Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 152 for “"Bond-Slip"”.

  1. Shear-bond slip criteria for composite steel deck slabs

    … lack of focused study regarding interfacial slip between concrete and steel surfaces in composite steel slabs, pertaining to shear-bond capacity and the ultimate shear strength of deck slabs, invites consideration of slip behavior along the length of slab specimens. In particular, slip …

    iastate Repository record for Shear-bond slip criteria for composite steel deck slabs (opens in a new tab)

  2. Effect of Construction Contaminants on the Bond-Slip Behaviour of GFRP Reinforcing Bars

    … the impact of surface contamination on GFRP bond behaviour using pullout specimens. 13M and 20M ribbed GFRP bars, and 12M and 20M sand-coated GFRP bars were tested with surface contamination from two common materials used in concrete placement: form oil and concrete splatter. Additionally, …

    waterloo Repository record for Effect of Construction Contaminants on the Bond-Slip Behaviour of GFRP Reinforcing Bars (opens in a new tab)

  3. Investigation of bond slip between concrete and steel reinforcement under dynamic loading conditions

    … investigate the dynamic interaction (bond slip) of reinforcement with concrete and gain a better understanding of the parameters that control this interaction. Specifically, the effects of concrete confinement, bar deformation and bar diameter on the bond slip, and the influence of …

    lsu-thes Repository record for Investigation of bond slip between concrete and steel reinforcement under dynamic loading conditions (opens in a new tab)

  4. An investigation of bond-slip behavior of reinforcing steel subjected to inelastic strains

    <p>Longitudinal bar slip resulting from strain penetration at the end of flexural concrete members will result in a member end rotation and additional lateral deformations in members such as walls, columns and beams. The contribution of these member end rotations can account for as much as 35 …

    iastate Repository record for An investigation of bond-slip behavior of reinforcing steel subjected to inelastic strains (opens in a new tab)

  5. Prediction of Steel Force Distribution in Reinforced Concrete Members From Bond-Slip Characteristics

    Made available in DSpace on 2014-12-08T23:56:21Z (GMT). No. of bitstreams: 1 6511759.pdf: 8350412 bytes, checksum: c06df35e4168b8f3276e2a3fa3cc6e6b (MD5) Previous issue date: 1965

    uiuc Repository record for Prediction of Steel Force Distribution in Reinforced Concrete Members From Bond-Slip Characteristics (opens in a new tab)

  6. Embedded Reinforcement and Bond-Slip in the Nonlinear Finite Element Modelling of Reinforced Concrete

    … reinforced concrete structures including bond-slip effects. It deals with three aspects of the numerical computation, i. e. modelling techniques, material behaviour and solution techniques. The modelling techniques concerned the reinforcement and bond-slip. Two embedded reinforcement …

    glasgow Download PDF for Embedded Reinforcement and Bond-Slip in the Nonlinear Finite Element Modelling of Reinforced Concrete (opens in a new tab)

  7. Fiber reinforced concrete : characterization of flexural toughness & some studies on fiber-matrix bond-slip interaction

    … process, including progressive interfacial debonding, Poisson's effect, and variation in interfacial properties during the fiber pullout process. Interfacial debonding is modeled using an interfacial shear strength criterion. Influence of normal contact stress at the fiber-matrix interface is …

    ubc Repository record for Fiber reinforced concrete : characterization of flexural toughness & some studies on fiber-matrix bond-slip interaction (opens in a new tab) Download PDF for Fiber reinforced concrete : characterization of flexural toughness & some studies on fiber-matrix bond-slip interaction (opens in a new tab)

  8. Evaluation of surface roughness and bond-slip behavior of new textured epoxy-coated reinforcing bars

    … smooth epoxy coating significantly reduces the bond between concrete and reinforcing steel, which often results in the early development of transverse cracks in bridge decks. To solve this problem, the Illinois Department of Transportation (IDOT) proposed a new type of textured epoxy-coated …

    uiuc Repository record for Evaluation of surface roughness and bond-slip behavior of new textured epoxy-coated reinforcing bars (opens in a new tab)

