Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 47 for “"Bone scaffold"”.

  1. DUAL USE OF BONE SCAFFOLD FOR ANTIBIOTICS DELIVERY DELAYS THE ONSET OF OSTEOMYELITIS

    … a dual platform device designed to promote bone healing and deliver antibiotics to prevent OM, addressing the limitations of current osteogenic implants that lack antimicrobial properties. 23 goats were allocated into four treatment groups: 1) SA: scaffolds loaded with Vancomycin (n=5); 2) …

    ut-knoxville Repository record for DUAL USE OF BONE SCAFFOLD FOR ANTIBIOTICS DELIVERY DELAYS THE ONSET OF OSTEOMYELITIS (opens in a new tab)

  2. Additive manufacturing of stiffness optimised auxetic bone scaffold using cobalt-chromium-molybdenum superalloy

    … tissue engineering constructs, such as bone scaffolds for critical-size defects. Emerging early-stage studies have shown the potential of auxetic architecture in increasing cell proliferation and tissue reintegration due to their −𝜐. However, research on the development of stiffness …

    wlv Repository record for Additive manufacturing of stiffness optimised auxetic bone scaffold using cobalt-chromium-molybdenum superalloy (opens in a new tab) Download file for Additive manufacturing of stiffness optimised auxetic bone scaffold using cobalt-chromium-molybdenum superalloy (opens in a new tab)

  3. Additive manufacturing of triply periodic minimal surface informed load bearing stiffness matched tibial bone scaffold

    … thesis investigates the development of titanium scaffolds based on Triply Periodic Minimal Surface (TPMS) structures to create bone implants that effectively match the mechanical properties of the tibia. The primary goal is to design and fabricate titanium (Ti6Al4V) scaffolds that provide optimal …

    wlv Repository record for Additive manufacturing of triply periodic minimal surface informed load bearing stiffness matched tibial bone scaffold (opens in a new tab) Download file for Additive manufacturing of triply periodic minimal surface informed load bearing stiffness matched tibial bone scaffold (opens in a new tab)

  4. Optimization of Calcium Aluminate for use as a Bone Scaffold Material Through Physical and Chemical Surface Modification

    … were tested as biomaterials and show promise as bone scaffolds. Initial concerns of biocompatibility led the field to focus on calcium phosphates. Here, the work focused on improving the biocompatibility and creating an optimized calcium aluminate biomaterial. To accomplish this, the physical and …

    duquesne Repository record for Optimization of Calcium Aluminate for use as a Bone Scaffold Material Through Physical and Chemical Surface Modification (opens in a new tab)

  5. A mechanical and biological evaluation of calcium polyphosphate as a structural bone scaffold in revision total hip replacement

    … uses the addition of morsellized cancellous bone (MCB) for filling bone defects and to encourage new bone growth, however problems associated with allograft include limited availability, disease transmission and implant migration. The use of synthetic scaffolds as a substitute material is …

    ubc Repository record for A mechanical and biological evaluation of calcium polyphosphate as a structural bone scaffold in revision total hip replacement (opens in a new tab) Download PDF for A mechanical and biological evaluation of calcium polyphosphate as a structural bone scaffold in revision total hip replacement (opens in a new tab)

  6. DEVELOPMENT OF A DUAL MICROENVIRONMENTAL BIPHASIC CONSTRUCT FOR OSTEOCHONDRAL TISSUE REGENERATION

    … composed of articular cartilage and subchondral bone region. This study aimed to develop a dual microenvironmental biphasic construct for osteochondral tissue engineering and was grouped into three stages: (1). Optimization of the subchondral bone scaffold; (2). Development of hydrogel for …

    nus Repository record for DEVELOPMENT OF A DUAL MICROENVIRONMENTAL BIPHASIC CONSTRUCT FOR OSTEOCHONDRAL TISSUE REGENERATION (opens in a new tab) Download file for DEVELOPMENT OF A DUAL MICROENVIRONMENTAL BIPHASIC CONSTRUCT FOR OSTEOCHONDRAL TISSUE REGENERATION (opens in a new tab)

