of UHPC make it unique compared with other types of concrete. …

    manitoba Repository record for Early age shrinkage and bond performance of UHPC in shear keys (opens in a new tab)

  3. Crack Control and Bond Performance of Alternative Coated Reinforcements in Concrete

    … reinforced concrete structures is related to the bond strength developed between the bar and the concrete. It also depends on an ability of the bar to resist the stresses due to shrinkage to minimize the crack. Another important aspect is the resistance offered by the reinforcement to minimize the …

    clemson Repository record for Crack Control and Bond Performance of Alternative Coated Reinforcements in Concrete (opens in a new tab)

  4. Investigating the Surface Energy and Bond Performance of Compression Densified Wood

    The bond performance and surface energy of hygro-thermal compression densified wood were studied using comparisons to hygro-thermally treated and control yellow-poplar (Liriodendron tulipifera). Bond performance was studied using opening mode double cantilever beam fracture testing and cyclic …

    vt Repository record for Investigating the Surface Energy and Bond Performance of Compression Densified Wood (opens in a new tab)

  5. Effect of corroded reinforcement in RC structures: from cracking to bond performance

    … because of the oxides formation; therefore, bond between the materiala changes. In the present dissertation, steel reinforcement corrosion and its mechanical implications were studied; in particular, the investigation was developed both experimentally and numerically. As far as the former is …

    poli-torino Repository record for Effect of corroded reinforcement in RC structures: from cracking to bond performance (opens in a new tab)

  6. Plasma Surface Functionalization of AFP Manufactured Composites for Improved Adhesive Bond Performance

    High-performance composite structures not only require a reliable fabrication process when creating primary structures, but also a high fidelity and repeatable bonding process for the assembled components. During the assembly process, surface contaminants are a major concern as they have the …

    south-carolina Repository record for Plasma Surface Functionalization of AFP Manufactured Composites for Improved Adhesive Bond Performance (opens in a new tab)

  7. Bond Performance between Corroded Steel and Recycled Aggregate Concrete Incorporating Nano Silica

    … aims to investigate the corrosion resistance and bond performance of steel reinforced recycled aggregate concrete incorporating nano-silica under both normal and corrosive environmental conditions. The experimental part includes testing of 180 pull-out specimens prepared from 12 different …

    bradford Repository record for Bond Performance between Corroded Steel and Recycled Aggregate Concrete Incorporating Nano Silica (opens in a new tab)

  8. A study of the bond performance of brickwork triplets made using modified mortar

    … many factors, but current research indicatesthat bond quality is the primary factor. The bond strength is a key parameter representingstructural integrity and water-tightness of the masonry system. However, masonry ischaracterized by low bond strength, and is quite a complex material to analyse …

    salford Download PDF for A study of the bond performance of brickwork triplets made using modified mortar (opens in a new tab)

  9. Investigation into the effect of Peel Ply surface preparation on adhesive bond performance

    … is directly proportional to the quality of its bonding surface. One element influencing the quality of the bonding surface is the surface preparation before adhesive application. There are various methods to prepare a surface before a bond is applied, such as mechanical, chemical, and physical …

    nwu-za Repository record for Investigation into the effect of Peel Ply surface preparation on adhesive bond performance (opens in a new tab)

  10. Evaluating the Effect of Defects on CFRP-Concrete Bond Performance: Experimental and Analytical Insights

    … of this repair technique depends largely on its bond performance and interfacial quality, which ensure the structural integrity and reliability of the strengthening solution. A gap currently exists in efficiently investigating bond integrity in the presence of interfacial deteriorations and …

    ottawa-retro Repository record for Evaluating the Effect of Defects on CFRP-Concrete Bond Performance: Experimental and Analytical Insights (opens in a new tab)

  11. Early age and durability study of the bond strength on the interface between UHPC – HSC

    This thesis explores the bond performance of the interface between UHPC and high strength concrete. The aim of the experimental work is to define some of the transverse shear transfer parameters, such as the cohesion and friction coefficient at the interface between the shear key filler material …

    manitoba Repository record for Early age and durability study of the bond strength on the interface between UHPC – HSC (opens in a new tab)

