Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 72 for “"Bonding agent"”.
-
An in vivo and in vitro study of a new orthodontic bonding agent
… XT, or APC Plus and debonded 30 minutes after bonding. In the second three groups, brackets were bonded with Concise, Transbond XT, or Concise and debonded after thermocycling. The in vivo study consisted of 31 patients and a split arch technique was utilized. Adhesives used were APC Plus and …
-
Development of a novel dentin bonding agent and testing for mechanical properties, mircroleakage and toxicity
<p>In this study a dentin bonding agent based on Tolylene diisocyanatc with o chlorophenol as a blocking agent was tested. Bond strength with dentin was determined using a clinically relevant test method. A comparison was made using commercially available bonding agents and restorative resins. A …
-
Effect of a Hydrophilic Bonding Agent on Shear Bond Strength to Water and Saliva Contaminated Enamel
… a new commercially available hydrophilic enamel bonding agent to that of a standard hydrophobic enamel bonding agent, and to measure the effects of water and saliva contamination on shear bond load. The introduction of composite resin in direct bonding has improved the clinical practice of …
-
INFLUENCE OF USING BONDING AGENT AND SHEAR STUDS ON BOND STRENGTH OF CONCRETE OVERLAYS ON PRESTRESSED SLABS
This study explores the effects of using bonding agent and shear studs in conjunction with a defined surface roughness condition on the bond strength of concrete overlays poured over prestressed concrete slabs. The shear bond and tensile bond strengths are tested for seven cases by using Double-L …
-
Coronal microleakage of a dentin bonding agent when used in the presence of a eugenol containing endodontic sealer
… ethyl alcohol and chloroform, prior to dentin bonding in the coronal chambers of endodontically treated teeth obturated with either a eugenol or resin-based sealer. A total of 156 extracted human molar teeth were divided into 6 groups and obturated with either a eugenol-based (Roth's, …
-
Effects Of Light Curing Bonding Agent With Dual Cure Cement On The Retention Of Zirconia And Lithium Disilicate Crowns: An In-Vitro Study.
… X Ultimate (RXU; 3M Oral Care) were used for bonding the zirconia and lithium disilicate crowns to natural teeth using three different methods: 1) light-curing of adhesive and cement, 2) light curing of adhesive through the crown, or 3) complete chemical- cure (no light cure). Each crown was …
-
An in Vitro Comparative Study of Three Commonly Used Methods of Bonding Metal Orthodontic Brackets to Tooth Enamel
… commonly used orthodontic techniques for direct bonding of metal brackets to tooth enamel were compared in this study. Each bonded bracket was stressed to failure in tension and this measurement was recorded. The bracket was then examined to determine exactly what interface failed the …
-
Evaluating Pit and Fissure Sealant Materials When Used as Bonding Agents in Preventive Resin Restorations
… tooth is etched, followed by an application of a bonding agent, filled with composite, and then sealed with a pit and fissure sealant. In an attempt to simplify the protocol of the PRR this study was designed to determine if pit and fissure sealant material could serve a dual role and eliminate …
-
Strength Of Self-Adhesive Resin Cements To Shortened Zirconia Crowns With And Without An Additional Coat Of Adhesive
… they do not require a separate etch, primer, or bonding agent to bond to the tooth or crown surfaces. However, the use of an adhesive bonding agent with a self-adhesive resin cement has been claimed to improve its bond strength. The objective of this study is to compare the retention bond …
-
Μελέτη in vitro της οριακής μικροδιείσδυσης υαλοιονομερών κονίων και σύνθετων ρητινών με τη χρήση συγκολλητικών παραγόντων σε κοιλότητες Vης ομάδος
… SILUX + SCOTCHBOND 2, SILUX + EXPERIMENTAL BONDING AGENT, SILUX + TENURE, HELIOSIT + ADHESIT, HELIOS + EXPERIMENTAL BONDING AGENT AND KETAC FIL GLASS IONOMER RESTORATIVE MATERIAL. THE SPECIMENS AFTER THEIR RESTORATIONWERE PROCESSED TO THERMOCYCLING AND THEN REMAIN IN AN INDIA INK SOLUTION AT …
-
Microleakage of self-etching sealants on dry and saliva contaminated enamel.
… pumice, phosphoric acid etched, rinsed, drying agent applied, sealant placed (UltraSeal XT plus) and light cured. Teeth in groups 3 and 4 were sealed using the same steps as groups 1 and 2 with the addition of a bonding agent placed underneath the sealant. Teeth in groups 5 and 6 were cleaned …
-
Vergleichende Untersuchung zur Wirksamkeit eines Bonders in unterschiedlichen Cobalt-Chrom-basierten Metall-Keramik-Systemen bezüglich ihrer Temperaturwechsellastbeständigkeit
… as well as the possibly beneficial effects of a bonding agent. Furthermore, the effects of a higher wash-firing temperature, a slowed down cooling after firing and the storage in a corrosive solution were analysed. 24 test series, consisting of six incisor crowns and a bridge each, were …
-
Effectiveness of fluoride containing bonding resins in preventing demineralization of enamel during orthodontic treatment.
… of Pro Seal and Opal Seal, two fluoridated bonding agents, to Assure, a nonfluoridated bonding agent, in preventing demineralization during orthodontic treatment. Methods: 26 patients beginning comprehensive orthodontic treatment were divided into 3 groups. 9 patients were bonded with Assure …
-
The Effect of Topical Fluorides on the Microleakage of Sealants
… groups of sealants; a group bonded with a dentin bonding agent (DBA), and a group bonded without a DBA after exposure to a variety of topical fluorides. Materials and Methods: Extracted, human molars were placed into 8 groups. Half of the groups contained sealants that were bonded with a DBA and …
-
Effects of Temperature on the Emission Rate of Formaldehyde from Medium Density Fiberboard in a Controlled Chamber
… at high temperatures held together with a bonding agent. This bonding agent is often formaldehyde-containing resins that are known to release formaldehyde over time. This is concerning because of the carcinogenic classification of formaldehyde, the wide spread application of composite wood …
-
Effect of surface conditioning and storage time on the bond strength of orthodontic brackets to lithium disilicate ceramic
… 60 seconds 9.5% HF plus a low-viscosity enamel bonding agent; 20 seconds non-thermal plasma (NTP) only. All samples were further treated with a silane coupling agent prior to bonding with an orthodontic resin cement and were stored in distilled water at 37°C for 30 minutes, 24 hours and 6 months …
-
Bonds And Contact Angles Produced With Surface Alterations To Lithium Disilicate
… and silane in various combinations followed by a bonding agent, according to the manufacturer's protocols. A cylinder of composite of diameter (1.5mm) was bonded to the cured adhesive and specimens were stored for 24 hours. In the next part of the study; saliva, collected from a single participant …
-
Integrated Marketing Communication as Epideictic Rhetoric and Its Implications for Ethical Branding
… branding discourse in action with texture as the bonding agent between the brand and audience, thereby, opening a dialogue to conduct IMC within an ethical framework in a dynamic global marketplace.</p>
-
TRANSPARENT CERAMICS & THEIR COMPOSITE SYSTEMS FOR PROTECTIVE WINDOW APPLICATIONS
… for targeted applications. A transparent bonding method was developed for the joining of transparent ceramics. Microstructural characteristics, as well as both mechanical and optical properties of the bond formed were also studied, with tests conducted in close relation to the environment …
Page 1 of 4