  7. Mechanical and Cellular Response to Biomineralization of Ovalbumin Scaffolds for Bone Tissue Engineering

    … the feasibility of ovalbumin (OVA) as a bone scaffold material have found its cost, availability, interaction with cells, and ability to degrade in the body into safe byproducts to be ideal for such an application. However, weak mechanical properties cause hesitation in the use of OVA as …

    vt Repository record for Mechanical and Cellular Response to Biomineralization of Ovalbumin Scaffolds for Bone Tissue Engineering (opens in a new tab)

  8. FABRICATION AND CHARACTERIZATION OF PHOTO-CROSS-LINKABLE NANOCOMPOSITE SCAFFOLDS FOR BONE TISSUE ENGINEERING

    The large-scale bone defect is one of the biggest challenges in orthopedic surgery. Here, we proposed to use the photocrosslinkable nanocomposites for the fabrication of the bone scaffold and artificial periosteum. Firstly, we prepared nanocomposite ink composed of tri-block polymer and …

    nus Repository record for FABRICATION AND CHARACTERIZATION OF PHOTO-CROSS-LINKABLE NANOCOMPOSITE SCAFFOLDS FOR BONE TISSUE ENGINEERING (opens in a new tab) Download file for FABRICATION AND CHARACTERIZATION OF PHOTO-CROSS-LINKABLE NANOCOMPOSITE SCAFFOLDS FOR BONE TISSUE ENGINEERING (opens in a new tab)

  9. Development of a Novel Porogen Insertion System Used in Solid Freeform Fabrication of Porous Biodegradable Scaffolds with Heterogeneous Internal Architectures

    … particles within internal structure of the bone scaffold. The proposed system would be integrated with a 3D printing machine to create macro-pores based on the conventional porogen leaching method. The system is capable of inserting porogens on pre-designed locations within the scaffold …

    waterloo Repository record for Development of a Novel Porogen Insertion System Used in Solid Freeform Fabrication of Porous Biodegradable Scaffolds with Heterogeneous Internal Architectures (opens in a new tab)

  10. Modulating Oxygen and Reactive Oxygen Species Signaling in Bone Tissue Engineering: From a Theoretical Framework to Scaffold Development

    … oxygen (O2) and reactive oxygen species (ROS) in bone tissue engineering, and their critical involvement in bone regeneration. Oxygen-generating scaffolds (OGS) have been developed to enhance healing processes, signaling an evolving field. To achieve next-generation OGS designs, not only should …

    jhu Repository record for Modulating Oxygen and Reactive Oxygen Species Signaling in Bone Tissue Engineering: From a Theoretical Framework to Scaffold Development (opens in a new tab)

  11. The Synthesis, Characterization, and Cell Seeding of a Collagen/Hydroxyapatite Porous Scaffold for Treatment of Osseous Defects

    The need for finding a bone graft substitute stems from the fact that approximately 200,000 bone grafting procedures are performed annually in the U.S. alone. Although biological grafting options (i.e. autografts & allografts) exist, they do suffer from inherent problems. These include limited …

    clemson Repository record for The Synthesis, Characterization, and Cell Seeding of a Collagen/Hydroxyapatite Porous Scaffold for Treatment of Osseous Defects (opens in a new tab)

  12. ENHANCING BIOPRINTING STRATEGIES TOWARDS THE DEVELOPMENT OF BIOMIMETIC OSTEOCHONDRAL TISSUE ENGINEERING SCAFFOLDS

    … cartilage and remodeling of the subchondral bone in the synovial joint. During early-stage osteoarthritis, the articular cartilage begins to degrade, the synovial joint space narrows, and the subchondral bone undergoes rapid bone turnover, leading to insufficient bone mineralization and …

    maryland Repository record for ENHANCING BIOPRINTING STRATEGIES TOWARDS THE DEVELOPMENT OF BIOMIMETIC OSTEOCHONDRAL TISSUE ENGINEERING SCAFFOLDS (opens in a new tab)

