Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 81 for “"Bondline"”.
-
Characterization of the wood/isocyanate bondline
… a technique for probing the cure chemistry and bondline morphology of pMDI-bonded wood composites. A 99% ¹⁵N-enriched pMDI resin with desirable adhesive properties was synthesized. A series of model cellulose/¹⁵N-pMDI composites, cured as a function of cellulose precure moisture content, were …
-
Molecular investigation of the wood/pMDI adhesive bondline
… more molecular information about the pMDI-wood bondline, and to further improve the bonding performance. In order to correlate molecular phenomena with macroscopic performance of wood-adhesive bondline, low frequency molecular motions in wood were probed using dynamic mechanical analysis (DMA) …
-
Bondline temperature control using carbon fiber embedded resistive heaters
… control without placing thermocouples within the bondline, this research develops a method by which to estimate bondline temperatures using surface measurements. Additionally, it is shown that boundary control on an embedded heater can be used to control heat within a heater. This can be used to …
-
Role of contamination on the bondline integrity of composite structures
… investigation of the role of contaminates on bondline integrity.</p> <p>This dissertation focuses on assessing the contaminates effect on the adhesive bondline integrity. A combined experimental and numerical framework is developed to study the contamination effect on the adhesive mechanical …
-
Effects of Bondline Thickness on Nonlinear Interfacial Fracture of Bonded Adhesive Joint
A number of existing and emerging industrial applications are dependent on layered substrates through adhesive bonding. The interfacial fracture of adhesively bonded structures is a critical issue for its extensive applications to a variety of modern industries. In the recent two decades, cohesive …
-
ONSET OF KISSING BOND FORMATION FOR VARYING LEVELS OF BONDLINE CONTAMINATION IN CFRP
Carbon Fiber Reinforced Polymer or CFRP is an important and widely used material in the aerospace industry. CFRP utilizes adhesive bonding as the primary joining method and may suffer from a defect known as a kissing bond. This occurs when there is very close contact between the CFRP substrate and …
-
Near-threshold Fatigue of Adhesive Joints: Effect of Mode Ratio, Bond Strength and Bondline Thickness
… roughness (both affecting the bond strength), bondline thickness and load ratio. It was first required to understand how the adhesive system behaved under quasi-static loading by examining a fracture mechanics-based design approach for adhesive systems with different substrate materials and …
-
A Photoelastic Investigation into the Effects of Cracks and Boundary Conditions on Stress Intensity Factors in Bonded Specimens
… conducted. Photoelastic specimens containing a bondline are subjected to a constant displacement boundary condition created by bonded end grips. Specimens containing various crack orientations are analyzed to determine stress intensity factors at the induced crack tips. Specimens containing …
-
Moisture-Cure Polyurethane Wood Adhesives: Wood/Adhesive Interactions and Weather Durability
… of isocyanate cure chemistry in wood bondline. MPUR and a CPUR were employed to investigate whether wood/adhesive interactions influence PUR properties. Wood interactions significantly altered PUR hard/soft domain size distribution (atomic force microscopy, AFM), thermal transition …
-
Fusion bonding of reinforced thermoplastic
… The influence of laminate type, testing rate, bondline thickness and overlap length on joint strength were investigated, and the results from these tests are presented In order to enable mathematical modelling of fusion joints to be carried out, the shear stress-strain curve of the reinforced …
-
Stress Intensity Factor Distributions in Bimaterial Systems - A Three Dimensional Photoelastic Investigation
… bimaterial specimens, suggesting the presence of bondline residual stresses (rather than elastic modulus mismatch) as the primary contributing factor. The second series of tests involves the bonding of mutually translucent photoelastic materials whose elastic module differ by a ratio of …
-
BOND STRENGTH EVALUATION IN ADHESIVE JOINTS USING NDE AND DIC METHODS
… defects such as kissing or weak bonds in the bondline interface. Also, there are shortcomings of existing non-destructive evaluation (NDE) methods to non-destructively detect/characterize these interfacial defects and reliably predicting the bond shear strength. As a result, adhesive bonding …
-
Nondestructive inspection and characterization of complex engineering materials via ultrasound techniques.
… technique for inspecting damage at the bondline between a carbon fiber reinforced laminated composite and aluminum. The sample was inspected from both the aluminum side as well as from the composite side, and the areas of delamination were successfully identified. The novelty of this …
-
Studies of PF Resole / Isocyanate Hybrid Adhesives
… wood specimens indicated the dependence of bondline fracture energy on the blend ratio. The 75/25 PF/PMDI blend exhibited a high fracture energy with a fast cure speed and processable viscosity. Exposure to water-boil weathering severely deteriorated the fracture energies of the hybrid …
-
Durability of adhesive joints between concrete and FRP reinforcement in aggressive environments
The durability of the bondline between concrete and its fiber-reinforced polymer reinforcement was characterized at various temperature and humidity levels. The bondline consisted of an epoxy primer, an epoxy putty and an epoxy saturant. In principle, fracture could occur anywhere in this bondline, …
-
Nanocharacterization of Composite Adhesive Bonding Systems
… including the matrix resin, adhesive, and bondline mixing zones (interface/interphase). Adhesive regions in cobonded systems were found to have distinct nanomechanical properties. Regions with a higher degree of comingling between adhesive and resin materials, in general, were found to have …
-
Assessment of adhesively bonded connections for marine applications
… decreases in a linear manner with the adhesive bondline thickness and a failure mechanism of the joint is proposed thanks to experimental results and finite element analysis. The local fracture-based approach deals with the assessment of fracture toughness of Double Cantilever Beam (DCB) …
Page 1 of 5