  12. Distributed Fibre Optic Strain Sensing to Monitor Deterioration in Reinforced Concrete

    … stiffening and to develop insights into the bond performance of reinforced concrete. It was found that FOS could be used to measure the distributed reinforcement strain, especially before cracking occurs, and these results illustrate how the bond deteriorates with increasing load. In …

    queens Repository record for Distributed Fibre Optic Strain Sensing to Monitor Deterioration in Reinforced Concrete (opens in a new tab)

  13. Discrete element method-based chip seal application in asphalt pavement maintenance

    … asphalt application ratio in chip seal and its performance under different conditions. Specifically, the lack of a test method for chip seal's tensile and shear bond performance contributes to this uncertainty. Therefore, the primary objective of this dissertation is twofold: firstly, to develop …

    mtu Repository record for Discrete element method-based chip seal application in asphalt pavement maintenance (opens in a new tab)

  14. Compatibility of ultra high performance concrete as repair material : bond characterization with concrete under different loading scenarios

    … for widespread acceptance, durability and performance of the composite system must be fully understood, specifically the bond between UHPC and NSC often used in bridge decks. It is essential that the bond offers enough strength to resist the stress due to mechanical loading or thermal …

    mtu Repository record for Compatibility of ultra high performance concrete as repair material : bond characterization with concrete under different loading scenarios (opens in a new tab)

  15. The effect of molar ratio and pH during synthesis on the performance of phenol-melamine-formaldehyde adhesives

    … which can satisfy a wide range of working and performance property demands of the users. PF resins suffer from a few disadvantages which include the distinct dark brown color in the cured glueline and the relatively high temperature (120°C at glueline) required for curing. Modification of PF …

    ubc Repository record for The effect of molar ratio and pH during synthesis on the performance of phenol-melamine-formaldehyde adhesives (opens in a new tab) Download PDF for The effect of molar ratio and pH during synthesis on the performance of phenol-melamine-formaldehyde adhesives (opens in a new tab)

  16. Behavior and temporal-based effects of sustainable self-consolidating concrete in bridge structures

    … objective of this study was to investigate the performance of sustainable self-consolidating concrete (SCC) for highway bridge structures. Two types of concrete were utilized in this study: high volume fly ash-self consolidating concrete (HVFA-SCC) and high strength-self consolidating concrete …

    must-thes Repository record for Behavior and temporal-based effects of sustainable self-consolidating concrete in bridge structures (opens in a new tab)

  17. The Influence of Corrosion Mitigating Fluids on Post Tensioned Tendon Grout Properties and Steel to Grout Bond Strength

    … to arrest corrosion. However, it compromised the bond strength between the steel and the strand. For that reason, this study aims to identify a fluid that can be impregnated into the interstitial spaces without sacrificing bond performance. The most promising fluid found in the study is an …

    usf Repository record for The Influence of Corrosion Mitigating Fluids on Post Tensioned Tendon Grout Properties and Steel to Grout Bond Strength (opens in a new tab)

  18. Variation of transfer bond in concrete under lateral restraint

    … study of the effects of lateral restraint on the bond behaviour of reinforcement bars. Bond performance of three types of deformed bars, namely Torbar, Hybar and Square-twisted bars has been investigated experimentally both under varying levels of lateral tension release and lateral compression. …

    city-london Download PDF for Variation of transfer bond in concrete under lateral restraint (opens in a new tab)

  19. Shear strengthening of concrete beams with embedded frp bars

    … and high-rise buildings. The thesis examines the bond performance of the deep embedment (DE) technique, also known as the embedded through-section technique (ETS), which utilises fibre reinforced polymers (FRP) bars embedded into concrete using an epoxy adhesive. The bond-slip experimental results …

    birmingham Download PDF for Shear strengthening of concrete beams with embedded frp bars (opens in a new tab)

Page 1 of 5