  13. Selective laser sintering of bioactive glass scaffolds and their biological assessment for bone repair

    "Bone scaffold fabrication using powder-bed based additive manufacturing techniques, like the selective laser sintering (SLS) process, provides control over pore interconnectivity, pore geometry, and the overall shape of the scaffold, which aids in repairing different regions of the bone. The main …

    must-thes Repository record for Selective laser sintering of bioactive glass scaffolds and their biological assessment for bone repair (opens in a new tab)

  14. Microstructure-induced capillary force effects on penetration and release in hydroxyapatite bone scaffolds

    Ceramic bone scaffolds with both microporosity (<50µm) and macroporosity (>100µm) are known to enhance bone formation. Including microporosity in a scaffold increases bone volume and distribution. The integration of the bone with the scaffold is also improved as both cells and mineralized bone have …

    uiuc Repository record for Microstructure-induced capillary force effects on penetration and release in hydroxyapatite bone scaffolds (opens in a new tab)

  15. The Advancement of Bacterial Cellulose As A Bone and Vascular Scaffolds

    … resorbable cellulose, a composite for bone applications, and a composite for a synthetic venous valve leaflet.</p> <p>BC can be produced and modified to perform as a degradable tissue scaffold. This is achieved by an oxidation procedure after the initial production and purification of …

    utk-theses Repository record for The Advancement of Bacterial Cellulose As A Bone and Vascular Scaffolds (opens in a new tab)

  16. MINERAL DISTRIBUTION SPATIALLY PATTERNS MESENCHYMAL STEM CELL BEHAVIOR ON MONOLITHIC BONE SCAFFOLDS

    The interfaces between soft tissue and bone at the ends of ligaments, tendons, and menisci, known as entheses, are characterized by their continuous apatitic mineral gradients. These interfacial tissues are essential to joint health, since they connect different tissues and mediate substantial …

    cornell Repository record for MINERAL DISTRIBUTION SPATIALLY PATTERNS MESENCHYMAL STEM CELL BEHAVIOR ON MONOLITHIC BONE SCAFFOLDS (opens in a new tab)

  17. Development of a Composite Tissue Engineered Alveolar Bone−Mucosal Model Using Conventional and 3D Printed Scaffolding Techniques

    … characterise a novel 3D composite human alveolar bone−mucosal model (ABMM) based on conventional and 3D printed bone scaffolds. Two types of bone scaffold were used: firstly, a conventional hydroxyapatite/tricalcium phosphate (HA/TCP) scaffold fabricated using an aqueous gel-casting method, and …

    whiterose Download PDF for Development of a Composite Tissue Engineered Alveolar Bone−Mucosal Model Using Conventional and 3D Printed Scaffolding Techniques (opens in a new tab)

  18. Development of a hybrid scaffold for cartilage tissue generation

    … chondrocyte cells onto the artificial bone scaffold base. In preparing the film, the concentration of the PVA and PEG stock solutions, the composition of PVA and PEG (by mass % ratio) in the film, and the thickness of the film were defined to be the design variables. The degradation …

    queens Repository record for Development of a hybrid scaffold for cartilage tissue generation (opens in a new tab)

  19. Synergizing angiogenesis and osteogenesis in a smart bone substitute

    … project was to develop a biologically active bone scaffold that could induce vascularization in critical-size defects (CSD) and hence bone formation. In this study, functionalization of three-dimensional (3D) printed biphasic calcium phosphate (BCP) scaffolds was investigated. The first …

    kings Repository record for Synergizing angiogenesis and osteogenesis in a smart bone substitute (opens in a new tab) Download PDF for Synergizing angiogenesis and osteogenesis in a smart bone substitute (opens in a new tab)

  20. Designing a Whey Protein Based Material as a Scaffold for Bone Regeneration

    … material was designed and optimized for use as a bone tissue regeneration scaffold. Whey protein isolate (WPI), the primary component of the material, underwent considerable testing for conformity to a set of known material characteristics required for application in bone regeneration. WPI gels of …

    lsu-thes Repository record for Designing a Whey Protein Based Material as a Scaffold for Bone Regeneration (opens in a new tab)

Page 1 of 3