  9. Nonlinear Finite Element Analysis of FRP-reinforced Concrete Beams under Ambient and Elevated Temperatures

    … beams are not without deficiencies, such as bond-slip behaviour and the vulnerability to high temperatures. Although research on the structural behaviour of FRP-reinforced concrete beams under ambient conditions has been reported, studies on these beams affected by bond-slip and elevated …

    unsw Repository record for Nonlinear Finite Element Analysis of FRP-reinforced Concrete Beams under Ambient and Elevated Temperatures (opens in a new tab)

  10. Shear Behavior of Prestressed Concrete Girders and Structural Health monitoring using Fiber Bragg Grating Sensors

    … with AASHTO specification. These were tested for bond slip behavior and with minimum reinforcement. The primary objective was to investigate the type of failure in all the girders. It was found that all of them failed in web shear and none in bond slip. One of the girders also had Fiber Bragg …

    houston Repository record for Shear Behavior of Prestressed Concrete Girders and Structural Health monitoring using Fiber Bragg Grating Sensors (opens in a new tab)

  11. Bond behavior of advanced fiber reinforced composite-concrete joints

    “Externally bonding advanced composite materials to concrete structures is an effective way to improve their strength, ductility, and durability. The interfacial bond behavior is fundamental to understand the overall structural performance of concrete structures strengthened with advanced composite …

    must-thes Repository record for Bond behavior of advanced fiber reinforced composite-concrete joints (opens in a new tab)

  12. ANALYTICAL MODELING OF REINFORCED CONCRETE BEAM COLUMN CONNECTIONS FOR SEISMIC LOADING

    … consequence, they can experience high shear and bond slip deformations that contribute significantly to the story drift. Moreover, the joint capacity may be exceeded leading to a joint shear failure that can have a major impact on the overall stability of the entire structure. This condition is …

    mcmaster Repository record for ANALYTICAL MODELING OF REINFORCED CONCRETE BEAM COLUMN CONNECTIONS FOR SEISMIC LOADING (opens in a new tab)

  13. Failure Mechanisms and Key Parameters of FRP Debonding from Cracked Concrete Beams

    Intermediate crack (IC) induced debonding failure of Fiber Reinforced Polymer (FRP)-strengthened reinforced concrete beams starts at the tip of flexural/shear cracks within the shear span and propagates towards the FRP plate termination. In this study, experimental and numerical programs are …

    marquette Repository record for Failure Mechanisms and Key Parameters of FRP Debonding from Cracked Concrete Beams (opens in a new tab)

  14. Nonlinear Finite Element Analysis of FRP-strengthened Concrete Slabs under Static and Traffic Loads

    … concrete (RC) structures as externally bonded materials for retrofitting. A number of researches on the FRP-strengthened RC slabs have been conducted in recent years. However, investigations of overall performance and the bond-slip behaviour between FRP and concrete of FRP-strengthened …

    unsw Repository record for Nonlinear Finite Element Analysis of FRP-strengthened Concrete Slabs under Static and Traffic Loads (opens in a new tab)

  15. Polyurethane Fiber Reinforced Polymer Strengthening of Shear Deficient Reinforced Concrete Beams

    The use of externally-bonded fiber-reinforced polymer (FRP) composites has been established as an effective means for the strengthening of shear-deficient reinforced concrete (RC) flexural members. Epoxy-based wet layup systems were predominantly employed in previous studies. In this study, carbon …

    ucf Repository record for Polyurethane Fiber Reinforced Polymer Strengthening of Shear Deficient Reinforced Concrete Beams (opens in a new tab)

  16. An Analytical Study on the Behavior of Reinforced Concrete Interior Beam-Column Joints

    … can be used to study the flexural-shear-bond interaction, the failure modes, and sensitivity of various parameters of structural elements. Most of the existing analytical approaches for interior BC joints have either failed to account for the cyclic bond-slip behavior and the triaxial …

    vt Repository record for An Analytical Study on the Behavior of Reinforced Concrete Interior Beam-Column Joints (opens in a new tab)

  17. Experimental and analytical investigations on bond of reinforcement and nonlinear response of reinforced concrete columns

    Bond of reinforcement has a major influence on the behavior of reinforced concrete (RC) structures. Even though bond has been extensively studied over the past decades, there are still a number of knowledge gaps requiring investigation. This dissertation presents three studies related to the basic …

    texas Repository record for Experimental and analytical investigations on bond of reinforcement and nonlinear response of reinforced concrete columns (opens in a new tab)

Page 1 of 8